Last chance to enter The Hackaday Prize.

Embedded Linux meets Arduino with the Rascal Micro

Behold the Rascal Micro. It’s running embedded Linux and has a dual-row of pin headers which probably seem pretty familiar. The idea here is to bring Arduino hardware (ie: shields) to a party with a powerful web server.

The image above is the beta version of the hardware. What’s being shown off in a recent Engadget demo is a version that slides two USB ports in between the barrel jack and the NIC. This makes it easy to jump over to wireless with the use of a USB dongle, or you can figure out what other peripherals you want to include in your project.

The novelty here is that the web server included a built-in editor. So not only can it serve you a webpage to control hardware or display sensor status, but it will let you edit the interface without needing to reflash anything.

The price rings in somewhere around $100-150, and like the popular Raspberry Pi board, you can’t get your hands on it right now.

Comments

  1. nikescar1 says:

    Wouldn’t this be easy to do with a Raspberry Pi and an Arduino Uno? It would be a lot cheaper too. Still a cool device though.

  2. macona says:

    Any idea how long it takes to boot?

  3. StripeyType says:

    Another win for Artisan’s Asylum in Somerville, MA!
    Congrats to Brandon on putting this out.

  4. Jack says:

    how do you compare this with Raspberry or cheap netbook from China cost almost the same price?

  5. gigavolt says:

    Raspberry Pi available now???? Everytime I check, none is in stock. I just did a quick check on ebay, and one has 27 bids with 33 minutes left. The current offer? $135

    • Nitch says:

      I dont know what you mean, i ordered my R-Pi from Element 14, when it was first announced, and it just arrived. Why are you stalking Ebay for one, when you can order one from Element 14 and get it in a month’s time, even less now they’ve stepped up production…

  6. tlalexander says:

    Wow, this looks way less useful and more expensive than an electric imp. Ethernet? How about wifi. And they even have an Arduino board for the imp.
    http://electricimp.com/developers/devkits.php

    I actually met with Hugo, the CEO of electric imp, at their headquarters today and talked to them about how the imp could be integrated into 3D printers. They’re super hobbyist-friendly and they have a wicked product. I played with one of their sensors hooked up to some RGB christmas lights, and the latency was amazing – everything routes through amazon’s servers and back, and there was seriously like 100ms latency. And then he told me the imp in the sensor was actually sleeping for 50ms at a time, so it could probably be less!

    Seriously, check this video out:
    http://www.engadget.com/2012/05/21/hands-on-with-the-electric-imp-at-maker-faire-video/

    • R says:

      Thanks for the link, that looks pretty intriguing.
      One question: does anyone know what kind of clock frequency the processor runs at? It’s kind of sad that the Hackaday article doesn’t link to any specs on the Rascal, and I couldn’t find any on the Imp site either – all it says is it’s a Cortex-M3.

      • Chris C. says:

        If there are full specs, they’re well hidden.

        The only thing I could find before giving up is that it contains a AT91SAM9G20, which can potentially run at 400mhz.

        But I get the impression that this is geared towards people who don’t care about specs, price, or programming.

  7. a sandwhich says:

    What ever happened to the beaglebone?

    • chango says:

      You can still buy them, there’s still a sizable community behind it, and they’re still pretty awesome. Though I think it would gain more popularity if TI would subsidize the price down by $20 and advertise more.

  8. Kris Lee says:

    This is quite cool hardware and the size is also quite right (5×10 cm).

    I’m wondering if it would be possible to make this even smaller and have screw terminals instead of Ethernet connector and PoE support.

    Then it would be easy to use it inside electrical outlets.

  9. furan79 says:

    I’ve never clicked through so many pages without being able to read the hardware specs of something.

  10. furan79 says:

    For anyone digging through the fluff, this is an Atmel AT91SAM9G20 400 MHz w/64mb ram.

  11. bunedoggle says:

    I keep hoping that something like this will come along and knock Arduino off the hill.

    Problem is $150+ dollars is just a little too much. If I can buy an Intel Atom based motherboard for $69 that will run any flavor of linux I want.

    I know this has I/O and is low power and bla bla. But the bottom line is, if I’m doing a one-off project then price and ease of use are the only factors.

    We need tiny linux boards for $39-$59.

  12. Thomas Polasek says:

    Have a look at the Olinuxino. It uses a comparable ARM chip except at ~500Mhz and 64MB ram but its only $35 with shipping on ebay.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 91,220 other followers