Superprobe

The Superprobe is a logic analyzer, multimeter, and much more rolled into a fun to build project. [Ben Ryves] didn’t come up with the original idea, but he definitely took a good thing and made it better. You can use it to test logic, inject logic into a circuit, read capacitors and resistors, test frequency, read the device address from 1-wire devices, and more. Interchangeable probes, choice of internal or external power, simple two-button operation, and a powerful PIC microcontroller at the heart of it all make this a fantastic tool for your electronics workbench. Check out the quality video after the break that  [Ben] put together to show off the results of his tinkering.

Comments

  1. Spork says:

    Wow, added to my To-Do list. This sounds like a very useful tool.
    I’d opt for a less blinding display, but otherwise I love it, great work!

  2. Neolith100 says:

    Having found this guy before in the past makes me think I should start submitting finds to hackaday. But if I have learned anything from this guy, it’s that if you want to sound really competent and intelligent… talk with a “real” english accent “old skool” and such.

  3. zeropointmodule says:

    nice :)
    Now, how about fitting one into something screwdriver sized? that would be useful for on-the-fly testing of parts and free up some bench space.
    Add an accelerometer such as the FC-30 to rotate the display depending on the angle and this would increase the useability of the superprobe.

    I tried to make something like this based on the LM3914 built into a live test screwdriver from one of those Woolworths toolkits but couldn’t find a small enough battery.

    in retrospect a micro would have saved space,and maybe use an ORB cell in place of a battery with a short duty cycle..

    for those who are into small displays, a good source is those “digital picture frames” and then figure out the protocol using a Logic and program your micro accordingly.

  4. octel says:

    I wonder if one could use an AVR/PIC to emulate an even more advanced probe like this one:

    http://www.peakelec.co.uk/acatalog/jz_dca55.html

  5. Dan Fruzzetti says:

    I want to know the overall build cost (including scrapped mistakes) in currency and time units.

  6. IsotopeJ says:

    @octel, I wanted the same exact device and ended up getting this kit instead – http://www.m3electronix.com/sa.html

  7. zerth says:

    @Dan

    ~$5 PIC, ~$3 display, the rest of the bits cost maybe $10, unless you buy them individually from rat shack. <$10 for the case and board.

    Worst likely price:$30 * # of times you set it on fire. Plus shipping/taxes.

    Going by the pile of parts I happen to have on hand: maybe $20 including shipping for the PIC, display, and nicer regulator.

  8. directive0 says:

    That video was extremely well made, and informative. My compliments to Ben!

  9. Comrade says:

    Very handy!
    I was very impressed with the video as it demonstrated several of the functions and was explained very well.

    I’m interested in building one now. Contrary to what some some people would want, I’d build it into a slightly heavier case for benchtop use, I have a slight tremor in my hands so I’d mostly be using clips for probes anyways.

  10. mess_maker says:

    That is an awesome project!

  11. Ben Ryves says:

    Thank you for the feature and for all the kind comments! Most of the credit should go to the Mondo Technology website; the “Hall of Fame” page there shows a number of versions of the project in a variety of different enclosures.

    I know blue LEDs are not especially popular here, but that display turned out to be the cheapest 4-digit module on eBay at the time.

    It’s also comforting to know that when my technical knowledge runs out I can always fall back on my “nature documentary” diction. :-)

    Thank you zerth for estimating the price; I’m never very good at that as most of my projects use components I already have knocking around. I’m even worse at estimating time – I spent a Saturday afternoon cutting holes in the enclosure and soldered the electronics together on the Sunday afternoon, but I probably work slowly in comparison to most people (it’s a hobby, so I don’t feel the need to rush)!

  12. aw says:

    Is there anywhere I can buy something like that or an inexpensive pre-programmed kit?

    The one linked above is a bit too expensive and I just want something like that preferably from the US?

  13. George Johnson says:

    It’s be nice to interface a LCD display or some of those HDSP’s….

  14. ino says:

    very nice video.

  15. Steve says:

    At first I thought is was a mere toy, but the array of functions in combination with the form factor: grrrrreat! Only problem I would see is accuracy.

  16. octel says:

    @IsotopeJ

    thanks for this!

  17. uu says:

    nice voice

  18. Dan says:

    Very nice, well made and documented in BBC style ;-) I like how perfectionistic he is-he even eliminated the background from the superprobe pictures.
    Check out Ben’s Journal, he has quite a few interesting electronics projects up there!

  19. polossatik says:

    Very nicely done Ben, kudo’s for the excellent video.
    I’ve watched this after the last eevblog.com episode , the difference in “style” could not be bigger :)

  20. pelrun says:

    I love my superprobe, it’s such an awesome tool. It doesn’t get used all the time, but when it does, it’s invaluable.

    Small piece of advice though – if you can’t find a 4 digit display, *don’t* be ‘clever’ and wire up four single-digit displays instead. It’s a royal pain in the arse! Look harder for the 4-digit display.

  21. HIlo says:

    He doesn’t have an accent – thats just how English sounds when it is spoken properly!

    Seriously well done, great work and decent video.

  22. Einomies says:

    If you’re keen on working with plastics, use ABS. It’s tough, resilient and can be seamlessly glued by dissolving flakes in acetone.

    I tend to not care about the scratches I make, because I use sandpaper to smooth the surfaces and corners anyways, and then apply spray paint on top to alter the texture and surface between matte and gloss. You can use the dissolved goop as filler if necessary and then sand it down. I treat the plastic a bit more like wood actually.

    There also exists drillbits for making accurate and round holes with optional countersinking, called step drill bits.

  23. Ben Ryves says:

    The accuracy is admittedly not great when measuring components, Steve (especially the resistor mode due to the non-linear relationship between the sampled resistance and the value read from the ADC input). It certainly won’t replace my multimeter for taking more trustworthy readings, but I feel it makes up for these deficiencies by its convenience!

    Thank you for the tips, Einomies. I think most of the project boxes I’ve seen for sale are ABS, so I should be safe there. I hadn’t thought of sanding and repainting afterwards, and the filler sounds useful. I’ll have to look out for those step bits too!

    Thanks all for the comments! :-)

  24. Einomies says:

    Just remember that the dissolved ABS shriks as it dries, so apply some extra. The thicker you make it, the less shrinkage but the harder it is to make it stick. You can also glue the stuff by brushing it with acetone and then joining the pieces, but that results in a weaker seam.

    You can also use the dissolved plastic to cast items.

  25. Einomies says:

    I find it immeasurably more useful to just buy half a square meter of 2-4 mm ABS sheet and then cut up suitable slivers from it. Custom project boxes are quite trivial to make.

    Here’s one of my early attempts at working with the stuff: http://koti.mbnet.fi/jeti/loota/

    I was trying to design a computer case with minimum material requirements and hand tools. Just aluminium L-profile and plastic/alu sheets. Turned out slightly rough around the edges, but it was a proof of concept anyways.

  26. glagnar says:

    There is similar project (with many more features) called the engineer’s assistant. It uses an LCD instead of a number display and also does logic analysis, rs232 analysis, frequency counting, and a whole bunch of other stuff.

    http://ww1.microchip.com/downloads/en/AppNotes/00689a.pdf

  27. Dan Fruzzetti says:

    @zerth: Thanks so much for the information! It looks like an absolute must-have, so I might embark upon its creation soon (if I can create the free time).

  28. TheK says:

    Another version of superprobe with more video: http://www.hotsolder.com/2010/05/superprobe.html

  29. Larry Miller says:

    geez, how did all these other comments get on here!

  30. Rohit Varma says:

    how to deveop it using AVR

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 94,010 other followers