Crystal radios from Jeri Ellsworth's museum tour

Jeri Ellsworth Tours A Radio And Tech Museum

October 27, 2017 by 12 Comments

[Jeri Ellsworth] has done some YouTubing again (yes, that’s a word, just like YouTuber) after a four-year hiatus. She’s recently uploaded a very enjoyable four-part series touring the Museum of Radio and Technology in Huntington, West Virginia.

Part one contains radios spanning the ages, starting with a spark gap transmitter, some wonderful crystal sets, pocket radios from the 1940s, commercially available amateur radio transmitters and receivers from the 1930s to the 1950s, and more. There’s even a lovely hack of a transmitter built into an old refrigerator. Part two contains educational toys, three covers television sets and cameras, and four is about all types of record players and hi-fi. Each contains equipment as old as the spark gap transmitters in part one.

You may know of [Jeri] as co-founder of castAR, an augmented reality startup that recently shut its doors, but before that she was famous among hackers for her numerous projects ranging from a flexible electroluminescent display,  a centimeter wave scanner using hacked feed horns, to yours truly’s personal favorite, a Commodore 64 bass keytar.

So nuke some popcorn, sit back, and enjoy the tour following the break.

Continue reading “Jeri Ellsworth Tours A Radio And Tech Museum” →

An In Depth Interview With [Jeri Ellsworth] About Everything

August 17, 2012 by 25 Comments

Here’s an interesting interview with [Jeri Ellsworth] over at the Jenessee Network. Usually the interviews I see popup with people are fairly short and sweet but this one really delves into many subjects and takes its time to explore. They start off talking about how [Jeri] began with hacking, which was literally smashing toys “with rocks” to see what was inside. They move on to discuss her adventures in building a race car, and then racing it as a teen… as an act of defiance.

In case you didn’t know, [Jeri] has been full time at Valve for about a year. Much of the discussion focuses on this from about 20 minutes in. She doesn’t hold back on information about what her daily life is like at valve as well as her experience during the hiring process. An interesting fact is that she didn’t initially recognize the name “Valve” and ignored them for a while. She does admit that if they had mentioned portal she would have paid a little more attention.

I was unaware that she had a side job putting the overflow of pinball machines she aquires into bars. When she moved to valve, she shut down that business, but she’s been flooding the halls with pinball machines, much to the enjoyment of the older folks.

[Jeri Ellsworth] On Making Her C64 Bass Keytar

July 9, 2012 by 26 Comments

[Jeri Ellsworth] finally set aside some time to talk about the build process for her Commodore 64 bass keytar. We think what started by taking a band saw to the guitar body ended up as a fantastic new instrument.

When she was showing off the project at Maker Faire we really only got a cursory look at what it could do. Her most recent video covers all that went into pulling off the project. Once the bulk of the guitar body was gone she tore the guts out of a dead c64 in order to mate the case with the guitar neck. Always the craftsman, she altered the computer’s badge to preserve the iconic look, then went to work adding pickups to each string using piezo sensors. This was done with Maker Faire in mind because magnetic pickups would have been unreliable around all of the tesla coils one might find at the event. These were amplified and filtered before being processed via an FPGA which connects to the original c64 SID 6581 chip.

Continue reading “[Jeri Ellsworth] On Making Her C64 Bass Keytar” →

[Jeri Ellsworth] Builds A Software Radio

July 19, 2011 by 27 Comments

[Jeri Ellsworth] has been working on a direct conversion receiver using an FPGA as an oscillator and a PC sound card DSP. Being the excellent presenter she is, she first goes through the history and theory of radio reception (fast forward to 1:30), before digging into the meat of the build (parts 2 and 3 are also available).

Continue reading “[Jeri Ellsworth] Builds A Software Radio” →

Jeri Ellsworth’s Shooting Gallery

May 9, 2011 by 8 Comments

Back with another interesting vidoe, [Jeri Ellsworth] once again brings us an amusing and educational hack. This time she’s made a “shooting gallery” in the style of the old arcade games that actually used projectiles. In her version however, she’s using LEDs in the targets which are detected by the gun.  In an effort to keep the feel the same, she rigged up a pinball bell to ding at the appropriate times and it is quite effective.

As usual, she does a great job of breaking everything down and explaining how it all works. She shows us around her prototype so you can see how it is constructed, if you can make it through the solder gun shootout in the beginning.  If she were to continue with this project beyond the functional prototype stage, we’d love to see small video clips being displayed for the targets pepper’s ghost style. Maybe we’re just having fond memories of Time Traveler.

Electro Luminescent Fun With Jeri Ellsworth

June 14, 2010 by 25 Comments

[youtube=http://www.youtube.com/watch?v=ZuDZnJX5kqw]

[Jeri] got her hands on some of the DuPont Luxprint EL ink and had some fun conducting experiments. She tried different materials for the base and the display itself.  Not only does she just play with materials, she also tears apart a VFD and an LCD to see if she could use them for parts. The LCD turned out to be the most successful. We saw this stuff show up at the Bay Area Maker Faire and we’re excited to see it become more accessible.

[via Makezine]

[Jeri] Builds A Magnetic Loop Antenna

November 1, 2017 by 43 Comments

Most new hams quickly learn that the high-frequency bands are where the action is, and getting on the air somewhere between 40- and 160-meters is the way to make those coveted globe-hopping contacts. Trouble is, the easiest antennas to build — horizontal center-fed dipoles — start to claim a lot of real estate at these wavelengths.

So hacker of note and dedicated amateur radio operator [Jeri Ellsworth (AI6TK)] has started a video series devoted to building a magnetic loop antenna for the 160- and 80-meter bands. The first video, included after the break, is an overview of the rationale behind a magnetic loop. It’s not just the length of the dipole that makes them difficult to deploy for these bands; as [Jeri] explains, propagation has a lot to do with dipole height too. [Jeri] covers most of the mechanical aspects of the antenna in the first installment; consuming a 50-foot coil of 3/4″ copper tubing means it won’t be a cheap build, but we’re really looking forward to seeing how it turns out.

We were sorry to hear that castAR, the augmented reality company that [Jeri] co-founded, shut its doors back in June. But if that means we get more great projects like this and guided tours of cool museums to boot, maybe [Jeri]’s loss is our gain?

Continue reading “[Jeri] Builds A Magnetic Loop Antenna” →