Autonomous Tank Will Track You Down, Cover You In Welts

August 16, 2011 by 14 Comments

autonomous_airsoft_tank

[Dan] wrote in to share a project he recently finished up, an autonomous Airsoft tank. The toy tank makes use of a wide array of technologies to get the job done, and will stop at nothing to hunt you down (provided you are wearing an IR beacon).

An Arduino board is used to control the tank’s motors, while a Lego NXT module handles most of the other operations. The tank makes its way around using an ultrasonic sensor, which ensures it doesn’t get stuck on any errant furniture or hung up in a corner. While driving around autonomously is well and good, [Dan] upped the ante a bit by making the Airsoft turret completely autonomous as well.

He fitted a Wiimote IR sensor to the tank, successfully interfacing it with the NXT module after a bit of trial and error. Now that things are up and running, he can place his IR beacon anywhere in the room, and the tank will drive around scanning its surroundings until the target is found. Once the tank locks on, a flurry of Airsoft pellets take down whatever stands in its way.

We think that [Dan] did a fantastic job here, but see for yourself in the videos embedded after the break.

[via HackedGadgets]

Continue reading “Autonomous Tank Will Track You Down, Cover You In Welts” →

Wireless Rover Has Two Guns…one For Each Of Ya

May 25, 2011 by 9 Comments

texas_ranger_airsoft_rover

We never really get bored with remote-controlled rovers around here, especially when they involve reusing some old hardware as well as lasers. [Tycoon] wrote in to share his creation, which he has dubbed “Texas Ranger”.

Texas Ranger is built around an old Linksys WRT54GL router, which provides the rover’s WiFi connectivity as well as the serial interface through which everything else is controlled. The rover features a pair of PIC microcontrollers, which handle all of the servo control as well as telemetry calculations.

An onboard camera gives the operator a driver’s seat view of the action, allowing for precise control of the vehicle. Laser triangulation is used to help measure object distance, and a pair of airsoft pellet guns straddle the camera for whenever [Tycoon] feels like making his presence known. One feature we are especially fond of is the pair of Wii nunchucks which the rover uses to monitor its position. Always aware of its operating angle, it auto-adjusts the camera to compensate for uneven surfaces, guaranteeing that [Tycoon] doesn’t have to tilt his head to see straight.

Keep reading to see a quick demo video he shot of Texas Ranger in action.

Continue reading “Wireless Rover Has Two Guns…one For Each Of Ya” →

Tactical Wifi Cantenna Needs Picatinny Rails

April 15, 2011 by 17 Comments

[Wes] built a cool looking Tactical Wifi Cantenna with some parts from a broken airsoft pistol. The antenna is a cookie can type with an added cone to increase performance, as seen in this tutorial. Once the antenna was built it was time to add some kind of handle, [Wes] just so happened to have such a thing on hand. After epoxy puddying the pistol’s grip to his cookie cantenna he observed that the magazine lock was still functioning. Quick thinking and the application of a  hammer in nut allows the whole rig to quickly attach to the tripod. The antenna also sports a plastic lid and textured paint finish for that ultimate tactical look and feel. A USB Alpha AWUSO36H Wifi dongle even mounts on the back of the rig. We wouldn’t go around outside pointing this at stuff attaching and detaching the tripod but the finish looks great, nicely done!

Check out some other various types of cantennas, even a rifle version if you crave more wifi goodness.

Gun Turret Built Into A Cake Box

April 3, 2011 by 17 Comments

Couch potatoes have a new line of defense thanks to this remote-controlled turret. The gun itself is a hacked down airsoft model. The mount started with a servo motor in the center of a plastic cake box. A thin strip of plywood was added, along with a couple of sliding furniture feet to stabilize the platform as it rotates. A second servo mounts to that platform, which allows the trajectory of the projectile to be adjusted up or down. A PIC 18F4520 controls both of the motors, as well as the firing of the airsoft module, all while listening for commands from an IR receiver. Just adjust the firmware to match an unused device on your universal remote and the power to annoy your roommates will be at the tips of your fingers.

You can see an overview of the build process, as well as a demonstration of the final project in the video after the break. The page linked at the top has a very detailed build log but some of the ‘next’ buttons on that page don’t work for us. Luckily you’ll see a table of contents in the right column which lets you navigate around these bad links.

Continue reading “Gun Turret Built Into A Cake Box” →

Hackaday Links: October 17, 2010

October 17, 2010 by 18 Comments

Cards you should crank

These greeting cards must be the product of a mechanical engineer run amok. They come with a crank and are designed to entertain with their simple, yet elegant movements. [Thanks Phil]

Magnetic card stripe reader

[JP] built an Arduino based magnetic card reader. It uses off-the-shelf parts but if you don’t mind buying the components this will get you up and running in no time. If you want more info there’s also this Teensy based version.

Homemade Airsoft sentry gun

This sentry gun has an amazingly fast firing rate that can continue for quite a while, thanks to the big flashlight housing that is holds a lot of ammo. [Thanks David]

Scanner easter egg

The engineers over at HP had a little fun building an easter egg into this scanner. If you know what you’re doing you can get it to play the Ode to Joy. It needs to join the old-hardware band from our Links post earlier in the month. [Thanks Googfan]

Tank Drone With Automatic Targeting And Tracking

June 28, 2010 by 23 Comments

Humankind is making some great advances toward our own destruction with this tank drone. It’s got a powerful set of treads with an Airsoft rifle perched atop. Thanks to the cameras and the laser this thing can accurately target based on color. The hardware is controlled by a collection of Arduino boards connected via XBee so that Processing can be used on a computer. Just combine this with the facial recognition from yesterday and you’ve got the first generation of Terminators. Watch the clip after the break and you’ll realize that we’re doomed. Continue reading “Tank Drone With Automatic Targeting And Tracking” →