Dishwasher notifier for the absent-minded

dish_o_tron_6000

[Quinn] over at BlondiHacks is admittedly pretty absent-minded when it comes to household chores such as emptying the dishwasher. She often can’t remember if the dishes are dirty or ready to be put away, so she decided it was time to devise a mechanism that would help keep her on task. She originally considered a double-sided sign that said “Clean” on one side, “Dirty” on the other, but she chose the fun option and decided to over-engineer the problem instead.

She ultimately focused on two conditions that she needed to monitor: when the dishwasher had been run, and when the dishes have been emptied. To tackle the first condition, she used a thermistor to detect when the door of the dishwasher got hot from the wash cycle. The second wasn’t quite as easy, since she often peeks into the dishwasher to grab a clean dish when needed, unloading the rest later. She eventually settled on using a tilt switch to monitor the angle of the door, assuming that the dishes have been removed if the door was open for over a minute.

[Quinn] reports that her Dish-o-Tron 6000 works well, and she had a good time building it. Sure the whole thing is kind of overkill, but where’s the fun in moderation?

Comments

  1. scumdog says:

    It doesn’t wirelessly tweet status, or use any micros? I’d say it’s not quite enough overkill yet.

    I like this one though. Clean design and build, for something that could easily be done with a magnet or other indicator.

  2. Taylor Alexander says:

    THIS IS A COMPLETE WASTE OF TIME.

    I love it. ;)
    -Taylor

  3. Ken says:

    Idea stolen, will implement this weekend – thanks.

  4. macw says:

    I know that hacks don’t need to have a purpose, but — are you serious? You don’t need to “remember” if the dishes are clean, you just look at them. It takes about 3 seconds. And as for knowing when the cycle is done — is the dishwasher making noise? If yes the cycle isn’t done yet.

    I just fail to see how anyone, anywhere could actually consider “figuring out if the dishes are clean and if the dishwasher is still running” to be a big enough problem that it needed a complicated electronic solution…which is mounted on the door anyway so you have to be in front of the dishwasher to interact with it in the first place!

    This is such an incredible waste that it feels like some sort of april fool’s joke or overblown trolling attempt.

  5. macw: “A hack is never obsolete or useless” – and now repeat that for about 100 times.
    You’ll get why it’s worth having!

  6. Anonymous says:

    @macw: Welcome to Hackaday.

  7. TrollAWay says:

    macw, I only see one troll here.

    *looks up at macw’s comment and rolls eyes*

  8. andar_b says:

    @macw

    There are thousands of people out there, if not many more, who for reasons unknown, simply don’t remember to empty the dishwasher when it needs it. Still more who pre-wash the dishes well enough to make it difficult to tell if they’ve been run yet. I know there are lots of things that are more traumatic than finding crud in the bottom of your coffee cup when you’ve already finished the coffee, but it’s annoying.

    I applaud [Quinn] and wonder why this feature isn’t built in! Many microwaves beep until you actually get up and grab your food, thus preventing you from forgetting to eat it, a variant of this idea would be great at getting me to empty the dishwasher.

    Incidentally, I hate emptying the dishwasher worse than cleaning the litterbox and doing laundry combined. I don’t know why.

  9. hpux735 says:

    Given how ridiculously unnecessary this hack is, I think I can safely say that BY FAR my favorite part is that the old palm case, painted white, looks just like a dishwasher! THAT is art! Far more than some dumb spray-paint printer bicycle or something. It’s a microcosm of the greater dishwasher whole. or some crap. :)

  10. andar_b says:

    Another problem I just remembered. If you make a habit of taking clean dishes out of the dishwasher but leaving some of them in there, sometimes someone will put dirty dishes in amongst them.

  11. Olivier says:

    WTF, I see two 555, while Quinn could have just use a single arduino. What’s wrong with her.

    jk, cool device, that I won’t replicate for now as I don’t have a dishwasher.

  12. Trav says:

    Sweet….I love how the case even looks like an old style dishwasher…

  13. charliex says:

    hey quinn !! :)

  14. Philippe says:

    Funny. My dishwasher has an indicator that almost does that. I found it very smart.

    When the cycle is complete (it has its own set of indicators so I know it is running), this indicator comes on and doesn’t come off until you lock the door again.

    So basically, make sure you don’t lock the door again until you have completely emptied the clean dishwasher (the door doesn’t need to be locked to stay closed.)

    Once it’s completely empty, lock the door.

    Light on? Dishes clean.
    Light off? Dishes dirty.

    I think it’s much simpler to implement, but as (pretty much) everybody here, I love an over-engineered hack. Thank you Quinn! ;-)

  15. Ratty says:

    I like that she thinks two 555s is over-complicated, when someone less experienced could easily use two arduinos to do so much less.

    A daft question, but does anyone know what kind of blue LED that is? It’s brightness looks comparable to regular red and amber ones, rather than the ridiculous super-bright blues in everything at the moment. I want to snag a few.

  16. Squirrel says:

    I’d’ve called it the Dish-o-tron 1110

  17. Calis says:

    Awesome. When I was a kid, all we had was a magnet that you flipped over to designate dirty or clean.

  18. anti-fanboi says:
  19. Bill says:

    0. With most dishwashers, you can see if there’s soap in it, e.g. because the soap-holder lid is closed or there’s powder or gooky liquid soap around it.

    1. If there’s soap in it, it’s dirty, and you may put dirty dishes in if they fit. If it’s full, maybe run it.

    2. If there isn’t soap in it, it’s clean, and you may take clean dishes out, but may not put dirty dishes in.

    3. If there isn’t soap, and it’s empty, you can put soap in it and GOTO 1.

  20. gcat122 says:

    @macw & bill
    I see what you are saying. It just does not fit our situation.
    I have 4 people that randomly remove dishes.
    2 that prewash but do not rinse the soap off.
    3 that do not remember to check the dispenser for status.
    Zero that are awake when it runs.
    No lock to show status.
    A status light (CLEAN) that turns off at the first touch of the door.

  21. gcat122 says:

    Continued:
    Zero persons that want to empty the clean items.
    No ferrous surface to slap a magnet on.
    And a computer control that forgets if it wasrunning or finished!

    I love the case.
    Time to build on with a touch screen and rinse water analyzer.

    Nice build!

  22. James says:

    Our dishwasher tells you when it’s done on teh front, and when you open it to empty it you turn the power off. Right? :D

  23. Rich Bailey says:

    A feature like this may seem useless but I see it as just another step in a larger picture. I imagine a central house computer wired to every outlet in the house with a small extra data port for appliances. Then appliances can register with the house computer and feed it back information like the current state of the dishes or if your stove is on.

  24. walt says:

    loooove the name

  25. dan fruzzetti says:

    I submitted a very similar idea as a feature to Kenmore, who as expected ignored my suggestion.

  26. Quinn Dunki says:

    Gosh, who’d have thought a silly thing I built for fun would create such controversy.

    Anyways, thanks for all the warm fuzzy thoughts everyone!

    I didn’t realize this was posted here until just now.

  27. Quinn Dunki says:

    Hey everyone! Some additional follow-up…

    Regarding the blue LED, it actually is a ton brighter than the red one. I’ve got a 5k load on it, and it’s still twice as bright. I call that a feature, though. It draws your attention to the fact that work needs to be done in the area.

    Someone mentioned that it’s no better than a sign because you still have to interact with it. Actually, the whole idea is it’s completely automated and requires no internal knowledge of the machine or effort from the user. You just slap it on the door and forget about it. The problem with a sign (for me) is that you have to remember to flip it. There’s still room for absentminded error there. I wanted something that took me out of the loop completely. :)

    Also, if anyone is seriously going to build it, I’ve made some changes which I haven’t had a chance to document yet. I removed the transistor labelled “timer enable”, and switched to TTL 555s (circuit is designed for CMOS). I also put an 820pF cap in the signal line from the lower 555’s output to the upper 555’s reset. Those changes all combined fixed some glitches it was having. Occasionally it would miss a state change, or would spontaneously lose the Clean state. It seems much more solid now. I haven’t seen a bug since these changes went in. I’ll be revising the schematic and posting a “rev B” design on my website.

  28. Quinn Dunki says:

    Also, hi charlie! :D

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 92,278 other followers