When we saw this giant home vacuum tube, we thought it would go perfectly along side the giant LED lamp . Constructed from spare computer parts, a glass display dome and some EL wire, it is fairly convincing looking. If only he had shaped some characters with the EL wire, we could do a giant nixie tube project.
[Matt] sent us this very cool looking project called Illuminato. After brainstorming on how to improve upon the Arduino, and receiving lots of input on his ideas, [Matt] has put together this board that has several nice improvements. It has more I/O, more code space, faster serial communication speeds, built in PWM, and works with existing Arduino shields. Not only does it make these improvements, but it does it with style. The finish is quite nice, the layout is pleasing and it even has two rows of SMD LEDs on the back for some added geek cred. You can see a couple videos of it in action after the break.
Recently, a Japanese coder on the DCEmu Forums released Windows drivers for DualShock 3 controllers. While the drivers only support using the controllers over USB and not bluetooth, they do include force feedback and Sixaxis support. Included with the drivers is a configuration tool, and though it appears to be in Japanese there is some explanation of how to use it included in the forum post. We have not tested these personally, but you can try out the drivers for yourself by downloading them from the forum here.
[photo: William Hook]
[Peter] sent in this really slick project where he ads an FD lens mount to a cannon EOS D60. He already had a collection of nice lenses and didn’t want to waste them. After finding some a donor camera for the FD mount, he purchased a cheap D60 to graft it onto. While his first impulse was to simply glue the new mount onto the front of the camera, it was evident that this would hold the lenses too far from the sensor. The camera went under a bit for a while and luckily, no real damage was done to the mirror housing. The final result seems to work very well, there are example galleries available on his site.
The N8VEM is a homebrew computer project based on the classic Z80 microprocessor. It’s designed to be easy to build using large TTL DIP components instead of SMD devices. It runs the CP/M operating system and all drives are virtual in RAM/ROM. While the base hardware is interesting, we really like the potential for expansion using a backplane. Have a look at the project’s Hardware Overview to see extra boards like the bus monitor and the prototyping board. We found out about this project on [Oldbitcollector]‘s blog; he’s using a Parallax Professional Development Board to create a VT100 terminal for the N8VEM.
[jefffolly] published some straight forward plans for a passive volume control. It uses a resistive ladder built across the contacts of 12W rotary switches. Each resistor provides a 5dB difference, and he recommends using 0.1% tolerance resistors to maintain accuracy. The use of discrete resistors instead of volume pots means that the output is much more predictable. All of the RCA sockets were connected using oxygen-free copper wire.
[John] has been working with several BlinkM RGB devices. He’s created a controller to talk to each of the BlinkMs wirelessly and change their behavior. The core is an old relay tester box used to test telephone circuits. Each of its four knobs are connected to the analog inputs on the Arduino. The signal is transmitted using RFlink devices. Each BlinkM is paired with an ATmega168 and receiver. The control box also has a switch to send the same signal to all of the devices at the same time. The transmit and receive code are available on his site. You can find a video of it embedded below.
The RepRap project has made heavy use of the Solarbotics GM3 Gearmotor as part of their extruders. Unfortunately they’ve proven to be underpowered for the task and the plastic gears could cause future problems. [Zach] decided to investigate some other options. He bought a pile of motors from Kysan to try out. He posted a teardown of one of the motors on Flickr. He found it not only easy to disassemble, but the metal gears were also easy to put back together. Next up is testing it on the machine.
Hack a Day serves up fresh hacks each day, every day from around the web as well as hacking related news.
