[Steffen Wernéry] has published a video of the impressioning contest at LockCon. We learned about key impressioning at this year’s HOPE conference. You start the process by inserting a key blank into the lock. By turning the lock until it stops and then moving the key up and down you create marks on the blank’s face. Take a file to those marks to remove the extra material and then repeat the process. Once the pins are set properly, they’ll stop leaving marks on the blank. It takes a lot of skill to do this right, but you end up with a perfectly functional key. [Barry Wels] managed to win the competition in 5:30 with second place coming in at 6 minutes.

The Open Organisation Of Lockpickers (TOOOL) is planning a new annual gathering for lockpickers. October 9-12th they will hold the first ever LockCon in Sneek, Netherlands. The event was spawned from the Dutch Open lockpicking championships, but they’ve decided to expand beyond just competition into a full conference. This year the conference is limited to just 100 lockpickers, technicians, manufacturers, hackers, and law enforcement members. They’ll compete in picking competitions, safe manipulation, and key impressioning.

On a related note: Organizer [Barry Wels] just became the first non-German to win an SSDeV competition with his key impressioning skills. We covered key impressioning when we saw his talk about high security keys at The Last Hope. He says it’s only been about two years worth of study and 500 keys to become a master. He managed to open the lock in 5:13 filing two whole keys during that time.

[photo: Rija 2.0]

The Medeco locks have a vertical row of six pins arranged like most pin tumbler locks. Unlike your average lock, the rotation of the pins is important. When the key is placed in the lock, it not only moves the pins to the correct height, it also rotates them to the correct orientation. A sidebar blocks the cylinder unless the pins are rotated properly. Each pin has three possible orientations. They’re biaxial as well, which means the pin’s offset point allows for three more possible positions.

[Jon King]‘s Medecoder tool helps deal with the sidebar issue. Each pin in the lock has a groove running up the side. When the pins are in the correct orientation, these grooves are all perpendicular to the lock body and the sidebar can slide into place. [Jon]‘s Medecoder tool is a thin piece of wire with a sliding scale to help you position these grooves correctly.

To pick the lock, you first set all the pins to the correct height. Then, using the Medecoder you find each pin’s individual groove. All Medeco locks have the pins at the same distance from the lock face. The scale on Medecoder indicates where the pin currently is and where the pin should be. You can see [Jon] using this technique to open a lock onstage at The Last HOPE in under three minutes.

This pin vulnerability has been known in Medeco locks since 1974. With the recent release of the Medecoder, Medeco has started manufacturing ARX pins again. ARX pins don’t have the groove cut all the way to the keyway, so they can’t be manipulated by the tool. As we mentioned earlier, unlike software companies, physical security companies have no perceived obligation to patch their install base… even if they’ve known it was broken in some form for 30 years.

The latest issue of NDE has just been released and features a full write up on the Medecoder. It also details the different kinds of ARX pins that have been developed.

[photo: blackbag]

Speaking of laser engraving, the blackbag blog announced that Toool has designed 2 unique picksets for The Last HOPE this year. First is the credit card sized snap-off set seen above. They have named this one The Last HOPE emergency pickset. The other pickset is a new version of the ‘double sided pick’ series. This set consists of picks with the same tool on either end, but they are sized differently. This set will contain 8 picks with promised improvements. If you are interested in more complex picks, check out the centipede.

[via Toool]