Once again, we’re wowed over [Zenta]‘s robotic skill. A few months ago, [Zenta] posted a video of his MorpHex hexapod spherebot that left us awed. After a few long months, more bits of MorpHex have made it onto the chassis. [Zenta] says his project isn’t done but it’s still enough to knock our socks off.

Going through the [Zenta] archives, there’s a little more to go on this time around. The MorpHex will be made up of two hemispheres, but only the bottom one will be able to walk. That’s really not that bad because [Zenta] gave the upper panels 1 degree of freedom. Just enough to scare off predators, we’re sure.

The chassis and the legs are amazing little pieces of engineering. Despite all the work [Zenta] has put into his MorpHex, there’s still work to be done. He hasn’t gotten the sphere to roll on command yet. We’ll be sure to post a video of the robot dancing to some lo-fi. Check that out after the jump.

You know we’re all going to starve, right? If the world’s population keeps growing exponentially and food production grows linearly, we’re eventually going to find out what Soylent Green is made of. This is where [David Dorhout]‘s Prospero robot farmer comes in. [David] has come up with the idea of using small autonomous robots to plant, tend and harvest fields. Right now, he’s working on stage 1: planting seeds.

A swarm of six-legged Prospero robots are dispatched to a field. There, each member of the swarm plants seeds one at a time. The robots keep in contact with each other over a wireless connection to ensure the optimal planting pattern for an entire field.

The Prospero prototype is based on the Parallax Propeller with a Ping ultrasonic sensor used to avoid obstacles. Each hexapod is equipped with a bunch of seeds, a small auger, and a supply of fertilizer for the future corn plant. The next step in the plan is to build a ‘tending’ robot that will monitor and apply nutrients if needed. Check out the Prospero video after the break.

Hexapod robots seem to be a dime a dozen lately, but we think you will be hard pressed to not be wowed by [Zenta’s] latest creation. He’s built a bunch of hex and octopods before, but hasn’t tried building anything quite like this.

His MorpHex bot might look like your standard hexapod, but once it gets moving, you can see that it’s quite unique. Utilizing over 25 servos driven by a single ARC-32 controller, MorpHex moves in smooth, fluid-like motions, making it almost seem like it’s alive. The inner portion of the body can fan out, extending the overall length of the bot, though it’s more meant to allow the bot to morph into a ball and back, rather than increase its size.

In the teaser video below, you can see MorpHex in action, with its parts flowing together more like a jellyfish than any sort of land animal. While [Zenta] is continuing to work on MorpHex’s sphere-morphing capabilities, we think it would make for an awesome and creepy spiderbot!

[Thanks, weaz]

Although hexapod robots have been featured on [HAD] many times, this one features a really cool minimalistic design. With few mechanical parts to support the three servos, the “Earthcore Hexapod Robot” has a unique gait, tending to quickly slide the driving legs rather than picking the whole robot up. Although it would probably have trouble on rough terrain, for use on a smooth floor or counter, this ‘bot is perfectly suited.  Check out the video of it after the break.

Another thing that really stands out on this bot is the blue LED “eyes” and it’s tubing “hat.”  The “hat” hides the wiring for the three servos, while most of the circuitry looks to be in between the eyes. The main controller is a PICAXE 18M2 micro-controller. 3 AAA batteries seen behind the tubing power the unit.

As for the name “Earthcore”, it’s based on a book by [Scott Sigler]. If there is a movie version in the works, we hope he calls [onefivefour] to help with the special effects!

For another small hexapod project, check out this one made from clear plastic!

For this week’s hack, [Dino] was working on a mechanical cat toy, but the project fell apart towards the end for some reason or another. With time running out, he had to come up with something on pretty short notice, using whatever he happened to have on hand. Luckily he picks up some seriously weird stuff at the local thrift store and had a disembodied doll’s head kicking around for this last minute project.

Taking a cue from Toy Story’s [Sid Phillips], [Dino’s] doll’s head hexapod is as creepy as it is simple. He had a remote controlled hexapod from RadioShack sitting around, and thought it would be fun to combine it with the doll’s head. He replaced the dolls eyes with a handful of LEDs, which are green as the hexapod retreats, but glow a bright red as it advances towards you. The only way it could be any creepier is if [Dino] added a voice box that plaintively called for “mommy” as the doll crawls around!

It’s a relatively goofy project, but it gave us a good chuckle. The most disturbing highlight of the build is when [Dino] removes the doll’s eyes using a wood drill bit around the 6:00 mark.

If you’re looking to kill a few minutes, be sure to check it out – [Dino’s] work is entertaining as always.

[Rob] built this hexapod one day when he had some free time after work. Just like the last hexapod we saw, he based the build on the Pololu design which uses three servo motors for surprisingly reliable movement.

The hardware is very straight forward. A Dorkboard serves as the brain. It’s a PCB that is wider on each side by the width of one female pin-header than a standard AVR 28-pin microcontroller. This gives easy access to all of the pins on the Arduino chip while making it small and light. You can see that a four-pack of batteries hangs below the servo motors to provide power.

Protruding above the 6-legger is a PING ultrasonic rangefinder. This adds autonomy to the little robot, which you can see running some obstacle avoidance routines in the video after the break. We’ve asked [Rob] if is able to share his code and will update this post if we hear back from him.

Update: Here’s a link to the sketch, and we’ve updated the picture with one that [Rob] sent to us.

Here’s a fantastic project that lets to drive a hexapod around the room using an RC controller. [YT2095] built the bot after replacing the servo motors on his robot arm during an upgrade. The three cheapies he had left over were just begging for a new project, and he says he got the first proof-of-concept module put together in about an hour. Of course what you see above has gone through much improvement since then.

The three motors are epoxied together, with the one in the middle mounted perpendicular to the motors on either side of it. Those two are responsible for the front and rear leg on each side, with the third motor actuating the two middle legs. It’s a design we’re already familiar with having seen the smaller Pololu version. You might want to check that one out as there’s some slow motion video that shows how this works.

[YT2095] added control circuitry that includes an RF receiver. This lets him drive the little bot around using a transmitter with four momentary push switches on it. We love the idea of using copper clad for the foot pads.

Google’s Maker Faire exhibit space is swarmed with robots…er, androids. Amidst some cool bipeds and Segway-balancers, our inner sci-fi nerd was most smitten with this hexapod design, which they’ve dubbed SKPR Bot. The “Skipper” is on hand to showcase the ease of various Google technologies: SketchUp, Android OS and the Android Open Accessory Development Kit. The whole project came together in less than six weeks.

18 servos are mounted to a framework designed in SketchUp and laser-cut by Ponoko. The low-level servo PWM control is handled by the Dev Kit (essentially a rebadged Arduino Mega, as we’ve seen), while an Android OS phone provides a slick GUI and handles all the inverse kinematics calculations required as the robot takes each step. The coolest bit is that it’s all up for grabs. At this moment you’ll have to scrounge around the ’net a bit to find the plans and code, but some time post-Faire they plan to bring everything together at the SKPR Bot site.

Here’s a small but functional hexapod that is controlled via Bluetooth. [Sigfpe] started with the hexapod kit sold by Polulu and added a BlueSMiRF modem to get the little guy’s communications up and running. But since the bot is merely three servos, a microcontroller board, sensors, and miscellaneous parts it’s an easy build for most electronic hobbyists.

Check out the video after the break to see the delightful dance it can perform at your bidding. When we first looked at the project we thought that the keyboard was directly paired with the bot for control, but a look at the code makes us think the computer is controlling it after processing keystrokes. Either way the BlueSMiRF should have no problem pairing with other Bluetooth devices so it’s just a matter of coding to get it taking commands from your device of choice. We’d love to see Android control but for the really hard-core code monkeys we think this should be voice controlled with a Bluetooth headset.

The latest robot out of Nolebotic is Al.I.S.E, or Aluminum, Infrared Scanning Entity. Don’t let the name fool you, its a pretty simple take on the classic hexapod walking platform using a crank arm and leavers made into the legs.

The body of the robot is made out of aluminum which is pretty easy to work with at home, lightweight, and sturdy. Bolted to the body are a pair of beefy gear head motors, a 9.6 volt rechargeable battery pack, along with a basic stamp 2 and its own 9 volt supply, and a Solarbotics 1198 CMD driver board.

Obstacles are handled right now with rudimentary infrared detectors and emitters, but it seems to work pretty good avoiding some library books in the demo. Combine that with clean mechanics and a pretty good stride and this thing can get up and move pretty quick.

[JC] built himself a hexapod based on a project he found on the Internet. It worked fairly well, but was mechanically weak and prone to breakage. He set out to improve the design and came up with the unit seen above. It uses three servo motors to control the six legs, and walks quite well as seen in the quick clip after the break. It’s not quite as agile as the little acrobatic six-legger we saw yesterday, but the movement is quite pleasing and it’s capable of moving forward, backward, and turning. [JC's] post is four pages in all so don’t forget to seek out his links for the construction, linkage, and servo control pages to find concept drawings, cad designs, and his thoughts on the process.

This LEGO hexapod uses just one motor for motion. In the video after the break you can see that what [Valetnin Bauer] accomplished is almost magical, using just 210 parts. A central drive shaft uses worm gears to transfer motion to each of the legs. The limb mounting technique results in a sort of rowing motion that closely mimics what you’d expect to see from a biological hexapod.

We thought this might provide some inspiration for the Buy Break Build: Santa-pede challenge. Sure, using LEGO is a lot easier than reusing Santa parts. But a lot can be accomplished with a little creativity. Another point of inspiration might be this one-motor walker that should be a snap to adapt to the challenge. Better get going, just twenty days let until the project deadline!

[via Tinkernology]

This video is a blatant example of having too many high-end toys but we love it anyway. [Robert Stephenson] is controlling a rather awesome-looking hexapod via a Bluetooth connection to his HTC Hero. The app allows on-screen selections to decide which portion of the robot will move as a result of accelerometer data from the handheld. The only thing we saw that was missing is a camera feed to the phone.

But this hack doesn’t stop there. The Hero can be used to host a WiFi network while still connected to the hexapod. The second half of the video shows an iPod Touch connecting via WiFi and controlling the bot. Now head on over to the laser cutter to start that hexapod build, and finish up by getting elbow-deep into some Android development.

Ah, the heady aroma of damp engineers! It’s raining in Silicon Valley, where the 2010 Embedded Systems Conference is getting off the ground at San Jose’s McEnery Convention Center.

ESC is primarily an industry event. In the past there’s been some lighter fare such as Parallax, Inc. representing the hobbyist market and giant robot giraffes walking the expo. With the economy now turned sour, the show floor lately is just a bit smaller and the focus more businesslike. Still, nestled between components intended to sell by the millions and oscilloscopes costing more than some cars, one can still find a few nifty technology products well within the budget of most Hack a Day readers, along with a few good classic hacks and tech demos…

(Is that a promise or a threat?)

First order of business was to follow up on a couple of products we’ve covered in the recent past…

We reviewed NXP’s mbed prototyping platform in November of last year. While there’s no stunning new revision, the good news is that the mbed community is going strong and economies of scale have made it possible to trim the starter kit price from $99 back down to the original early adopter cost of $59.

Additionally, they’ve thrown together a project in just a few days to demonstrate the prototyping ease of the mbed platform. Reading like a checklist of Hack a Day clichés, the demo brings together Twitter, the Logo programming language, live web streaming, servos and an Etch-a-Sketch. You can read more on the mbed blog, or watch the live stream and participate during ESC show hours.

We also liked this little breakout board which adds the most essential interfaces to mbed: MicroSD, Ethernet and USB host & client. This was something quickly made for an mbed workshop, and while there are no plans to officially productize it, we’re told the unpopulated board might be available through SparkFun’s BatchPCB service in the future.

Many readers were put off by the web-centric development approach used by mbed, as well as the lack of a debugger. Another NXP entry-level evaluation product called the LPCXpresso provides an affordable ARM development kit from a more traditional angle.

The $30 LPCXpresso boards are available in Cortex-M0 or -M3 varieties and include an integrated JTAG debugger. The downloadable Windows development environment is based around the Eclipse IDE and GNU toolchain. With headers installed the LPCXpresso is breadboard-friendly and in fact shares the same pinout as mbed, so there’s an existing ecosystem of hardware to work from.

STMicroelectronics’ STM8S-Discovery made a huge impact when we mentioned this $7 kit in November, clearing out distributors in a matter of days. At ESC, ST was showing their new ultra-low-power 8- and 32-bit MCUs with demos powered by a cactus (a variation on the classic lemon battery), a cup of warm water sitting atop a Peltier junction, and a modest induction charger. (What, no wind power?)

A new version on the STM8S-Discovery based on the new lower-power chip should be available within a couple of months, and is expected to be similarly affordable.

(Left: the original STM8S kit that created the ruckus. Right: the forthcoming STM8L kit.)

At the Texas Instruments booth, the BeagleBoard XM was being demonstrated, which improves upon its predecessor in nearly every regard.

We’re told BeagleBoard XM stands for “extra MIPS,” “extra memory,” (and “extra money,” they joked). The XM does not replace the original BeagleBoard, but will be sold alongside it at a premium price of $179 when it ships in June. The XM includes a faster processor (1 GHz), more RAM (512 MB, and a 1GB model may be forthcoming), Ethernet, more USB ports and improved power protection. The NAND flash is gone, replaced by a MicroSD slot on the underside. The new board is slightly larger but retains the same mounting holes, so it may fit as an upgrade into some existing BeagleBoard projects.

Microchip’s iPod/iPhone accessory development boards that we mentioned last month were on display. Unfortunately it appears one must be signed on with Apple’s “Made for iPod” developer program before these kits can even be ordered from Microchip, which really puts a damper on the fun for anyone who might just want to tinker.

Drifting further from product specifics and more into hacks and eye candy…

Product teardowns have become a staple of tech culture. “Zero-day” and live blog teardowns of new products are particularly exciting. ESC’s gone one better, making a show of ripping into a product (if a rather esoteric one) months before its official release: a high-end Zircon AC wire detector built around a Microchip dsPIC and a bevy of e-field sensors. It’s like engineer pr0n!

National Instruments certainly had one of the most entertaining booths at the event. Rather than passively showing dry PowerPoint summaries and monitors running LabVIEW (their graphical programming environment for engineers and scientists), they instead presented physical demos and projects making use of the software. Some serious, others not-so-serious. Hacks!

Remember Waterloo Labs’ iPhone-controlled car hack? There it is! Rather, there it is minus the actual car, but with all the essential parts nicely laid out where we can observe the rig in action. At the other end of the booth, one can challenge “RockBot” to a round of Frets on Fire, not unlike prior hacks we’ve seen.

Hack a Day readers might be familiar with Digi International for their XBee wireless modules, such as used in Adafruit’s Tweet-a-Watt power monitor. Easily distracted by shiny things, we were initially smitten with this addressable LED matrix wrapped around their booth; not a product, just something to catch peoples’ interest:

As it turns out, there’s an added bonus hack behind the hack. Most of Digi’s booth displays could be controlled and monitored using their own custom web apps, so it was a simple matter of walking around with an iPod touch to run the show:

At the ARM pavilion, this “Speedcuber” was solving Rubik’s cubes in under half a minute. The camera and puzzle-solving logic comes from a Motorola Droid. Commands are issued over Bluetooth to a pair of LEGO Mindstorms NXT controllers to drive the motors that manipulate the cube.

Macraigor Systems produces a line of JTAG debuggers…but to be honest, we (and pretty much everyone else passing the booth) nearly missed that fact, as we were all so distracted by their demo application involving one spectacular and elegant Intel hexapod robot:

We similarly fanboyed over Cryptography Research’s German Enigma cipher machine, as it was our first time seeing one not under lock and key in a glass museum case:

ESC Silicon Valley runs through Thursday, April 29th, and last we checked one could still register for a free exhibits-only pass on the ESC web site.

Apod walks!  If you recall, last year we discovered Apod, the creepy lifelike hexapod creation made by [Zenta]. At that point in time, it basically just shifted around nicely but didn’t do much walking. Well, [Zenta] has been hard at work since then and now Apod is fully active, walking, running, and serving drinks with smooth motion. Want to learn more about how his inverse kinematics work? Check out this thread.

[thanks Weaz]