Encourage your kids to play with their food by making a cake that looks like a toy. The Nintendo DS lookalike houses some electronics to spruce up the presentation. The upper panel is cardboard covered in frosting to tie it in with the edible lower sections. That cardboard panel hides a couple of LEDs that blink thanks to a blinking Christmas light bulb in series with the diodes. There is also an LCD screen backlight in the form of to CCFL bulbs. The screen is just a still image but that’s okay, you can’t expect an actual video screen to be built into this. Take a look at the clip after the break to see the internals.

We’ve looked in on a few other cake hacks in the past. If you missed them before now’s your chance to revisit the gantry-based frosting dispenser and the turn-table frosting injector with silver-orb detailing. These are some sweet hacks!

All of the juicy details needed to control a camera from your Nintendo DS are now available at the Open Camera Control project. This is the descendant of [Steve Chapman's] setup from a few years ago. The system has been polished up and has seen many feature additions. It’s been used in movie production and works with a wide range of cameras.

Start by building your own interface cable using an AVR microcontroller running the Arduino bootloader. Finish up by loading some open source software onto the DS to add a cornucopia of shot options.

[Thanks Pops Macgruder]

We’ve received tips from a few different people about a new Bluetooth module that connects as a game cartridge for the Nintendo DS. This is a homebrew solution and not an official Nintendo add-on. The cartridge houses an ATmega168 microcontroller which provides the interface between the DS and a Roving Networks RN-41 bluetooth module.

They’ve provided a schematic for the device but we didn’t see any board artwork or pictures of the internals so you’re on your own for board layout. The libraries needed to use the bluetooth connection with homebrew software are up for download. This should provide a nice way to use the DS with a Bluetooth GPS module, or perhaps as a discrete Bluetooth sniffer and spoofer.

[palmertech] and [Bibin] have both completed backlight projects for the Game Boy Pocket recently. The most difficult part of the transplant is carefully removing the reflective backing on the LCD. After a thorough cleaning, a diffuser and backlight panel were added. [palmertech] used a backlight salvaged from a DS, while [Bibin] built his own using LEDs. You can see his backlight in the video embedded below. There’s a disassembly video too.

[via Engadget]

South Wales Police raided a store in Cardiff seizing 1,800 Nintendo DS flash carts. The devices can be used for playing pirated games or running homebrew software. In the UK, the carts are illegal under the Trademarks and Copyright Acts. The 21-year-old suspect had imported the devices and was selling them both online and in-store. He had over 1,000 devices in his home. Many of them packed and ready to ship. Official statements by the Entertainment and Leisure Publishers Association claim that the hardware irreparably damages the DS handhelds.

[via Joystiq]

We covered [Steve Chapman]‘s Nintendo DS control for his Canon DSLR in September. He’s since improved the software so that it has a timer for sunset/sunrise amongst other things. He also shot about 30GB worth of timelapse images while in Vancouver and assembled a couple test videos. He’s still working out the processing to take full advantage of the 15megapixel images. We look forward to future results since YouTube is now using a much larger player for high def content.

OpenSound Control protocol is an emerging standard for communication between musical programs. It’s meant to replace MIDI. The DSMI, DS Music Interface, team has just added support for OSC. You can now use your DS as generic OSC music controller over WiFi. OSC has TCP/IP support built in, so there is no need to run a host sever to talk to DSMI like you did when they only supported MIDI. We’ve seen OSC used in other projects like the monome. It’s also the basis for the multitouch communication protocol TUIO.

[via CDM]

A month ago, we reported that Nintendo’s new DSi portable didn’t work with any of the current crop of flash cartridges. Things didn’t look good for homebrew. Here we are a month later and looking at the release of the Acekard 2i. It’s the first DSi compatible flash cartridge. The features appear to be identical to previous versions and we expect other manufactures will be updating their product lines in short order. You can find a video of the Acekard 2i after the break.

These carts may exist because of pirates, but we happily use them for homebrew. There are a lot of great programs out there; here’s a list of 24 apps that are dedicated to music creation. You can run Linux on it too. It’s as easy as copying a file to a flash drive. If you have a DS and aren’t using homebrew, you’re wasting it. We’ll be picking up a DSi as soon as they’re in the US (they’re region locked).

[via DS Fanboy]

The latest version of the Nintendo DS, the DSi, has officially launched in Japan. It features larger dual touchscreens, dual cameras, and an SD card slot. The members of GBAtemp.net have decided to tackle the most important question: will it run homebrew? Current DS systems just need a purpose built flash cartridge to load homebrew software (usually stored on MicroSD). Forum members have tested at least 10 different flash carts, and none of them worked. While not completely exhaustive it’s proof enough to us that current generation carts will not work. We hope this is something that can patched with a new firmware. Most carts load their firmware off the flash, so upgrades are easy. The blocking of homebrew maybe a side-effect of Nintendo’s announced region-locking on the DSi.

We hope this gets sorted out soon. Maybe we’ll see hackers figure out how to take advantage of the SD slot instead. If you’ve got a Nintendo DS, there’s no excuse not to be playing with homebrew. It’s as easy as copying files to a card. We’ve had success with the DSTT, which you can find on DealExtreme for just $10.

[via Gizmodo]

Using a custom built cable connected to the lower GBA slot and a copy of Canon’s SDK, [Steve Chapman] has come up with a very clever way of taking pictures remotely with a Nintendo DS Lite.

Currently the software supports bracket shooting as well as bulb mode. [Steve] points out that he is currently testing an audio based trigger system using the mic built into the DS and the software is still a work in progress.

While the weight saving benefits of using a DS instead of a notebook are obvious, there are things you do give up going this route. Traditionally, when you tether a camera to a computer the photos are saved directly to the computer where you can view the image on a much larger monitor. With the DS, it seems all you can do is remotely trigger the camera. Given the size and resolution of the screens maybe that’s all it can do.

[via Boing Boing Gadgets]