The first talk of ShmooCon was [Ethan O'Toole] and [Matt Davis] presenting their OpenVulture software for unmanned vehicles. In the initial stages, they had just planned on building software for Unmanned Aerial Vehicles, but realized that with the proper planning it could be used with any vehicle: airplanes, cars, boats, and subs (or more specifically, their Barbie PowerWheels). The software is in two parts. First is a library that lets you communicate with each of the vehicle’s modules. The second half is the actual navigation software.
They’ve spent a lot of time sourcing hardware modules. They are looking for items that work well, aren’t too expensive, and have a fairly plug and play implementation. For their main processor, they wanted something that wasn’t a microcontroller and could run a full Linux system. The ARM based NSLU2 NAS seems to be the current frontrunner. You can find the opensource software and descriptions of the supported modules on their site.
They’re building the first test UAVs now. One has a 12 foot wingspan for greater lift and stability. We’ve covered the Arduino based Ardupilot and other UAVs in the past.
For those who enjoy photography, a ring light is a nice tool to have. Being hackers, making your own seems only logical. This writeup will take you through the process of making one from fiber optics for super cheap. They basically gutted some fiber optic toys and strapped them to the lens. Sure there was a little more work involved, but that’s the gist of it. You may recall some more in depth fiber optic ring lights using LEDs or cold cathodes that we covered before.
[MikeFez] sent in this info about his augmented FPS set ups. He started this project back with an original XBox in 2006. He wanted a more immersive way of interacting with his games. Pointing out that gaming visuals and interactivity have come leaps and bounds while the controllers themselves have basically just added a few buttons, he explains his goals. He wanted to have to move his body to move his character and possibly physically aim. The original project, for the XBox, was successful in that he used a floor pad to control his character. Since then, the Wii has come out and he has moved to the PC as his main platform. As expected, he is now using the Wiimote as the aiming device.
The registration desk hasn’t opened yet at ShmooCon 2009, but we’re already running into old friends. We found [Larry Pesce] and [Paul Asadoorian] from the PaulDotCom Security Weekly podcast showing off their latest ShmooBall gun. ShmooBalls have been a staple of ShmooCon from the very beginning. They’re soft foam balls distributed to each of the attendees who can then use them to pelt the speakers when they disagree. It’s a semi-anonymous way of expressing your dismay physically. [Larry] has been building bigger and better ways to shoot the ShmooBalls for the last couple years. You may remember seeing the 2008 model. This year the goal was to make the gun part much lighter. The CO2 supply is mounted remotely with a solenoid valve and coiled air line. The pistol grip has a light up arming switch and trigger. The gun is fairly easy to transport: the air line has a quick disconnect and the power is connected using ethernet jacks.
TinkerKit is a collection of 20 different sensors and 10 actuators. It’s meant to make prototyping of physical computing devices much quicker/easier. The devices plug into a Sensor Hub Arduino shield. There is also a similar hub board that can emulate a keyboard; it translates sensor input directly to key strokes. It looks like a very ambitious project and it’s still in development. We love the idea though and think the wide variety of components will foster better final designs. The TinkerKit site covers the current component lineup and there’s a demo video embedded below.
It seems some enterprising individual in Grand Forks, North Dakota has been placing fake parking violations on cars. If the recipient visited the URL on the flyer, they would be told to install a toolbar to view pictures of their vehicle. That piece of malicious software would then attempt to install several more. The actual vehicle pictures were from Grand Forks, but we wouldn’t be surprised to see a similar attack happen in a much larger city.
SparkFun has been selling button pad parts for some time and we used them in our RGB door lock project. A excellent part, but you needed to implement your own interface to use the boards. SparkFun has just released two additional versions to make it easier on builders. The first is their Button Pad Controller USB. It has a 4×4 grid of buttons lit by RGB LEDs and a USB interface. This board can be expanded using the Button Pad Controller SPI. The SPI bus means it should be easy to add the button pad to embedded projects. This newest release puts you much closer to building your own RGB monome clone or other custom controller than ever before. The unit pictured above is their own project and they have no plans on selling anything like it.
[prabbit22m] has written an instructable on how to build a radio controlled sphere. The mechanism is fairly simple, with one drive motor, one servo and a gyro for stability. To turn, the servo shifts the center of gravity off to one side. You can see that the system works pretty well in the video above. If it didn’t have that gyro, it would be insane, believe us, we’ve done our own experimenting. If you like this, but want more features, check out this one that has a camera and takes pictures wherever it goes. We can’t forget Swarm either. The autonomous swarm of robot spheres. Of coarse [prabbit22m] might have the best idea of all. Dress it up as a regular ball to mess with people.
