Wireless Video Scanner


[aboxman] brought this nice wavecom jr mod to my attention. I first ran across scanning for wireless video signals a couple years ago when the X10 version came out. People were surprised at just how many video signals were flying through the air.This little project results in a unit that can scan a wide 2.3 to 2.7Ghz range. Of course, if you’re across the pond, you might want a european version.

11 thoughts on “Wireless Video Scanner

  1. Glad you could take a moment from your doubtless busy and fulfilling life to let us know how you feel there, derek. Good luck with that whole ‘puberty’ thing.

    A box like this could tell you if there is more than one kind of transmitter operating nearby!
    In the US many local law enforcement agencies still use a tiny slice of 2.4Ghz for surveillance purposes.

    I used to build surveillance gear. you’d be surprised at how many times they’ll cheap out and re-tune a commercial unit.

    Clever project and nice work too.

  2. To answer tassoman’s question, yes.
    I was tuning the modified Wavecom around the neighbors WiFi channel (2) at 2417 MHz and the tv screen started displaying white lines randomly. Went over and was able to correlate the tv interference to activity on the WiFi unit.

  3. The Systm hack is a smooth piece of work. I designed my mod to scan the whole band, not just the 4 factory channels. One way to get the best of both worlds, especially if you don’t want to build and program my VFO interface, is to go to this site – http://www.hamtvstore.com/html/special_offers_.html and buy their 13 cm receiver LCD package. That gives you a wide banded, programmable receiver with a SMA antenna connector for about $110.

Leave a Reply to N0QBHCancel reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.