[Thomas Renck] recently picked up a 1000mW wireless video transmitter that he ultimately planned to mount in an RC plane. Before he strapped it on a plane to potentially kiss it goodbye for good, he wanted to play with it a while to see what it was capable of.

After a friend helped him determine the camera’s maximum range (about 1900 feet on open ground), he thought it would be fun to strap it on his nitro R/C truck. That didn’t work out so well due to some vibration issues, so he constructed a makeshift R/C car from the shipping box the camera arrived in, along with some other odds and ends.

As you can see in the video below, the propeller-driven “Boxmobile” zips along quite nicely. The video feed from the camera is pretty impressive too, allowing him to easily guide the car while it’s well out of sight.

At nearly $350, the self-proclaimed “ghetto-bot” is certainly not cheap, though we hear body repairs are a piece of cake!

[Dan] wrote in to share a project he recently finished up, an autonomous Airsoft tank. The toy tank makes use of a wide array of technologies to get the job done, and will stop at nothing to hunt you down (provided you are wearing an IR beacon).

An Arduino board is used to control the tank’s motors, while a Lego NXT module handles most of the other operations. The tank makes its way around using an ultrasonic sensor, which ensures it doesn’t get stuck on any errant furniture or hung up in a corner. While driving around autonomously is well and good, [Dan] upped the ante a bit by making the Airsoft turret completely autonomous as well.

He fitted a Wiimote IR sensor to the tank, successfully interfacing it with the NXT module after a bit of trial and error. Now that things are up and running, he can place his IR beacon anywhere in the room, and the tank will drive around scanning its surroundings until the target is found. Once the tank locks on, a flurry of Airsoft pellets take down whatever stands in its way.

We think that [Dan] did a fantastic job here, but see for yourself in the videos embedded after the break.

[via HackedGadgets]

Here’s an odd little box that might get those creative juices flowing for the upcoming Halloween season. [Jeremy's] creepy glowing box has a pair of ping-pong ball eyes which diffuse the red light from a pair of LEDs. Both the lid and they eyes move, and the whole thing is set up for wireless control.

The majority of the parts came from a toy RC helicopter that [Jeremy] had sitting in his junk bin. After close inspection he found that the electronics included to motor drivers for the two rotors, as well as two servo motors which worked to steer the aircraft. One of those servos has been repurposed to aim the gaze of they eyes left and right, the other servo is used to lift and close the lid of the box. This leaves the two motor controllers, one of which switches the LEDs on and off. The other doesn’t really have a purpose yet. He tried adding one wheel to the box, but turning that on just makes the whole thing crash to the floor. Check out what he’s done so far in the clip after the fold.

[lenny] decided to build a 555-based auto-firing mouse based on a 555 after seeing a similar PIC-based project we posted earlier. Lenny’s version is self-contained in one mouse without requiring a second mouse to act as the rapid-fire button. It uses only a handful of components, costs less than $5 to build, and doesn’t require any programming.

But then, [wfdudley] shakes things up a bit. He added a 4022 counter IC and some diodes to act as logical “OR” gates in order to create a unique blinking pattern (short-short-long) for the lights on a friend’s RC airplane. While this project involves more components, it’s definitely a trickier problem to solve with a 555 timer IC. We love seeing people choosing simplicity in design over popular off-the-shelf microcontroller frameworks as these two have done.

Don’t forget, the 555 Design Contest is still going strong, and you’ve got the entire month of February to submit your awesome designs. We wanted to highlight two of the more clever 555-based hacks that we’ve had in our backlog for a while, though.

[Samimy] has put together this really neat video tutorial on building a Radio Controlled secure hard drive. How can a hard drive be radio controlled? That’s the first thing we thought too. He has torn apart a remote-controlled car and is using the guts to remotely switch on power to the drive. This means that the drive is only active if you boot the computer after you put the fob in the hidden security system. It looks like it would be fairly effective. We’re curious though, if he is putting the entire drive assembly inside his PC, why rely on batteries for the circuit? Why not pull from the PC power supply? Another neat upgrade might be connecting to an internal USB connection on the motherboard so a reboot isn’t necessary.

Check out the entire video after the break.

[Leor] wanted to take some video of the wildlife in his yard, like this chipmunk or some hummingbirds, but every time he tried to get close it scared them away. His solution was to rig up a cheap video recorder to be radio controlled (PDF). The donor camera was a cheap SD card based eBay purchase that takes 720×480 video. [Leor] removed the SMD switches from the recorder’s PCB and wired up a 4066 quad bi-lateral switch IC in its place. An RC toy car donated the receiver transmitter pair. The receiver signals are monitored by an AVR microcontroller which translates the commands in a proper set of button presses for the video. What you get is a controller that and turn the camera on and set to the proper mode, and the ability to start and stop the recording.

We’ve got some pics of the hardware after the break, and [Leor] posted a bit of the chipmunk video for your enjoyment.

The component boards (click to enlarge):

Inside the enclosure:

Finished product:

While browsing through flicker this morning, we spotted this interesting image. Two radio controlled cars hooked to Arduinos. What was going on? What is [knolleary] doing with them? We couldn’t find any information so we clicked through to his personal site. What we found was a quite interesting story about how he set up a race between two taxi cabs being controlled by the Emotiv headsets for the BBC. Yeah, forget driving a Rovio around with your mind. We’re still a bit curious about the two bumper cars in the picture. We can see that his tests were done on a blue radio controlled mini, so what are the bumper cars for? Did any of you catch this on the air? How well did the taxis drive? Was he using the facial expressions or the concentration?

[Eric Austin] is using a Canon 7D with this RC helicopter to capture some amazing HD video. His success has manifested itself in a company that is now manufacturing these platforms ready-to-use. Take a look at their blog to see some of the hardware they’re working on, such as a tricopter and hexacopter photo platforms. We’ve also embedded a video after the break of the unit seen above and the stunning shots it’s able to grab.

[via Gizmo Watch]

[Tom Shannon] uses science as part of his art. One of his methods when painting is to use this radio controlled paint pendulum. He gave an interview at his studio, which we’ve embedded after the break, and goes into detail about this device. It has six different reservoirs that hold the paint colors. Each gravity-fed canister connects to a central nozzle with flexible tubing. The hand held control box has a slider for each color that moves a servo pinching each supply tube. This ingenuity keeps him creating even though Parkinson’s Disease has started to manifest itself with tremors in his hands.

It’s hard to make out the paintings seen above, but the ones on display in the video are pretty amazing. He mentions that anything can be loaded into the hoppers, including tomato sauce. Is anyone else thinking about large scale pizza constuction? This also reminds us of the mechanical bartenders we’ve seen in the past.

[Flyboy258] shows us that hobby R/C airplanes can be built from trash relatively easily. A bit of old tarp and a simple frame work as the body.  The rudder is made from old foam packaging.  It seems to fly pretty well considering the lack of official design, or aerodynamic features.

[via Makezine]

We hadn’t been here long when we stumbled upon the Drone tent. The AR Drone is a wifi controlled quadcopter that has been making waves recently. We actually got to play with one a little bit. Well, sort of. There was too much interference inside for us to fly it manually, but we did smack it around a little bit while they told us about it. It was amazingly steady and strong while it tracked a target around the tent. Check back later for more videos and details.

You can try to be unimpressed. You can attempt to feign disinterest. But even the most casual Star Trek fan will get giddy watching this model submarine in action.  Apparently there is a group that builds under water R/C vehicles from static models. It’s not Star Trek exclusively either, we saw some anime vehicles as well as a modern-day shuttle replica.

[via Makezine]

[Electricunicycle] put together this radio controlled mobile theater system to amuse his neighborhood pals. It is a projector and what looks like an electric wheelchair base. He has managed to fit a decent sound system in there as well, which required a second battery. This is pretty cool, though we could see ruggedizing it a little more to be able to drive around in fields. He states “this is one of the faster movie theaters around”. This makes us wonder what the competition is like.

Here’s something that the R/C airplane crowd might think of as old news.  These directions show us how to rework floppy drive and CD Rom motors to be high power airplane motors.  There are several listed, with details on each, but those unfamiliar might want to start with the most basic CD Rom version. It covers winding your own copper and installing the magnets in the “bell”, putting it all together and mounting it. This is a great writeup for those who haven’t seen this done before. If you want something even simpler though, you might enjoy the homopolar motor post. If you’re more advanced, they have tips for you too on machining and balancing the motors as well as winding density.

We stumbled onto one of [Nik Melton]‘s projects, an Omni-car. It is omnidirectional, meaning it can go any direction at any time without having to turn. The body was designed by him, then printed with a 3D printer. The control scheme is what interests us though. He has found a simple way to wire it to get the job done. Sure you can see that it suffers from some pretty bad “drift” when trying to go in a straight line, but overall, we think he pulled it off well.

You might want to take a few moments to look around his project page. This guy has done a bunch of fun stuff  like delta robots, strange hybrid wheel/leg robots, tesla coils, and arm mounted flamethrowers. Judging by the videos, he’s pretty young too. We think his guy has a bright future ahead of him.