[Les] had thousands of dollars of expensive IP Telephone infrastructure at his fingertips, so he figured he might as well play around a bit – after all, what good is all that equipment if you can’t have a little fun?

Inspired by the “Awesome Button” featured on Make, he started thinking about what sort of feature he would like to have available at the push of a button. He must have had Travis Tritt on the brain the day he started building his creation, since he named it the “The Call Someone Who Cares Button”.

[Les] picked up an “emergency stop” button from eBay, wiring it to a TeensyUSB, just as it was done in the Make article. He mapped the button to the pause/break key, then whipped up a bit of C#code that listens for that key to be pressed. When toggled, the button sets forth a series of events that gets his boss on the line ASAP.

It’s a fun little project, and while I might have built a button that introduces fake static and echo into the line before dumping the call, I think it’s pretty cool all the same.

Since it seems that just about everyone has built some derivation of the Awesome Button, share yours with us in the comments, and be sure to stick around to see a quick video demo of the CSWC button in action.

[Gray] over at Geek Chique had a bit of an eBay mishap and was suddenly the proud owner of 16 Vocera B1000A badges. If you are not familiar, these badges are small, lightweight communications devices similar to the famous Star Trek communicator, which allow users to talk to other individuals via VOIP. He was working on getting the remaining badges up and running by reimplementing the server software, and figured that since one of the badges he purchased was not working, he might as well take it apart.

It took him awhile to get the well-made badges apart, requiring a rotary tool and some elbow grease to get the job done. Inside, he found that the device was split into two circuit boards, one being the “WiFi” board, and the other the “CPU” board. The WiFi board uses a Prism WiFi chipset, which was incredibly common at the time of construction. The CPU board sports small SRAM and flash chips as you would expect, with a Texas Instruments 5490A DSP running the show.

While it remains to be seen if tearing the device down helps [Gray] to get things up and running again, it never hurts to take a closer look to see what you are working with.

[Tyler] has been using Google Voice extensively for some time now, but he hasn’t quite found a microphone/speaker setup he is happy with. He tried a headset, but that just didn’t do it for him.

While browsing around at his local thrift store, he came across an old Model 500 rotary phone for just a few dollars and decided it just might do the trick. Once disassembled, he mapped out the circuitry and got busy wiring up the handset to a pair of 3.5 mm stereo plugs – one each for the earpiece and microphone.

Once everything was reassembled, he hooked it up to his computer and gave it a spin – success!

While he is happy with how the phone works at the moment, he already has plans for improving it. He is currently looking for a way to use the handset hook to disconnect calls as well as a way to implement the rotary dial for number entry. We think that hacking a Bluetooth headset would easily take care of the first part, as well as eliminate the need for any sort of wired interface to his PC. It would also make it dead simple to use with any other Bluetooth-enabled device such as a cell phone.

We’re pretty sure he is open to implementation suggestions, so let us know what you think.

We’re starting to think that phone numbers are deprecated; it may be time to integrate how we connect telephones with the new digital millennium. To get a firm grasp on this topic it is important to take a look at the reason we started using phone numbers, why we still use them, and the why’s and how’s of transitioning to a new system.

History of phone numbers

Telephone numbers started out as a way of physically addressing a telephone extension. Whether connected by an operator at a switchboard or through a magnetic exchange, each number corresponded to the hardware switch that connected the handset you were trying to ring. This originally started with named exchanges such as Pennsylvania-6-5000. The geographic location of the extension was  shown in the name and this system gradually transitioned over to area codes and prefixes.

Continued usage

The proliferation of cell phones means that numbers are no longer tied to a physical location but are routed to the nearest tower to which each wireless phone is currently connected. So why have we continued to use telephone numbers? Backwards compatibility is paramount. Cell phones overtook land lines years ago but there are still millions of people connected to the telephone companies’ wired networks. Most of the phones used on these land lines rely on the touch tone system to function. Even the advent of Voice over Internet Protocol implements the same system of connecting calls by dialing a number.

What works better than phone numbers?

How many different phone numbers does your family have? Many households have a home phone, a cell phone for each family member, and a work phone for each adult. What if all of these numbers were addressed similarly to how the Domain Name System works for internet addresses? Something like this:

phone://famiy.johndoe2155.voice/john_at_home

phone://family.johndoe2155.voice/jane_at_home

phone://www.your_company’s_domain.com/customer_service

This can be accomplished in the near future. All cell phones and many land line phones already have the ability to store numbers so that you only have to enter them once. Cell phones can already input web-style addresses and a firmware upgrade would allow for a new system of addressing and storing voice connection information. Service providers like Comcast and Charter are already providing phone service that utilizes VOIP, paving the way for dialing from your computer. For legacy hardware an inexpensive interface box similar to the digital cable converter boxes could be implemented. The new box would have a keyboard and character LCD and be rolled out in the same way that caller ID boxes were.

Conclusion

No one wants to change their telephone number and be in the position of trying to inform everyone who might ever call them. This is why laws were enacted to allow you to keep your telephone number if you change carriers. If each family owned their “voice domain”, changing carriers, cities, or even countries would be as simple as editing the domain registration. Transitioning to a new system of dynamically addressed telephone extensions is the next logical step in voice communications. Although it would be a change for billions of people, it is possible and worth taking a look at.

[photo credit Projekt Runeberg]

Vonage has promised to release an official iPhone app to compete with other providers such as Skype, and it is currently working its way through Apple’s well documented approval process. Unfortunately, this app would most likely come with an initial cost and/or subscription fee, though a way has been figured out to retrieve Vonage’s SIP authentication information, which would allow use of the Vonage network over other iPhone SIP Clients such as Fring. This solution does still contain the Wi-Fi only clause, but we have ways of making you talk, iPhone. This could also possibly be used on other platforms with SIP clients such as Android or WinMo.

[via Digg]

The team’s software is still in its early stages of development, yet incapable of parsing entire conversations. It is capable, though, of finding pre-determined keywords and inferring common phrases bases on the words it detects. It also has a higher rate of accuracy in identifying long complicated words than short ones. The team’s goal was not to eavesdrop, but to expose the vulnerability; team member [Charles Wright] notes, “we hope we have caught this threat before it becomes too serious.”

[via Schneier on Security]
[photo: altemark]

One of the more intriguing methods of wiretapping the articles discusses is a service by a company called FlexiSPY. It works by covertly installing a program onto the target’s cellphone. Once installed, the spying party can listen to anything going on in the room the target is in by calling the phone. It won’t ring, vibrate, or give any indication that it is transmitting audio data.

Some of the more hack-oriented methods involve tapping into a landline, using special software to record VoIP calls, or buying a wiretapping kit. Of course, countermeasures, are also discussed, but some of the links they provide are a little more informative on the topic of defense against wiretapping.

A used 1st generation iPhone is actually a pretty attractive device. It’s already been laid wide open by hackers so you can run pretty much anything you want on it instead of waiting for the App Store to tell you what you can and can’t do. You could use it as a WiFi Voip phone, a simple web pad, run an NES emulator, use it as a musical instrument, or build an army of robots.

What will you do when the price of used iPhones bottoms out?