Comments on: Punch your alarm clock

By: dillinjaxx

dillinjaxx — Mon, 27 Aug 2007 21:53:51 +0000

if i do this then i ll never wake up.:P

By: ret

ret — Sun, 26 Aug 2007 17:32:16 +0000

instead of a hg switch one could simply use a scheme found in many toys that employs a spring (could come from a cheap ballpoint pen or something) with a stripped wire inside.

By: Wolf

Wolf — Sat, 25 Aug 2007 18:10:13 +0000

Pretty neat, but for the price of one of those accelerometers, you could just buy a dozen or more regular alarm clocks and a good heavy mallet.

By: kersny

kersny — Sat, 25 Aug 2007 17:36:20 +0000

This Was already posted in April '05 by vince:
http://www.hackaday.com/2005/04/30/the-punchable-alarm-clock/

Still a good project, though.

By: strider_mt2k

strider_mt2k — Sat, 25 Aug 2007 16:01:45 +0000

Awesome project!

I hope the clock survives.

By: Vladsinger

Vladsinger — Sat, 25 Aug 2007 14:59:04 +0000

Regarding the durability question, you can set the level that it will take to trigger, so that a mere flick will turn it off. You don’t even need to hit the clock itself. Also, from the article: “The DE-ACCM is a good choice for this project because other vibration sensors such as mercury switches or reed switches only provide open or closed switch outputs, whereas the DE-ACCM provides a continuous analog voltage directly proportional to the intensity of the vibrations.”

By: richtastic

richtastic — Sat, 25 Aug 2007 11:18:23 +0000

i'll clarify what i meant.
take a $2 tilt switch from mouser.com and solder it to the same points the snooze button is soldered to.
hot glue the switch inside the case at just enough of an angle to not close the circuit. (use a battery and a led to get the angle right if you need to)
set the alarm and when it goes off a slight nudge should be enough to trip the switch, snooze'ing the alarm.

that will accomplish the same thing as this hack, shutting off the alarm by movement.

By: MRE

MRE — Sat, 25 Aug 2007 10:13:45 +0000

Richtastic: yeah.. much more simple/cheap solution. Ya know, it might also be interesting to use a dual point mercury switch.. and a circuit to check for oscillation.. you have to shake the ever living f*&k out of it to get it to turn off!!! could easilly do that with an accelo too… but it just seems a bit over the top for an alarm clock. I guess im just still used to the idea that accelos should be expensive heh.

By: Tony

Tony — Sat, 25 Aug 2007 10:10:05 +0000

If I am forced up by an alarm clock, I am extremely tired still. I won’t have the ability to aim my fist as I punch for the alarm clock. Most likely I’ll be punching my desk, or nightstand.

I can’t afford broken fingers…

By: poisonfist

poisonfist — Sat, 25 Aug 2007 10:02:41 +0000

Most of my wrecking crew at my martial arts school would destroy that thing with their first blow. Cool hack if it can sustain brutal beatings.

By: sackofcatfood

sackofcatfood — Sat, 25 Aug 2007 08:26:23 +0000

Regarding the problem of turning off your alarm clock in the morning–
Solution 1: Install an accelerometer.
Solution 2: Use a bigger mallet.

By: richtastic

richtastic — Sat, 25 Aug 2007 08:16:52 +0000

or you could just wire in a mercury switch / tilt switch. would work just fine for this application and would save the time building the “supporting circuitry”. also the cost would be substantially less.

By: n3rd

n3rd — Sat, 25 Aug 2007 07:28:15 +0000

I got a kick out of the videos of the mod in action.

By: JoeShlub

JoeShlub — Sat, 25 Aug 2007 07:21:10 +0000

First Post!

Cool, but I just had to repair my alarm clock because shit came loose since I pound the snooze button hard enough already. It seems that this mod would be fun until you destroyed the entire clock in a short period of time.