Exoskeleton Aims To Prevent Falls For Seniors

When we think of exoskeletons, we tend to think along comic book lines: mechanical suits bestowing superhero strength upon the villain. But perhaps more practical uses for exoskeletons exists: restoring the ability to walk, for instance, or as in the case of these exoskeleton shorts, preventing hip fractures by detecting and correcting falls before they happen.

Falls and the debilitating injuries that can result are a cruel fact of life for the elderly, and anything that can potentially mitigate them could be a huge boon to public health. Falls often boil down to loss of balance from slipping, whether it be a loose rug, a patch of ice, or even the proverbial banana peel. The “Active Pelvic Orthosis” developed by [Vito Monaco] and colleagues seeks to sense slips and correct them by applying the correct torque to the hip joints. Looking a little bulky in their prototype form and still tethered to an external computer, the shorts have motors with harmonic drives and angle sensors for each hip, plus accelerometers to detect the kinematic signature of a slip. The researchers discovered that forcing the leg that slipped forward while driving the stable leg back helped reduce the possibility of a fall. The video below shows the shorts in action preventing falls on a slip-inducing treadmill.

At the Hackaday Unconference in Pasadena, we heard from [Raul Ocampo] on his idea for autonomous robots to catch falling seniors. Perhaps wearing the robot will end up being a better idea.

Continue reading “Exoskeleton Aims To Prevent Falls For Seniors”

A Few Of Our Favorite Chips: 4051 Analog Mux

Raindrops on roses, and whiskers on kittens? They’re alright, I suppose. But when it comes down to it, I’d probably rather have a bunch of 4051, 4052, and 4053 analog multiplexers on the component shelf. Why? Because the ability to switch analog signals around, routing them at will, under control of a microcontroller is tremendously powerful.

Whether you want to read a capacitive-sensing keyboard or just switch among audio signals, nothing beats a mux! Read on and see if you agree.

Continue reading “A Few Of Our Favorite Chips: 4051 Analog Mux”

Monoprice Releases Their Mini Delta Printer (On Indiegogo)

Around this time last year, Monoprice quietly unveiled a small, $200 3D printer. At the time, a fully functioning printer at this price point wasn’t unheard of. A good 3D printer at this price point was. It turned out this printer was actually fantastic and completely changed the value proposition of desktop 3D printers.

In the year since the release of the MP Select Mini printer, Monoprice has been hard at work bringing costs down, reworking designs, and creating an even less expensive printer. Now, it’s out. It’s available for pre-order on Indiegogo right now. Is this still a $150 printer? Not quite: the ‘early bird’ price is $159 with free shipping and August delivery, and a regular price of $169 plus $10 shipping with September or October delivery. There’s also a bundle for $279 that includes the printer, 2kg of filament, and a software package.

The first time we saw this tiny printer was way back in January at CES. It looked to be an extremely capable printer; the only question was if Monoprice could produce it and get it out the door. This would be a tall order; this printer comes with NEMA 17 stepper motors, a heated bed, a 32-bit controller board, and has WiFi enabled.

Here’s what we know about the capabilities of this printer. It’s a fairly standard delta printer with Bowden extruder and a heated bed. PLA and ABS is supported. The printer has auto bed leveling that measures the bed by ‘tapping’ the nozzle against the bed in about a dozen places before printing. From what we saw at CES, the hot end appears similar to the first revision of the $200 MP Select Mini — possibly opening up the door to E3D hot end installations.

Is this printer worth it? Every 3D printer released on a crowdfunding platform should come with the standard warnings, but Monoprice says this machine is in production right now. This raises the question: why release it on Indiegogo when Monoprice already has the whole ‘taking orders for products online’ thing in the bag? I suspect this crowdfunding campaign is just building a buffer; a year ago, the MP Select Mini was perpetually out of stock, and demand far outstripped supply. The same thing will happen with a 3D printer that’s even deeper into impulse buy territory.

In any event, the printer we’ve all been waiting for has been ‘released’, for varying values of ‘released’. The first units will start making their way onto desktops this summer, and we’re going to pick one up and put it through its paces. You can check out Monoprice’s video of this printer below.

Continue reading “Monoprice Releases Their Mini Delta Printer (On Indiegogo)”

Arduino (and Camera) Take Amazing Pictures

There’s an old joke where you ask someone what’s the most important thing about comedy. When they get to about the word “important,” you interrupt them and say, “Timing!” Perhaps the same thing can be said for photography. [Ted Kinsman’s] students at the Rochester Institute of Technology would probably agree. They built an Arduino-based rig to do inexpensive stop action photography.

As Arduino projects go, it isn’t very sophisticated. The circuit contains a  sound detection module and an optoisolator. The code would easily fit on a piece of notebook paper. When a loud sound occurs, the Arduino triggers the flash. Simple enough, but the resulting pictures are amazing. It also looks like a lot of fun to destroy perfectly good things in the name of art.

Continue reading “Arduino (and Camera) Take Amazing Pictures”