Home made R/C system

[dunk] sent his home made Radio Control system. It is constructed from a Playstation 2 controller, an Atmega 2561, microcontroller, some RF modules and various servos and motors. It seems to work pretty well. You can get all the schematics and source code on his site. Several people have submitted a similar project which involves an iPhone and a helicopter, but that one is a bit dubious, mainly due to it’s lack of detail.

Comments

  1. benjo says:

    Cool!

  2. QuantumRand says:

    I’ve been wanting to start working with microcontrollers for wireless purposes for a while now, but I really dont know where to start.

    I’d like to put together a cheap FM transmitter/reciever (or bluetooth if cheap enough) solution to add a remote lock system to my car.

    I’m familiar with c++ and could learn c# easy enough, but I dont really know how to work with programmable microcontrollers.

    If anyone wants to help, please email me at audrino [at] quantumrand.net

    Thanks!

  3. rasz says:

    Atmega 2561??? lol
    its like building a Laptop inside RC plane to decode the signal

  4. Ricki says:

    This is cool, seems like a pretty clean implementation.

    quantumrand!

    You should look into Cypress microcontrollers.
    (That is also what he uses in the video)
    They have lots of different chips, bluetooth radios on chips half the size of my little finger nail. But what they have is an IDE that will help you a lot, I was used to sitting around setting up my µC for hours and trolling the internet for drivers to LCD’s, motors etc. they have all these build in.

    So get a development-kit, and buy a licence for their C compiler, its like $15 or so…you can also go Assembler thats free, but I dont like that, to low level.

  5. nebulous says:

    @ QuantumRand
    General microcontroller embedded programming, interfacing with electronics? Try Arduino. Look it up. You can get cheap kits, sometimes pre-assembled, and there are many hardware clones. It’s probably one of the easiest ways to get started.

    @ricki:
    This project uses an AVR microcontroller, which is cheap and fairly easy. It uses a Cypress radio transceiver, not a Cypress microcontroller.

    I’m currently looking to expand to direct AVR programming. I need a cheap ISP programmer. Apparently one can build a parallel port one with nothing more than 4 resistors (and the connectors), so I’ll be looking to do that :)

  6. QuantumRand says:

    Thanks for the input!

    I just noticed that I typo’d my email address though! How embarrassing, lol.

    It’s supposed to be arduino [at] quantumrand.net

  7. nebulous says:

    @ QuantumRand
    Good rule of thumb: If you ask for info in a public forum, expect to get answered in that forum.

    Anyway, get an Arduino (or similar, I have a Freeduino), get the Arduino IDE, and look at the examples given. Prototype shield + breadboard helps.

  8. QuantumRand says:

    @nebulous

    I figured most of the replies would be here. I’m just trying not to steal too much thunder from the actual post :)

    I’ll certainly look into the arduino some more.

  9. beano says:

    Be sure to check the other page dunk made, http://sites.google.com/site/mrdunk/interfacing-cypress-cyrf6936-to-avr-microcontrollers

    I’m the other guy in the rcgroups thread who’s working on the arduino library, which is nearly finished. IMO, it’s a good alternative to xbee modules because of the price, although the xbee does have some nice extra features to it. The only annoying part is the 2×6 2mm pitch header on the modules, but I’m hoping to get a small arduino board designed for it eventually.

  10. draeath says:

    @nebulous

    It should be obvious he’s already using an arduino. That’s the email username he gave us after all.

    Either that, or a REALLY odd coincidence.

  11. Sammy says:

    I would love to see the plane fly !

  12. egf says:

    you can see more progress and videos at society of robots.

  13. egf says:

    wowee!

  14. strider_mt2k says:

    Yeah, a successful flight would be awesome.

    It looks ready.

  15. mars says:

    Definitely get an arduino
    – Cost-effective
    – Lots of resources for assistance
    – Based on/is java

  16. Jeff says:

    Pick up a copy of Tom Igoe’s Making Things Talk it covers a lot of what you’re interested in.

  17. dunk says:

    to those people wanting to see it fly,
    just go the website. there is a little footage there.

    http://sites.google.com/site/mrdunk/Home

  18. strider_mt2k says:

    Thanks for the heads up on the vid!

    Congrats!
    -and the landing? -beautiful!

  19. herbalsfromceylon says:

    hi nice blog, keep it up

  20. Tam says:

    WELL if your want to learn more about the real Hacking Technique visit us at phimhongkong.com

  21. damn, I just sold my PS2 last year. That is crazy. It looks to me all you have to do is get the coding down on the controller. Seems pretty simple programming. Unless I am wrong about this.

  22. rf receivers says:

    Thanks for the information! I personally really appreciate your article. This is a great website. I will make sure that I stop back again!.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 97,759 other followers