[Drug123] made the most out of this inconspicuous gray box on the gable end of his father’s home. It serves up a 3G Internet connection that was otherwise unavailable..

The project idea was sparked by the absence of wired or fiber optic broadband in the community where his dad lives. He knew some neighbors were using 3G connections, but he couldn’t get it to work inside the house. So he set about developing an external installation that would both communicate with the cellular network, and provide a WiFi connect to it. Hardware for that is relatively expensive; a USB 3G modem and a WiFi router with a USB port.

The box itself is made of plastic, but even without the Faraday cage effect that would have been formed by using a metal housing, the 3G modem’s internal antenna just doesn’t do the job. You can see that [Drug123's] solution was an external antenna which is mounted at the peak of the roofline. Inside the box there’s an exhaust fan to cool things off when they get too hot, as well as some power resistors which provide a heat source on the coldest nights. The low-cost build certainly fits the bill, and it’s not too hard on the eyes either.

It seems that the iPhone 2g and 3g are the newest phones to get Android 2.2, codenamed Froyo. The process for installing Froyo if you have a jailbroken device seems to get even easier every time, with this revision being as simple as adding a repository, downloading Froyo, and pressing go. Follow the link for a wonderful step by step guide, complete with screenshots to take out all of the guess work. Android on iPhone sure has come a long way since the first time we covered it.

[via reddit]

[bunnie] has taken a few moments to show us how to turn our Chumby One into a 3g router. As it turns out, there is an easter egg that allows it to communicate with certain models of 3g dongles. There’s no GUI for this trick, so you’ll be doing most of your configuration via SSH. That shouldn’t be a problem for this crowd though. The Chumby One just got a lot more appealing.

[Rob] sent in his Dell mini 9 3G install. He bought the Dell without the 3G option, but found that he really wanted it. He installed a mini pcie bracket and found a sim connector that matched the specs he needed. Apparently they use one that it rare as it uses the first pin to indicate whether or not there’s a card loaded. He pulled the mini pcie 3G card from a cheap USB adapter. After soldering it all in place and firing up OS X, he was able to connect, without issue. He says the reception wasn’t great, so he’ll need to add an antenna. This is similar to the process seen on the Acer aspire one 3G hack. Since you’re already in there, you might as well add a GPS while you’re at it.

Bug Labs, the company that makes modular electronics that allow you to build your own tech doohickeys quickly and easily, has announced five new modules: BUGprojector, a mini DLP projector developed in conjunction with Texas Instruments, which sounds very much like the tiny DLP projector we posted about last week; BUGsound, an audio processing module with four stereo input/output jacks, a microphone, a speaker, and builtin hardware codecs; BUGbee (802.15.4) and BUGwifi (802.11 and Bluetooth 2.0+EDR), which will let you connect wirelessly with your PAN and WLAN, respectively; and BUG3g GSM, for connecting to (you guessed it) 3G GSM networks. In conjunction with Bug Labs’ existing series of modules, especially the highly versatile BUGvonHippel universal module, you’ll be able to create some pretty kickass gadgets. No word yet on pricing, although Bug Labs expects to ship by the end of Q1 2009.

To appease people waiting for the iPhone 3G unlock, iphone-dev team member [MuscleNerd] did a live video demo this afternoon. The video shows him removing the AT&T SIM and putting in a T-Mobile SIM. After the switch, the phone shows no connectivity. He then runs “yellosn0w” in an SSH session with the phone. The phone then unlocks without needing to be rebooted and the signal bars appear. The final test shows the phone receiving a call.

The target for this release is New Year’s Eve and it doesn’t support the most recent baseband. Well be attending the 25C3 talk hosted by [MuscleNerd] and other team members. The VNC screen you see in the video is thanks to [saurik]‘s Veency.

iPhone dev team is at it again. They claim to have finally hacked the iPhone 3G. Originally codenamed “yellowsn0w”, it is targeted to be released on December 31st. This should free you from your locked in carrier as long as you have version 2.11.07 or earlier.

[via Engadget]

Working as quick as ever, the iphone-dev team have updated the PwnageTool and QuickPwn to work with the new iPhone 2.2 firmware update. The trouble with the new firmware is that it updates the baseband of the phone, which could potentially undo any progress made towards an iPhone 3G unlock in the future. If you don’t care about that, you can use QuickPwn to jailbreak your phone after the upgrade, so you can run any app you want. If a future unlock is important to you, use the PwnageTool to strip the baseband update out of the firmware update.

[photo: edans]

[tnkgrl] is back with part three of her Acer Aspire One hacking. This time she’s adding in 3G. You may look at the picture the above and think, “Cake. She just plugged the card in”. No, the Acer doesn’t ship with the mini-PCIe slot or the SIM card holder. First you have to solder a right angle mini-PCIe connector to the board pads and bridge two others to provide power. The SIM holder was another problem. She wasn’t able to find a pin compatible one. The one she installed is mounted to a riser so she could change the wiring order (let her know if you can find the correct part). This mod definitely requires some good soldering skills and she warns that even she managed to destroy a SIM in the process.

The Dell Mini 9 is another netbook that doesn’t have the appropriate connectors soldered on board, but JKK has a work-around. You need a 3G modem that has the SIM card on board. You plug it into the WiFi slot after taping over a few pins and then use a USB WiFi card instead.

Watch in wonder as forensics expert [Jonathan Zdziarski] takes you step by step through the process of bypassing the iPhone 3G’s passcode lock. Gasp in amazement as he creates a custom firmware bundle. [Jonathan], creator of NES.app a Nintendo emulator for the iPhone, is well respected for his work on opening the iPhone. In this presentation, he sheds some light on the forensics toolkit he helped develop for law enforcement agencies that we covered earlier.

Calling this an incremental update, they note that the changes seem to be additions and improvements rather than a total rebuild of the original platform. They get into the nitty gritty, discussing not only the layout and structure, but even the importance of each chip manufacturer.

Some of the improvements are obvious, like 3G. Others include the battery not being permanently attached, and the headphone jack being flush mounted. Most of the changes were in who manufactured each chip.

[via TUAW]

Not to be outshined, though, iFixit has posted a full iPhone 3G teardown, stripping away the sleek casing to feast on the goodness inside. They found some interesting changes from the last model: the glass screen, for example, is no longer glued to the LCD, which will no doubt make repairs less expensive. The battery is also unsoldered, meaning you won’t have to send the phone in for repair if the only battery needs maintenance.

A used 1st generation iPhone is actually a pretty attractive device. It’s already been laid wide open by hackers so you can run pretty much anything you want on it instead of waiting for the App Store to tell you what you can and can’t do. You could use it as a WiFi Voip phone, a simple web pad, run an NES emulator, use it as a musical instrument, or build an army of robots.

What will you do when the price of used iPhones bottoms out?