Typing comfortably on a Smart Phone is best done using an external keyboard, especially if you spend a lot of time on IRC or use other chat apps. Obviously, the keyboard needs to be portable too. [cy384] felt the current crop of portable keyboards left a lot to be desired in terms of build quality and feel. That’s when the Palm Portable Keyboard (PPK) caught his eye. It’s small enough to fold up and fit in a pocket, yet unfolds to a size big enough to feel comfortable while typing. Unfortunately, the version he preferred to use did not have either a Bluetooth or a USB interface, so he built up this Palm keyboard adapter.
The portable keyboards have a serial interface and custom connectors depending on the Palm model they were designed to connect to. [cy384]’s goal was to adapt the PPK as a generic USB HID keyboard using an Arduino Pro Mini clone, with a 3D printed adapter for both of the keyboard types that he had. The keyboards use inverted TTL logic at 9600 baud with no parity and one stop bit. Some handshaking needs to be taken care of and there’s a low power mode that needs to be managed via the Arduino code. He was lucky to get his hands on a reference document that provided the hardware and software details to help him crack all of this. His Github repository has the code and 3D printable files for the adapters.
Nice trick. I still have an old PocketPC version (Palm’s competing PDA) and it connects via IR and swiveling mirror to manage IR’s line from the keyboard’s emitter to PDA’s IR receiver. I’m also guessing it’s a basic one way serial type connection. I need to find it and see if I can make it work with my cell phone, its tiny keyboard is hard for Andre the Giant-sized hands.
i-have-one-willing-to-swap-for-anything
IIRC last year a company was selling this same folding keyboard in a bluetooth version.
I’ve got one. It misses keystrokes and double types keys so often it’s worthless.
Thanks for the “heads up!” on that.
Got more lucky than you, bought one of the original by ThinkOutside themselves (the manufacturers of the original Palm one), that one still works reliably after years of abuse.
The one shown here is a Targus, unless they rebadged Think Outside’s. I still have the one I got for my Visor.
nice hack, and very nice build log. that arduino running at 16MHz doing bit banged serial is quite the powerhog though, there’s a lot of room for improvement, since this is a battery operated device..
The company who made the PPK, Think Outside, did make a bluetooth version of this exact keyboard.
And I got lucky to buy one while there were still made (even got the limited “luxury” edition with shiny silver metal, and with the leater holder).
It eats batteries rather fast to my taste, but unlike the cheap no-name asian clones mentionned above by Ash, its bluetooth connection is more reliable (as long as the AAA battery is charged).
Saddly, over time (and having successingly served a Tapwave Zodiac 2, a Palm TX, a Palm Pre*, an HP Pre3*, and now finally a Jolla – so its been (ab)used quite a lot), it’s starting to break down. The battery cover is compley broken, and the screw supposed to hold the whole battery compartement gave away.
I was thinking on my own that a converter could be doable, thanks to cy384 for his wonderful work!
Man, I miss my old Palm Pilot (actually a Handspring running Palm OS) and all its accessories. People forget how much of today’s iPhones, iPads, and Androids owe to those wonderful little gadgets.
Oh, what happened to it?
nice hack, but somewhat out of date, nowadays $5 buts you foldable usb tablet keyboard with free shipping from china
Did you read the part about the Build Quality?
The current bunch of foldable keyboards are mostly crap, as people don’t want to pay for quality.
At least, that’s the perception at most companies.
Thank you for this hack… Made it this evening and it works GREAT. The instructions were so clear it couldn’t have been easier. Thank you!!
Call me stubborn, but I’ve got too much love for my Nokia E7 with Delight firmware.
Just can’t seem to find a worthy upgrade.
Those PPKs are awesome… full size keyboard with good key press feedback and which folded up into solid little case which could fit in a pocket. Great hack!
Has anyone made a run of this little adapter, perhaps a couple hundred copies? This would sell well if you search online for how many people want to reuse their old Palm Stowaway keyboard. The was the best portable keyboard I have eve used.
The magic in question is just code running on an Arduino that can ast as a USB HID. Code’s up on Github, either have the connectors 3D printed yourself, or do a bit of splicing if you have to, put a more reasonable connector on yourself. Then use the leftover bit of cable to make an adaptor to connect back to a Palm again if you need to.
Maybe if you want the hassle of selling them, Mr Cy will let you do it yourself. Running a business is a much bigger pain than a bit of soldering and whatnot, I can understand why people don’t want to sell their stuff as products, however much we beg. People will beg for one for themselves, but if it turns out sub-perfect they’ll complain halfway across the Internet. Or sometimes complain for reasons that are the person’s own fault, or expecting more than the laws of physics or economics can support.
Even without dude’s skills, you might be able to hack up an ugly version of this to use yourself.
Do you have any ideas about the original board schematics? I didn’t find anything in google and don’t think I’m ready to reverse-engineer it. =(
Check that out it might help. http://wb9kzy.com/palm.htm
I belive this has data sheets and other PDF’s on the different palm keyboards you were looking for. It was burried deep in a few other sites off this post. http://wb9kzy.com/palm.htm
I am not tech savvy as the other posters are- is there a place to buy the adapter you have built? Will it then work with any device that has a matching connection port? Thanks for you help!
Did you ever get a reply for this comment? I am the same, I read and read but I don’t know where to start, I have a brand new, never used Palm, portable keyboard P10713U and would love to be able to use it.
were can i buy a adapter for it
I have an Palm Portable keyboard I need a cable to connect it
Like Edwin,
I should appreciate an offer for making this USB-interface ?
Anool, would you like to make an adapter for me?
Regards
i-have-one-im-willing-to-swap-for-a-soldiering-iron
Hi there, i have a similar Palm Keyboard (Thinkoutside model, but with palm print) bought from ebay. I have a wireless model with infrared, but my palm Vx and my palm Tungsten C need a driver (a single prc file). I have searched hours and hours to find a working driver, with the result to get at least some symbols and input signals working on the Vx. But it seems to be the wrong character table, the driver is from a competitor.
Does anyone here have a driver for the palm wireless IR model ? I just need a file uploaded to google drive or similar cloud drives. I hope anyone can help,
Thanks in advance,
Michael
I have an unopened palm portable keyboard v series . Let me know if interested.
Anyone know the name of a manufacturer who can supply the same foldable keyboard with Bluetooth that can be used with current android smartphone?
Hello, Very good job, I did the assembly, I had a keyboard stored for the Palm3, and I added new macro functions with the “keyboard.h” library, can you help me with a question about the source code?
For those who couldn’t build by themselves: I’ve made a few extra for the Palm III version, and listed them on ebay. You can try searching for “USB adapter for Palm Portable Keyboard” on ebay.
The price I’m charging is just to cover the BOM and fees, not trying to profit from it, just want to help those who don’t have the skills to build it. Thank you cy384 for this wonderful project!
Hi Eraldo. I have the silver metal folding Palm keyboard. Will you be making any more adapters? Iphone lightning to Palm keyboard. Regards, Ted
I don’t build this adapter anymore, but there is a bluetooth version you can buy now. Check it out https://www.tindie.com/products/26595/