Hack a Day » life

Reboot Life in a heartbeat

Mike Szczys — Thu, 18 Feb 2010 17:00:37 +0000

This hoodie senses your heartbeat and uses it to control Life. Conway’s Game of Life, popular in all kinds of electronics projects, uses a grid of cells coupled with a set of rules to mimic the life and death of simple organisms. This iteration displays the game over your own heart, then taps into your heart rate, resetting the game at the beginning of each cardiac cycle. We guess you could say that Life goes on only if you do not.

The EKG circuit that detects the heartbeat is made up of an IR transmitter shining through the tip of your finger to a receiver. An ATmega168 running the Arduino bootloader controls the EKG circuit and resets an ATmega48 which is responsible for Life. [Joe] admits that this is overkill but he’s currently without an AVR programmer; he went this route to make it work. The stylishly-geeky hoodie is taken for a test run (er… test-hop?) after the break.

Filed under: wearable hacks

Peggy-zilla

Caleb Kraft — Wed, 02 Sep 2009 14:21:53 +0000

For some, a peggy 2.0 is pretty cool, but simply not impressive enough. [MonsieurBon] felt this way and simply built a larger LED rig for his peggy2.0. It still uses the brains of the peggy, but the LED array is a custom built cabinet, using ping pong balls as diffusers. Another interesting modification is that they added a midi port to the setup to generate music based on what LEDs are lit. They say it creates some nice background generative music during the game of life. You can see a video of the system in action after the break.

It looks like they weren’t the only ones with this idea. The u:moon project is very similar, meant to be hung from a balloon. There seems to be an issue with the gallery on his page though, so you might want to go to his picasa gallery.

[via EMSL]

Posted in led hacks

LED Life and Charlieplexing

Eliot — Sat, 25 Oct 2008 00:04:30 +0000

Yesterday, we featured [Andrew]‘s orientation aware camera. We want to highlight another one of his projects: LED Life. It’s a 6×5 LED matrix playing Conway’s Game of Life. He used the low power MSP430 like our e-paper clock. The best part of the writeup is his explanation of how Charlieplexing works. Microcontroller GPIO pins generally have three possible states: output high, output low, and input. This combined with the directional nature LEDs and some creative wiring means you can run a large matrix of individually addressable LEDs with just a few IO pins. Instead of just flipping the IO pins on and off you change their assigned state. Have a look at [Andrew]‘s site for some great illustrations of how the system works. A video of his LED Life board is embedded below.

Posted in led hacks, misc hacks

SMD soldering practice kit

Eliot — Mon, 25 Aug 2008 06:59:00 +0000

Here’s an interesting kit put together just to help you work on your SMD soldering skills. It’s got 49 SMD LEDs on the front with a programming header and switch jumper. The back has an ATtiny26L and a coin cell. At only 3V, power management is essential; all of the example programs are only addressing one LED at a time (imperceptible to the human eye). If you turn on too many LEDs at the same time, the voltage drop could cause the AVR to reset. Included example programs are a scrolling marque, bouncing balls, and Conway’s game of life. SparkFun has tutorials for regular SMD soldering and using a reflow skillet. The video below shows the kit builder attaching just one LED using the heat and slide method.

[thanks tom]

Build a lifeform for io9

Juan Aguilar — Tue, 08 Jul 2008 01:20:00 +0000

Whether you consider yourself a bona fide mad scientist or you simply think your horrifying mutant creations are misunderstood, you’ll want to enter io9′s Build a Lifeform contest.

The contest doesn’t require any actual primordial soup, just a concept of a synthetic lifeform you think would be useful or interesting. There are two categories with different prizes for each one. The first category asks contestants to use the BioBricks registry of standard biological parts to design a lifeform that could be created in a lab. Descriptions of how it would be made, what it would do, and potential hazards in creating it must all be included with the entry. The winner of this category will recieve an all-expenses-paid trip to the Synthetic Biology Conference in Hong Kong in October.

The second category is more focused on creativity, asking for the same descriptions as the first category without any BioBricks data. While this is the more speculative category, proposed lifeforms must still be plausible to create using current technology. The prize is $1000 and a signed drawing of your lifeform rendered by “a cool comic book artist.”

Both categories offer pretty good loot for your concepts, just be sure they’re more original than an esquilax if you intend to win.

For the background on BioBricks, check out [Drew Endy]‘s Hacking DNA talk from last year. He’s one of the judges for the contest.

12 channel LiFe battery management system

Will O'Brien — Fri, 04 Jul 2008 14:50:00 +0000

With fuel prices rising, EVs are becoming more an more stylish. This bit of floor tile wrapped hardware is actually a 12 channel battery management system designed to handle Lithium Iron battery packs. It’s designed to take power from a standard lead acid charger and supply the batteries with their maximum charge current. The cost and complexity of the BMS has been a major stumbling block in the past, so it’s interesting to see these come around. If you need more than 12 cells, multiple boards can be used.