[Mike] was going to be biking across Canada. He really wanted to document the trip, so he began planning ways to get still images taken at intervals along the way. After a bit of brainstorming, he ended up setting his goals a bit higher. He was going to film the entire trip. He really didn’t want a simple helmet cam, he wanted himself and the entire bike in the frame. To do this he had to build a long arm on which he mounted a bullet cam. On his handlebars, he has a simple control where he can turn the system on and off as well as initiate recording.

No single piece of this project was too complicated, but taken all together, the final result is quite nice. You can watch the video for yourself after the break.

Read the rest of this entry »

[eric] has found that he can build a pretty nice 2 axis joystick out of some VCR parts. Specifically, he’s using the idler wheel. When you disassemble the idler wheel, you’ll find that it has a bevelled washer in the perfect location to help with smooth joystick operation. Add a spring and a hole in some wood and you’ve got the basics. All you need to add now are the switches. This is a fantastic example of recycling parts, you never would have guessed that it was made from trash.

[Alex] sent us this project he’s working on where he’s building a phototransistor based multitouch input system. Though many people have built systems with phototransistors, most of them are quite large and very sensitive light and dark variances. [Alex] has done some fancy background subtraction through software. He believes his is the first to do this. As you can see in the video after the break, it seems impervious to the lamp he is moving around, and still fairly sensitive to his hand. We’re curious to see where he takes this one.

Read the rest of this entry »

Look at this awesome glove. This awesome glove is used to control tetris. Yes, you read that right, it controls tetris. This was a final project at Cornell in the summer of 2008. They built this glove to do gesture controlled tetris. With all the announcements of the PS3 motion device and Microsoft’s project Natal, it’s nice to look back to our very recent past and see some alternative user input. These people are using accellerometer data only, sent to the computer wirelessly.

[Matt] wrote in to tell us about this project. He plans on travelling with his MSI Wind and wanted better audio recording capabilities. He decided to install an additional microphone and a preamp. He made a custom preamp and wired it directly to the motherboard. The microphone was then mounted in the laptop screen. The second microphone is placed opposite of the first, about 18cm apart which [Matt] claims gives it a binaural effect. We think that this might just classify as stereo though. Wouldn’t you have to seperate them with a barrier or dampening device for binaural? It doesn’t really matter though, stereo mics are a great addition to the MSI Wind, and he did it very well. He does point out that it picks up a lot of noise though. There’s always room for improvement.

Like many pet owners, [Pete] was curious about his little furry friend’s habits while he was gone. He decided to build an RFID tracking system to monitor their positions. This data would then be available on the web.  An Arduino handles the communication of the data, both to twitter and his personal cat tracking site. We were a bit surprised to see that the only data transmitted on the final project was whether the cat was inside or out. We’d like to see a heat map of the cat’s activity in the house.

[John] sent us this nice little project. He shows us how to create a motion activated alarm that plays the Mario Brothers theme and flashes some lights. He’s using an ATTiny13a for the brains, and a cool mario mushroom candy tin for the body. You can see it in action after the break.

Read the rest of this entry »

[Florin] was given the task of repairing a GPS unit that wouldn’t boot up. What he found was unfortunately a bad processor. Fortunately, he was able to make a project out of it. After scavenging the good bits, the GPS module and the LCD, he set about making it a USB device. He now has an EEEpc with GPS.

Another Cornell final project, Weather Canvas aims to make watching the weather a little more pleasant. Data is captured via a thermometer, humidity sensor, anemometer, and a Hotwheels radar gun turned precipitation sensor. Once it’s captured, it’s transmitted to the LED matrix inside which displays pretty patterns to convey the weather conditions. They have set images, like icons, that mean different things.

[Pete] has put together a fairly simple writeup on building a wireless USB tether for your DSLR. He’s basically using a pair of USB wireless adapters and a battery pack. In his original version, he did some slight modification to the dock that powers the USB dongle, adding his own battery pack too. He notes that this whole project can be done without the effort he put into it, at a little more expense.  The only improvement we think would be nice would be a better way to package it to keep it out of the way while you shoot.

There have been several attempts at bringing Dungeons & Dragons up to date with modern technology. Most attempts have been in the form of computer games that somehow fail to capture the essential experience. This attempt, however seems to add some techie flair to while keeping the game the same. [Itay] has built some digital dice. Simply choose how many sides you want your dice to have, then give it a shake.  OK, a random number generator isn’t that groundbreaking, but he did have to do some pretty intense soldering. The LED matrix is pretty cool, but we like looking at the back. You can see it in the video after the break.

Read the rest of this entry »

[Marc] submitted this project he’s been building. It’s a web enabled HVAC monitoring system. He’s using a pic-web development board with a custom I/O daughter board to control the HVAC system.  The project allows for the system to be monitored and controlled via the web. It should be able to interface with most commercial and residential systems. As usual, schematics and source files are available on his site.

[NRP] sent us a few of his projects. The most notable of the bunch was a school project funded by Disney. They were to make some kind of interactive entertainment for people waiting in line for rides. They decided on a wand style interface. Each wand has an accelerometer, an IR LED for tracking, an XBee unit, and a few buttons for interaction. They wrote some custom games and a multi person white board to test it all out.  You can see those in action, along with a space themed pong game in the video after the break. Even though this was funded by Disney, you can still find all the source code and schematics, available for free.

Read the rest of this entry »

[moris_zen] found himself with a hand full of Li-Ion batteries and no good way to see what their capacities were. He built a this unique tester really quick to get the job done. He’s using off the shelf components and a cheap pocket watch which he bought in Taiwan for $1. You hook the circuit up to your battery, click the button and the watch starts working. When it stops, you multiply that number by .38 to get your amp/hour results. Sure, he could have just used a counter, but this is an interesting approach. All he needs to do now is make a nice container to hide all of the circuitry. How could he change the circuit to make the end multiplication unnecessary?