We’ve had a lot of requests in the comments for more Arduino centered posts so we were happy when [Njay] told us about his EDuino board. This is a minimal Arduino clone that has a crystal and its capacitors, a pull-up resistor and button on the reset pin, and a detachable serial programming connection. He also has a breadboard-friendly version seen above with all the interface pins on one side of the board. This is certainly a useful project and we’re glad to see the board files available for download. This does get us thinking… is this an Arduino, or is it an AVR ATmega168 breakoutboard that happens to use the Arduino boot loader and programming language?

We received quite a bit of tips, after posting about the 150$ high altitude balloon project, from communities and teams who had done similar tasks. There is more to these projects than simply filling a balloon and attaching a camera, so in order to allow everyone their 7 seconds of well deserved fame, we’ve compiled a quick list of similar high altitude balloons. Catch it after the break.
Read the rest of this entry »

[Chris] liked Cartesian RepRap idea so much that he decided to design his master’s diploma project around it. Though it uses most of the same parts as the RepRap (even the PCBs), [Chris] has adapted it so it does milling rather than 3D printing.  Most of the parts (such as the stepper motors) were harvested from old inkjet printers and typewriters. The thee-axis CNC machine can already etch and carve styrofoam at an impressively high resolution. To deal with all of the debris that comes with milling, a vacuum attachment (shown attached) was created. [Chris] is considering adapting it so it can work with wood and aluminum as well. Best of all, it uses standard G-code files, just like the RepRap. A publication by [Chris] on the project is also available through his website. No plans to release a kit have been announced yet, but we’ll wait and see. If any commenter knows of an open source CNC milling machine available as a kit, feel free to post a link to it below.

[Andrew Curtis] does fantastic timelapse photography. He found that he wanted to be able to move the camera while taking the shots to give motion to the final product. While this isn’t exactly a new idea, not too many people mess with it. The dolly to do it with can be quite expensive as it has to support the camera and move it in an automated and controlled fashion. [Andrew] has been working on building his own dolly and has documented the process.

[via Flickr]

Google has acquired reCAPTCHA and plans to use the system for digitizing books. Wait… what? CAPTCHA is the method of requiring a user to type in a visually obscured word to prove they are human. How can this digitize books? The answer is a bit obscure and takes some time to discover, but you’ll have fun along the way. Read the rest of this entry »

[Costis] managed to dump a copy of the boot ROM for the Nintendo Super Game Boy. This small piece of code (256 bytes) writes a graphic to the display at boot time as it loads the ROM on the game cartridge. He was able to dump the code by finding the exact point at which the device locks down the boot ROM. Just as that point approached he overclocked the device causing it operate so fast it couldn’t write the lockout bits into the register. Once past that single point of security, he executes a code that writes the boot rom out to a different address that he is able to read from. He’s got a copy of the dump along with the explanation up for your enjoyment.

[Thanks Anthony]

Since the adoption of Kernel 2.6, Linux has used the udev system to handle devices such as USB connected peripherals. If you want to change the behavior when you plug something into a USB port, this section is for you. As an example, we will use a USB thumb drive but these methods should translate to any device handled by udev. As a goal for this exercise we decided to create a symlink and execute a script when a specific thumb drive was loaded. The operating system we used for this exercise is Ubuntu 9.04 Jaunty Jackalope. Read the rest of this entry »

[Viacheslav] built a keypad that uses human capacitance to detect key presses. Unlike normal keys which close a physical connection, his project detects touch through the PCB substrate. He uses the analog comparator of an AVR ATmega8 to detect the moment of zero crossing and then measures the time it takes to discharge in order to detect key presses.

Read the rest of this entry »