One Hackaday Reader’s Experience Going On The Ben Heck Show

April 20, 2012 by 11 Comments

In the Hackaday Froums, [Colecago] shares his experience collaborating with [Ben Heck]. They were building some “Robot Luggage”, and you can see the episode after the break below. The idea was that they would build a piece of luggage that would follow you through an airport instead of having to be dragged.

[Colecago] shares a little about the “behind the scenes process”. There’s a surprising amount of work that goes into a very little amount of video. From what we can gather, this video took over a month to make. [Jesse/Colecago] was quite embarrassed to have run into a mistake that he called “UART Dislexia”, where he repeatedly wired the circuit incorrectly. We say, don’t stress, it happens to everyone.

Another point he brings up is how much of a pain in the butt the Arduino was in this process. While people in the comments often argue about the use of the arduino, [Jesse] explains how this specific case would have been much easier without.

Continue reading “One Hackaday Reader’s Experience Going On The Ben Heck Show” →

Hacking Automated Hand Sanitizers With Ben Heck

April 5, 2011 by 9 Comments

benheck_sanitizer

If you have visited a hospital any time recently, you probably noticed quite a few automated hand sanitizer dispensers scattered throughout the hallways and in each patient’s room. Since hospital-acquired infections are a growing problem, there has been a push for all personnel to use these hand sanitizers regularly to lessen the likelihood of spreading disease.

In the most recent episode of his web show, [Ben Heck] took on the challenge of hacking one of these dispensers to use motion sensors in order to sense when hospital personnel are near, as well as to remind them that they should sanitize their hands on the way out.

He disassembled the dispenser to see how it operated, then worked on replacing the IR sensor pair with a set of motion detectors. He hooked the motion sensors to a Propeller board, which uses a separate add-on board for keeping time. Once the motion sensors are triggered, the passer-by is given a window of time before the machine notifies them to kindly sanitize their hands. All movements and sanitizer dispensing events are logged to an SD card connected to the controller, which can be reviewed to ensure policy compliance.

If you have about 20 minutes to spare it’s worth checking out, and if you are interested in more hand washing tech, check out this DIY hand dryer we featured a while back.

Ben Heckendorn Gets His Own TV Show

September 17, 2010 by 15 Comments

That’s right, Benjamin J. Heckendorn (aka Ben Heck) has started churning out episodes of his own Internet TV show. We finally got around to watching the first episode and enjoyed it greatly. You’ll see him alter an Xbox 360 controller for a disabled gamer, making custom foot interfaces to take over the traditional role of your right hand. Also in the episode is part of a big build; making an Xbox 360 laptop out of the new slim model. We’re very interested in that overall build, but in this episode you only see him removing the components from the factory case. But we guess the promise of seeing the rest of the project is the hook to get you to watch the next episode.

Think that you haven’t heard of Ben Heck before? If you’ve been following Hackaday for a while you have. We’ve looked in on quite a few of his builds over the years, including his pinball machine, Xbox 360 portable, and his access controller.

Ps3 Laptop Courtesy Of Ben Heck

October 21, 2009 by 16 Comments

ps3s_hero1

[Ben Heck] may be the coolest person ever (take that [Adam Savage]). You would think that after producing so many laptop versions of gaming consoles he would grow tired or we would be bored of them. But no! We love each and every new production – including his latest laptop-ified Ps3. Not too much in the terms of ‘new’ comes from his latest article, but it does reaffirm some things including: why make what you can buy, cheap foam sheet should be purchased by the ton, and use the screws from an overheated Xbox 360 when you lose the Ps3 originals. Oh, and [Adam] we were just kidding, you know we will always love you. Check out a video after the break.

[Via Ps3Mods]

Continue reading “Ps3 Laptop Courtesy Of Ben Heck” →

Ben Heck Gets Sloppy And We Love It

September 23, 2009 by 18 Comments

sc_7

[Ben Heck] is a name synonymous with game system hacking. His projects have been seen and praised by people all over the world for both their quality and their ingenuity. He’s so good, in fact, that many of his projects have gone far beyond what we typically think of as hacking. They look and feel like commercial products. While that is a fantastic accomplishment, we have a soft spot for seeing stuff that is truly hacked. This lasted job he did is a great example. The controller needed to work using a single hand, so he hacked it. He was in a hurry, so it didn’t get his usual professional finish. We kind of like it that way. This one handed controller mod can be seen in action after the break.

Continue reading “Ben Heck Gets Sloppy And We Love It” →