Measuring Capacitors At The Birth Of Rock And Roll

The late 1950s [Bill Haley], [Elvis Presley], and [Little Richard] were building a new kind of music. Meanwhile, electronic hobbyists were building their own gear from Heathkit. A lot of that gear shows you how far we’ve come in less than a century. [Jeff Tranter’s] YouTube channel is a great way to look at a lot of old Heathkit gear, including this really interesting “direct reading capacity meter.” You can see the video, below.

Measuring capacitance these days is easy. Many digital multimeters have that function. However, those didn’t exist in the 1950s–at least, not in the way we know them. The CM-1 weighed 5 pounds, had several tubes, and cost what would equate to $250 in today’s prices. Unlike other instruments of the day, though, the capacitance was read directly off a large analog meter (hence, the name). You didn’t have to interpret readings using a nomograph or move a knob to balance a bridge and read the knob’s position.

[Jeff] doesn’t just look at the CM-1, he explains how it measures capacitance by rectifying a pulse generated by the capacitor. The average value is proportional to the capacitor’s value, and [Jeff] shows you on the scope what’s going on inside. You can pick up a lot of good information, especially if you are interested in old gear. For example, do you know what a chicken head knob is? If you don’t, definitely watch the video!

If you have any interest in vintage gear, [Jeff’s] entire channel is worth a look. He also does a lot of retrocomputing projects and documents them in great detail. If you aren’t old enough to remember Heathkit in its glory days, it is hard to grasp the scope of it. They made everything including TVs, ham radio gear, robots, computers, terminals, and–of course–test equipment. All in kit form with meticulously detailed manuals that no one else has ever quite recreated. Take a look at some of [Jeff’s] videos and you’ll see what we mean.

3 thoughts on “Measuring Capacitors At The Birth Of Rock And Roll

  1. Great video Jeff!
    Hand-me-down tube Heathkit gear is what really sparked my interest in electronics. The manuals did a very good job at describing the operation of what were usually pretty basic and easy to understand circuits.
    The 50’s/60’s era Tektronix manuals are in an entirely different class, but worth a gander for anyone interested in vacuum tube electronics. The 545 manual (my first scope) probably taught me more about the craft than any one other book.

    1. I worked in a place and most of the techs had 545’s on the old scope carts. The year we really started phasing out the 545’s for solid state scopes the entire building got much nicer in the summertime. Without row after row of those space heaters running the big AC in the building could reach it’s setpoint on hot days.

Leave a Reply to reggyCancel reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.