chipKIT Max32, an Arduino Mega upgrade with a PIC32 under the hood

For those of you who are looking to put some power behind your Arduino shields,  Digilent just released their chipKIT Max32 prototyping platform. The board  features a Pic 32 microcontroller, USB programmer and all the things you would typically expect from a development board.

The PIC32MX795F512 is a  32-bit MIPS processor core running at 80Mhz, 512KB flash memory and packs 128KB of SRAM data memory. Digilent also mentions utilizing the Pic’s built in USB 2 controller, 10/100 Ethernet and dual CAN controllers, but these will require shields specific to the chipKIT Max32. The board is also fully compatible with Arduino IDE and libraries as well as MPLAB  and the PICKit3 in-system programmer/debugger.

With a price point just below the Arduino Mega 2560 this looks like a great resource for anyone looking to upgrade their Arduino webserver, or just embarrass their Arduino Arduino shield. Maybe it’ll just spawn some interesting gameduino upgrades. It can certainly cut down on extraneous Arduino usage. Either way we’ll be on the lookout to see what this performance bump can bring to table!


  1. Spork says:

    Love me some 32bit micros.

    You kinda glossed over the fact that it’s compatible with Arduino IDE as does the website you link to.

    When you say compatible with arduino IDE, do you also mean the arduino libraries?

  2. fred says:


    “The board is also fully compatible with Arduino IDE and libraries”

  3. I cant believe I’m designing a similar board -.-

  4. Scott says:

    WOW.. this is pretty sweet.

    I kept hoping that the “Netduino” boards would actually become Arduino-compatible (instead of confusingly implying so).

    Basically, this is all I really wanted… more powerful hardware in the super friendly Arduino package.

    This looks powerful enough to masquerade other hardware… say, providing a SD card bridge for a Commodore 64 or Atari ST. Or maybe you can do Ethernet right off of the pins (no extra hardware necessary?).

    Tie this in with the Google accessory API… wow!

  5. Adrian says:

    Only negative I have to say about this is that I hate that the non-standard pin header distances are becoming “standardized”. Other than that, awesome.

  6. poslathian says:

    dual CAN bus is nice. Has anyone played with one of these? I wonder how “fully compatible” this really is the Arduino IDE and libraries. Seems like a lot of work to port everything to pic32 no? It was certainly a ton of work to port everything over to cortex m3 for the leaflabs Maple board.

  7. poslathian says:

    also, I wonder what licensing is in play here, digilent is usually pretty bad about closed source windows only tools.

  8. BiOzZ says:

    i was never a fan of pics … i always loved AVRs and ARMs XD

  9. Taylor Cox says:

    One of my EE professors at Washington State University is the owner of Digilent. I am only a five minute drive away in Pullman WA…hope to get an internship there this next summer.

  10. Marks says:

    Please please somebody do this for the analog devices Blackfin. 400Mhz DSP – then we can do some computer vision with these boards too

  11. Taylor Cox says:

    My EE professor at Washington State University is the owner and founder of Digilent :) Only five minute drive for me to the main building…hope to get an internship their this next summer.

  12. ftorama says:

    Well….I’ll play with a Maple from Leaflabs instead….

  13. Reid says:

    Awesome! I work literally just around the corner from Digilent. I had no idea that they made non-FPGA dev boards there…very neat!

  14. hpux735 says:

    Awesome. I’m more excited about this because if microchip can support a arduino clone, that means that the pic development tool chain can support it. This is a win. Hopefully they mean support the arduino IDE means on all platforms (linux/mac)

  15. Spork says:


    guess I missed that, thanks.

    That is really cool. I am more of an ARM fan for 32bit, but this will be nice for arduino project upgrades. Glad to see this kind of progression as the norm shifts to 32bit.

  16. Sodor says:


    Me too HA!

  17. Taylor Cox says:

    you too what?

  18. I have one on the way courtesy of Microchip. Should be here in the next few days. I did not think the official launch was until next Wed.

  19. cgmark says:

    Some of the other features not mentioned are the Real time clock calendar so no need for external time keeping, hardware IrDA support so it can communicate with laptops and printers using IR.

    I can’t see it happily coexisting with the arduino IDE though if someone wants to use the full power of the chip. There are just too many functions that this chip has that the ardunio doesn’t . I would definitely look at using C on it from hitech or others . To use it like another arduino would be like only playing DVD on a bluray player, yeah it plays them and it looks good but you are missing out on some of the best things about the hardware.

  20. WestfW says:

    “The board is also fully compatible with Arduino IDE and libraries”

    I didn’t see any evidence that this is actually true. I mean, theoretically PIC32 is supported by gcc so it’s not out of the question, but I didn’t see any downloads, I don’t know of any support by the Arduino IDE for alternate compilers, and a lot of people have discovered that porting libraries isn’t as simple as it would seem (even between AVR families) once you consider the rather large base of rather poorly documented libraries that exist.

    It still looks like a pretty sweet board for the price, though. It could certainly give some of the ARM contenders a run for their money.

    Did you see there is also a “small” version:,892,893&Prod=CHIPKIT-UNO32

  21. MattQ says:

    I might be in the minority, but I kind of like PICs. PIC32 bundles in a ton of communication tools, so I hope to see some sweet ethernet/usb projects. Real question, why is the alternate text perfectforLEDflashing? Isn’t that a little over kill?

  22. WestfW says:

    Nice EAGLE schematic. I like the way that they split up the PIC32. Also interesting that it still has an FTDI for the USB/Serial converter, considering that microchip offers a competing chip. I guess this is essentially a “leak” and full details will come out closer to the “ship” date of 21-May ?

  23. Will says:

    I’ll have a review sample in my hand within a week, will post details on TBCS!

  24. pt says:

    “The board is also fully compatible with Arduino IDE and libraries”

    @westfW is correct, our first question was “is it actually fully compatible with Arduino IDE and libraries”. i think the answer is not yet.

  25. Brennan says:

    PIC32 is very powerful indeed. FYI the Keurig coffee makers use them, although I doubt they even use a fraction of the processing power for that application.

  26. Daid says:

    Shame that the ethernet is not on the main board. That would make it a real killer.
    But with the very high priced Arduino Mega2560, this was bound to happen. I rather had seen an AVR32, or an ARM. But it works :)

    They also have a smaller PIC32 on a slightly different form factor:,719,896&Prod=CHIPKIT-UNO32
    But it’s much better priced (26$)

  27. makomk says:

    Last time I checked the PIC32 compiler and toolchain was Windows-only. Even though the compiler is just a slightly modified version of the open source GCC MIPS compiler, Microchip’s licensing conditions on the PIC32 libraries and headers forbid you from recompiling the compiler – including recompiling it to run on another OS.

  28. makomk says:

    So thanks, but I think I’ll pass. The licensing on AVR tools is just so much nicer.

  29. X says:

    Do ppl not read the summary? IF this can be coded using the Arduino IDE and Processing language, then what does it matter if some /other/ IDE is Windows only or has bas licensing terms?

    It might just be that Arduino IDE is now the CPU agnostic development chain it was always intended to someday become…

  30. JimParker says:

    @makomk I don’t think that will be an issue now that Microchip’s new and soon to be released MPLAB X IDE will be cross-platform.

  31. cgimark says:

    Nothing wrong with liking pic, I like them as well. Arduino is popular because it is easy for beginners to understand, though pic isn’t hard either. PICs really have a lot going for them in the hardware area and price points. You can get pics like the 18F13K22 that run at 64Mhz and have 18 I/O, for $2.00 each. I think the programming aspect is what scares people away. But microchip sells the pickit 3 programmer on their site for $34.95 and that works with all pics.
    There is also a ton of software that people can use for free like swordfish basic if they want to start with something arduino like.

  32. specv002 says:

    The PIC32 7 series is the buggiest mCU i have ever worked with. I just graduated college as an EE, my senior project was a robot driven by the PIC 32. I found that it had bugs that were unexplainable. For instance i used the SPI peripheral to comm with a gyro, and a PWM to drive an H bridge circuit, sometimes the SPI would turn the PWM off. So it was a guess which peripheral would work. I dont know if it was the PIC 32 starter kit or the chip but too many bugs, I read the errata cover to cover and found nothing. None of my teachers could explain it either.

  33. Taylor Cox says:

    @Reid. Do you live over in Pullman?? Do you know Clint Cole?

  34. DJ JD says:

    @ftorama – I’ll play with this UNO clone if it’s $20 cheaper than Leaflabs… And much more powerful than the Arduino version.

    Ditto on comments about PIC toolchains – this isn’t even Microchip’s board, it’s Digilent’s. TBD on how well they make it work in the Arduino IDE but if they pull it off, that’s fricken sweet. Seems like those of us who don’t get early samples will find out May 21st…

  35. makomk says:

    X: Arduino is very much not CPU agnostic. The standard Arduino release compiles code to AVR binaries; whatever the chipKIT Max32 webpage might claim those aren’t going to run on a PIC32. Now, it’s possible in theory to modify it to compile code for a different platform – but that means supplying your own C compiler and libraries, and the ones for PIC32 are Windows only and have onerous licensing conditions.

    JimParker: ah, that’s somewhat better. Presumably it still has the lovely copy protection that disables compiler optimisations (most or all of which were actually developed by GCC contributors) after a “trial” period, ties your license to a particular machine, etc though.

  36. addidis says:


    I dont think the pickit will fit onto that 25$ board while either the usb or power cable is attached.

    You can actually use mplabx now. The links are easy.
    you could also try
    etc etc

    If you havent looked into Microchip , you probably should .

  37. addidis says:

    I guess if you dont use 90 o headers it would work on second thought. There appears to be a coffee shortage today.

  38. ftorama says:


    The PIC18F13K22 runs at 64MHz but each instruction needs 4 instruction cycles to excute, so it really runs at 16 MHz. Adding the poor assembler, you’ll see that an ATmega is much more powerful than this

  39. WestfW says:

    @makomk: “Microchip’s licensing conditions on the PIC32 libraries and headers forbid you from recompiling the compiler – including recompiling it to run on another OS.”
    Reference? I hadn’t heard that part before. The “missing optimization” when using the gcc-based compilers (pic24, pic32) is some sort of microchip-added global optimization, not the basic optimizations that the HiTech compiler has been dissed for not doing on pic16/pic18. I think.

  40. makomk says:

    WestfW: all -O2 and higher optimisations, apparently, unless they’ve changed it. (For those not familiar with GCC, those are all standard generic GCC optimisations as far as I can tell.)

  41. makomk says:

    Hmmmm. Looks like it might only be the GCC-based Microchip C18 and C30 compilers that have the really nasty anti-open source restrictions, but no-one’s dared test this yet.

    It’s far from clear Microchip are in a position to restrict their use – they didn’t even write the standard libraries for PIC32, instead appearing to have used the MIPS ones – but that might not stop them.

  42. cgimark says:


    You need to look at page 280 of the data sheet. Almost all are 1 instruction cycle except compares which naturally take 2 or 3 cycles depending on the result. Hardware multiplies are 1 cycle as well. Add to that I2c that runs at 16Mbps and it is a hard chip to beat for $2

  43. Well, I’m also using PIC32 in one of my classes, we are more than 260 students using them an no one as yet found an hardware bug, my professors are also using it in the MSL team, and in a lot of other classes.

    You can donwload MPLabX that runs under Linux, Windows and Mac, the same for the compilers.

    Yes the compiler as some limitations in the free/lite/student version, but you dont gain a lot using the super agressive optimizations because almost all the libs where re-written in hand-crafted assembler, so the compiler cant optimized them much more, and if you really want and you are using for personnal and non commercial use, just download the source and compile it, you are free to do it.

  44. Dave Jones says:

    This product release was under an embargo until May 23rd – OOPS.
    Guess i can mention it now on The AmpHour now the cat is out of the bag?

  45. WestfW says:

    The digilentinc web page has been updated to say:

    “Program using a modified version of the Arduino IDE, available as a free download for PC, Mac OS, and Linux. (Coming 5/21)”

    I’m a whole lot more comfortable with that statement. Three cheers to Digilent for clarifying the situation!

    > this isn’t even Microchip’s board, it’s Digilent’s.

    I think that (one of?) Digilents target markets is to design and “manufacture” evaluation boards for semiconductor manufacturers. I have a Xilinx “starter kit” in a fancy box that says “Xilinx” all over it, purchased directly from Xilinx at a trade show, that has “DigilentInc” on the actual PCB. It sounds like a fun business; always getting to play with the newest toys… I wouldn’t be surprised if this ends up being Microchip’s next PIC32 eval board.

  46. WestfW says:

    “(Coming 5/21)”
    Hmm. For Maker Faire? I see Microchip is a vendor this year. oughta be a lot more interesting than a multi-hundred-dollar “sunspot.” I’ll SO be buying one if there’s a Faire Discount (and there are any left…)

  47. ftorama says:


    Look at the product page: 16MIPS for 64MHz

    1 instruction cycle needs 4 clock cycles. All PICs below PIC24 work like this

    PIC24 and some DsPIC (need to verify for them) work at half the clock speed.

    On PIC18, the PLL is here to compensate the core’s low speed.

    Only PIC32 seem to work at their actual clock speed

  48. therian says:

    dont forget that 4 cycles give stability and ability to wake up exactly each time

  49. Why is there a FTDI on it period? That entire family has built in USB-OTG. A waste of UART if it’s connected to that instead.

  50. am_i_evil says:

    @Roman Dulgarov
    Do you know for a fact that the FTDI is completely redundant, and there is absolutely -no- advantage to it?

    It may just be that the FTDI enables greater power savings (as little dedicated chips sometimes do vs. processors). Or maybe it’s another technical advantage (freeing up the processor to do more things or have more pins available). Or maybe it was done simply to facilitate a rush to market, by copying as much of the Arduino as possible.

    I would wait for a hands-on review before forming any opinion of it being “wasteful”..

    (Also, it seems wrong to look at any Arduino through the lens of “wasteful”. It’s a very general purpose board with a lot of stuff added on to make it easily approachable. Relax. :-)

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


Get every new post delivered to your Inbox.

Join 96,725 other followers