Embedded above is a neat augmented reality business card by ActionScript developer [James Alliban]. After seeing “the most impressive business card you will ever see“, he was inspired to update his own business card. His new card has a fiduciary marker on the backside and directs you to his site. A flash app on the site displays a video where he tells you more about himself. The 3D grid of planes in the video varies in depth based on the brightness of the section. He has a few more AR and tracking demos on Vimeo.

Updated: While we’re talking augmented reality, it’s worth checking out the tech behind ESPN’s baseball tracker that uses doppler radar.

Related: Augmented reality in Flash

[via Josh Spear]

Here are two new projects from [Alex Beim] at Tangible Interactions. The video above is the bottle wall with a controllable LED behind each bottle. Embedded below is the 7×5 pixel Rainbow Box. He’s planning on writing a Quartz Composer patch to actively drive the display.

[via Create Digital Motion]

Here’s a quick demo that FAT’s [Theo Watson] put together. It uses the iPod’s accelerometer to measure how fast it’s spinning and plays the sound file accordingly. This only works on the iPod touch 2nd gen because of its curved case. He says scratching is coming next, but currently the app doesn’t know which direction it’s spinning since it’s measuring outward force. This project was done in response to [vanderlin]‘s AR scratching that used fiducials on records.

Reader [Joe Saavedra] sent in his latest project: the spatialized umbrella. The base of each umbrella rib features an LED, speaker, and distance sensor. These are connected to an ATMega168 microcontroller running the Arduino environment. The IR sensor triggers a rain drop sound based on proximity. Shorter distances mean more droplets are played. The sounds are generated using a lookup table and the digital pins. You can see the demo video embedded below.

Using the Arduino environment without the associated board is part of another idea that [Joe] is working on. The MapDuino Project uses the standard Arduino hardware for programming, but then transfers the chip to a more barebones circuit in target project. They based their initial work on the ITP breadboard Arduino.

[Alex] put together this lovely minimal LED project. The square pixel matrix is soldered directly to the microcontroller in the same style as EMSL’s Micro-Readerboard. During the prototyping phase he used resistors to limit the current from the programming board. The final product doesn’t use resistors and manages the current draw by only turning on a single pixel line at a time. The illustrated assembly guide is very thorough and should help your create an equally compact device. Check out a video of it in motion below.

TinkerKit is a collection of 20 different sensors and 10 actuators. It’s meant to make prototyping of physical computing devices much quicker/easier. The devices plug into a Sensor Hub Arduino shield. There is also a similar hub board that can emulate a keyboard; it translates sensor input directly to key strokes. It looks like a very ambitious project and it’s still in development. We love the idea though and think the wide variety of components will foster better final designs. The TinkerKit site covers the current component lineup and there’s a demo video embedded below.

Embedded above is a short segment produced by Make about one of our most fundamental circuit components: the resistor. Although brief at just five minutes, it covers resistor basics and the historical development of Ohm’s law.

Sometimes describing how a lock actually works can be the hardest part of teaching someone about lockpicking. [Mike Gee] has designed an acrylic lock that may just be the ticket for these situations. All of the pieces are cut from clear acrylic. As you insert the key, you can see it raise the four pins up to the shear line. He says that it will definitely take some tweaking as you assemble it to get it to function smoothly. Embedded below is a video of the lock in use. You can find plans on Thingiverse.

[Thanks, cnelson]

[Casey Pugh] with the help of a few friends constructed a Daft Punk style helmet for his Halloween costume. Embedded above you can see a timelapse of LED matrix construction. The 16×5 display is driven by an Arduino.

[via Bre]

tbeta is a new tool developed by the NUI Group Community. tbeta acts as an image processing layer to take in image data and output tracking data for multitouch applications. Whether FTIR or DI, scratch built multitouch systems generate IR video streams that need to be processed to find fingertips. tbeta can take this or any arbitrary video stream and run it through a series of filters to generate the touch data. This data is sent as OSC TUIO, a standard protocol for touch events. Along with the camera and input switcher, tbeta also aids in system calibration. I works on Windows, OSX, and Linux. Have a look at the getting started guide for a better idea of how it works.

[via CDM]

Advanced Beauty is a collection of 18 “sound sculptures” pairing artists and programmers to create a collaborative work visualizing sound. The styles run a broad range from fluid simulations to manipulating cell animation. The demos were built using Processing. While all of these were built using human input, we see potential for them to help improve standard visualizers. Hopefully, to bring out more information about what’s actually being played. Below is just one of the videos in the series. You can find more on Vimeo.

[via information aesthetics]