That’s not a smoke detector, it’s an RFID detecting puck. [Eric] and [Brent] have been working on this concept to produce a virtual knob. When the device detects an RFID tag it vibrates, then the puck can be turned like a virtual knob, an accelerometer picking up the motion data. The build is rounded out with a XBee module for connectivity and housed in a printed case.
The video after the break shows the device controlling colored lights. There is a different tag for each color and when the reader is over one of them the puck can be rotated to turn brightness up or down. We foresee a lot of great uses for this. Turn it into a thermostat for public places by adding a character display to the mix. A tag can be affixed to a wall, when you want to change the thermostat setting just hold the puck over the tag and turn until the screen displays the desired temperature.
[Andy] has provided us with his new guide to hacking the OnStar GPS. Previously, we have covered a way to grab the GPS data from an unused OnStar system, however in recent years GM has added much more complex systems, which make it harder than swapping out a serial line. For the new version, [Andy] has figured out GM’s Controller Area Network (CAN), which they call GMLAN. He has also done most of the software snooping and sleuthing, and has mostly solved GMLAN’s method of announcing GPS data. There is sample code available to convert this information into generic latitude and longitude.
Unfortunately for the project, (and very fortunately for [Andy]), he has a child on the way and new job responsibilities, so he is offering up his results to the HaD community to finish up, double check, and provide a good how-to for everyone else. To anyone who decides to pick up this project and run with it, let us know!
[MetroMPG], an environmentally friendly car enthusiast from Ontario, added a tail to his car to increase gas mileage. This 1998 Pontiac Firefly is a sibling of the cheap and popular Geo Metro. He had already done some work to cover a portion of the rear wheel wells to reduce drag. Using cardboard, duct tape, and an aluminum frame he extended the rear of the car by around six feet.
The results are pretty impressive. His extensive testing can be seen in the video after the break and reveals a Miles Per Gallon increase of 15.1% at 90 km/h to get to 64 MPG. The tail is removable but we’re thinking it’s a pain to keep relocating the tail lights from the original body to the removable one.
Now we’re wondering if someone is doing this to our Smurf-blue Metro that we sold to the junk man for $100 back in 2001. It ran great, if you weren’t caught in the cloud of blue smoke coming out the back.
[mrpackethead], created this monster of a tree. As shown in the video, it’s capable of showing animations, patterns, and potentially video. The 6m tall creation is studded with 2000 waterproof RGB LED modules. Software for the tree was written in Apple’s own Quartz Composer and integrated into Madrix, a piece of software designed with the purpose of controlling LEDs. The 600W system is 100% Arduino-free and costs less than the equivalent of 0.04USD per hour to run in New Zealand.
[Geoist] opted for the Arduino way to rig up his own smaller RGB Christmas tree. Finding a slightly kitschy fiber-optic model in his local department store, [Geoist] was eager to harness its colour-changing powers. Upon opening it up, it was discovered that it was controlled by nothing more than a light bulb and a spinning disk of coloured light filters. [Geoist] gutted the setup in favour of a breadboard with 3 RGB lights hooked up to an Arduino. The sketch for it is available on his site.
Nope, we’re not adding Christmas songs to the game, but instead making the game part of the decor. [kumbaric] hung strings of lights on his garage door in the shape of this familiar gaming interface. The best thing is, you can actually play the game based on these lights. [Thanks Yuppicide]
Smallest… Snowman… Ever.
You can make one of these if you have an electron microscope and an ion beam on hand. This is the product of some clever folks at the National Physical Laboratory near London. This is a pretty fat snowman, 1/5 of a human hair across. By the way, you should have read the subtitle with the voice of Comic Book Guy (like we do when reading the tolls’ comments). [Thanks Matthias]
A little help please
[Andy] outdid himself with this creative decoration. Hanging a dummy from the gutter and placing a tipped over ladder beside it had some folks alarmed. The police asked him to remove the prop after they almost ran off the road while driving by. This was real enough that somebody actually came to the rescue, climbing to the top of the ladder before discovering the ruse. [Thanks Rob]
Lights that blow your mind
This video is from a 2007 display and features over 45,000 lights running on 176 channels. Individually controlled colors, fading effects, and music synchronization put on a show that will get you kicked out of your gated community. Admittedly this guy runs a business dealing in Christmas lighting displays, but that doesn’t diminish the sheer awesome of what he’s done. [Thanks Patrick]
Have a safe and happy Christmas. We’ll keep our fingers crossed that you get that new Weller you’ve been hoping for.
[Lucas] is at it again this year. Not satisfied by the computerized systems available on the market, [Lucas] decided to build on last year’s project. To save a bit of cash, he built the setup around Parallax’s low-cost SX28 proto board. The system is capable of controlling 102 channels, with 8-bit dimming. 6 boards control 7 channels each and are communicated to through a serial protocol (reducing the whole setup to only 36 feet of wiring).
More importantly, he’s teamed up with 3 other neighbors who also share a passion for outdoor Christmas lighting and they’ve put together the Christmas Tour of Lights. Money raised from all donations goes directly to the St. Jude Children’s Reasearch Hospital in Memphis, Tennessee.
Ding-dong, the DRM is gone. But not in the way we really want. The copy protection scheme that is used for most Kindle books has been cracked. We’d much prefer it hadn’t been there in the first place but then there’d be no challenge for security hackers.
Giving credit for the advancement gets a little messy. Apparently two folks figured this out at approximately the same time. [Labba] posted about his discoveries while [I (heart) Cabbages] wrote about his exploits in a blog entry. Either way, you can now strip the protection and use your legally-purchased books on any device you choose by using this Python script.
This means that both Kindle and Nook have had their DRM broken. Are these companies really trying to prevent copying (fair use) or do they just want to be able to tell the publishers that there are copy protections while turning a blind eye to what happens in the privacy of your personal computer?
[Jeff] and his team completed this iPhone controlled rocket launcher as part of their final project at Georgia Tech. Two servos provide the rotation referenced by an onboard electronic compass, and elevation control for launch. These are interfaced with an eBox 2300 using a few Phidgets boards.
Check out the launch video below. It’s too bad that they went with a commercial solution for servo control rather than building it themselves (especially considering it is an embedded systems class). But it is a nice build none the less. Now they need to add some imaging equipment to the rockets and they’ll be in business.
[Jeff] and his team completed this 
