[psymansays] needed a panning head for his robotics projects. Already being familiar with the NXP LPC2148 from work, so he wanted to use that to control it.  he built his own carousel out of old CDs. The axle of the carousel is a potentiometer. This is what he’s using to determine position. The gear motor was actually cobbled together with bits from a windup toy and an old motor. This may be a bit bulky, but it seems not only functional, but fairly versatile.

Bug Labs, the company that makes modular electronics that allow you to build your own tech doohickeys quickly and easily, has announced five new modules: BUGprojector, a mini DLP projector developed in conjunction with Texas Instruments, which sounds very much like the tiny DLP projector we posted about last week; BUGsound, an audio processing module with four stereo input/output jacks, a microphone, a speaker, and builtin hardware codecs; BUGbee (802.15.4) and BUGwifi (802.11 and Bluetooth 2.0+EDR), which will let you connect wirelessly with your PAN and WLAN, respectively; and BUG3g GSM, for connecting to (you guessed it) 3G GSM networks. In conjunction with Bug Labs’ existing series of modules, especially the highly versatile BUGvonHippel universal module, you’ll be able to create some pretty kickass gadgets. No word yet on pricing, although Bug Labs expects to ship by the end of Q1 2009.

When you need a rigid, vibration-free chassis for your amplifier, look no further than a roasting pan. I’ve used cast cement for subwoofers, but using a cooking pan bolted to a heavy wooden chopping board is a cheap way to get a rigid surface on which to build audio gear. The amp circuitry used by [Mark] is not complex, but it gets the job done. The “oxygen free copper cable” and “pure silver wire” are not needed, just make sure you have a solid mechanical connection. In other words, just tin your wires, bend small “u” shapes at each end, hook them together, and apply solder to the heated ends. Alternatively, hold the ends of stranded wires parallel to each other and twist the ends together before tinning, then solder. Test everything with a multimeter while moving wire joints to make sure you have no weak connections. Now you won’t waste your money on hyped-up cabling materials.

Thanks to [Gio] (who seems to have some personal audio projects as well) for the tip.