Have you ever wondered how high or how fast a model rocket goes when you launch it? [sprite_tm] did, so he decided to build a low cost, lightweight data logger that he could fit into the nose cone of his rocket. To keep the circuit small, he built it around the popular ATtiny13 microcontroller. The microcontroller collects data from a Freescale MMA7260, a 3-axis accelerometer that he extracted from a third-party Wii nunchuck controller. After the microcontroller collects the data, it’s stored in 32K of EEPROM on a 24C256. All of this is powered by a small 3.6v Li-ion battery, which is the largest part of the circuit. If this sounds like something you’d like to make, he has detailed instructions along with the software used available on his site. While we don’t launch a lot of model rockets here, we may soon start just so that we have an excuse to build this.
Now that the Nintendo DSi has been officially released in the US, the team at iFixit has worked their magic. That magic being: completely disassembling it. They found the new 840mAh battery to be much smaller than the DS Lite’s 1000mAh. The device features two cameras, but both are a paltry 0.3megapixels. They note that this is the first Nintendo device that they’ve taken apart that didn’t require a tri-wing screwdriver.
Many more DSi compatible flash carts are available now than our initial report in December, so you can pick up a Nintendo DSi for homebrew without worry.
We know it was just two days ago that we were ranting about the hexapods known as Phoenix, and their creator [Zenta]. In the comments on that post, [Bluehash] pointed us to [Zenta's] latest creation. This is A-pod. The sheer articulation and believable motion here made this robot worthy of a post all it’s own. A-pod has a 2 dof “tail” and a 3 dof head with a total of 25 servos to drive it. The addition of the head adds so much character, add some face tracking and it would really blow us away. Well, after it fetched us a beer. He notes that he’s still working on the leg mechanicals, so it doesn’t do much walking yet.
[Sean] wrote in to tell us about this hack he did to modify a consumer sonicator for lab use. Sonication is often used in labs to aid in mixing in difficult containers or to add energy for certain events. He’s a chemist on a budget, so he couldn’t necessarily afford a nice industrial one. Instead, he found a sonic jewelry cleaner. The main shortcoming of the consumer level one is the fact that it can only go for 3 minute intervals. He needed up to an hour at a time. His solution was fairly simple, he closed the circuit to force it to be continually in the on position, then added a timer in the power line. He notes, that the consumer model wasn’t made to be run this long and could possibly produce enough heat to damage itself. It should not be turned on, then left alone.
We’ll file this one under “creepy yet amusing”. You can now order a MechRC robot with a 3d replica of your own head mounted to it. The site thatsmyface.com is offering this as a product. Simply take some pictures of your face upload them and mark some options. They’ll send you your robotic replica, ready to go. As they point out at botjunkie, they’ll put any face on there that you have some decent pictures of. That’s even creepier.
[Ben Heck] has just completed one of his more unique laptop game consoles. This time around it’s a Commodore 64, which he’s been attempting since 2006. Recently he scrapped everything and started fresh on what turned out to be the fastest build yet. While it certainly looks similar to his other laptops, he put in a lot of effort to give it the appearance of an 80′s computer from the beige color to the texture. He used an original C64C motherboard since it was the final and smallest revision and coupled that with an original keyboard. A 1541-III-DTV allows use of an SD card as a floppy device. Just drag any disk image onto the card and it’s ready to go. Check out a video of it in use below.
[PodeCoet] sent in this mod he did to a Spider Fire flashlight. These things are unbelievably bright, they use Cree LEDs that are so intense, they can ignite paper. [PodeCoet] notes that they run on fairly expensive batteries. Instead of buying some rechargeable ones, he decided to customize and hack his torch. He added a custom charging circuit and a Lilon battery as well as a boost-converter circuit and a status LED. We like the idea of having a rechargeable lamp, but he has lost his water proofing. If anything, you should go there to see his nicely done smd charger pcb as well as the pictures of his test run, burning some paper.
As some people have pointed out in the comments, this flashlight could not have started that fire. This one could though.
