Hack a Day » vu

Giant bulb VU meter

Eliot — Sat, 08 Aug 2009 21:30:27 +0000

The latest Inventgeek project is a 12 outlet control box. They decided to demo it using a giant bulb based VU meter. The control box has 12 individual outlets hooked up to two layers of six solid state relays. [Jared] notes that SSRs can be very expensive, but he purchased his on eBay for ~$10 each. Wiring and installation on this project is incredibly clean and they plan on using the control box for future how-tos. The simple audio circuit used for the VU is based on the LM3915. You’ll find full plans on the site or you can watch the overview video embedded below.

Posted in digital audio hacks, home hacks

VU Meter made with an LM3915

Juan Aguilar — Thu, 03 Jul 2008 01:45:00 +0000

So here’s the situation: you have an audio device, maybe a boombox, perhaps one you built yourself, but it has no VU meter. No problem; building a VU meter is easy with these instructions from [Joe].

You’ll need either an LM3915 or LM3916 chip, a couple of bread boards, two audio jacks, ten LEDs, and a few other components. Wire them all together per the schematic, then plug an audio source into the input jack. You can plug your speakers or output device into the output jack, and you’re done. Keep in mind that LM3916s switch negative, so positive to positive wiring from LEDs to the bread board will be necessary. The wiring on [Joe]‘s version is a bit convoluted, but it can be cleaned up on yours if you take the time. Video embedded below.

Multiband Nixie VU meter

Eliot — Sat, 14 Jun 2008 04:50:00 +0000

This VU meter project by [Daniel Naito] is a great piece of Russian electrocouture. It’s made up of 14 Nixie tubes that display seven frequency bands for the two audio channels. He found this similar project, but wanted to keep the cost low by avoiding such exotic ICs. First, the two input channels are amplified and then split using seven bandpass filters covering 60, 150, 400, 1000, 2500, 6000, and 15000Hz. Then, the AC audio is converted to DC. The final stage converts the logarithmic scale to a linear output. Besides the semirare Nixie tubes, the majority of the parts are just cheap opamps and comparators. The post is an excellent read and you can see it in action in the video below.

UPDATE: Yep, it’s a repost. I’m awesome like that. The True RMS Plasma Vu-meter seems to be new to us though.

[thanks meh]