Hand Waving Unlocks Door

September 5, 2016 by 7 Comments

Who doesn’t like the user interface in the movie Minority Report where [Tom Cruise] manipulates a giant computer screen by just waving his hands in front of it? [AdhamN] wanted to unlock his door with hand gestures. While it isn’t as seamless as [Tom’s] Hollywood interface, it manages to do the job. You just have to hold on to your smartphone while you gesture.

The project uses an Arduino and a servo motor to move a bolt back and forth. The gesture part requires a 1sheeld board. This is a board that interfaces to a phone and allows you to use its capabilities (in this case, the accelerometer) from your Arduino program.

The rest should be obvious. The 1sheeld reads the accelerometer data and when it sees the right gesture, it operates the servo. It would be interesting to do this with a smart watch, which would perhaps look a little less obvious.

We covered the 1sheeld board awhile back. Of course, you could also use NFC or some other sensor technology to trigger the mechanism. You can find a video that describes the 1sheeld below.

Continue reading “Hand Waving Unlocks Door” →

Electric Imp Locks And Unlocks Your Door Automatically

April 14, 2014 by 16 Comments

2013-11-19 14.23.18

When the folks over at PinMeTo moved into a new office, they were dismayed to find out an extra key would run them a whopping 500 sek (~$75 USD). Instead, they decided to build their own automatic door lock using the Electric Imp system.

If you’re not familiar, the Electric Imp is a small SD card designed to provide internet (Wi-Fi) functionality to consumer devices. While it looks like an SD card, you cannot just plug it into any SD card slot and expect it to work — it still needs a prototyping board. We’ve seen it used to make a wireless thermal printer, or even make a tweeting cat door to let you know of any feline intruders!

Anyway — back to the hack. To move the lock cylinder they’re using a basic RC servo connected directly to the Imp. A flex sensor is installed on the side of the door over-top the lock — this provides feedback to the Imp whether or not the door is in fact locked. The Imp then communicates to Everymote to allow for keypad access from your mobile phone.

It probably ended up costing more in time and money than a new key, but hey, it looks like it was a fun project to do!

Wristband RFID Unlocks Car Door And Starts Engine

November 14, 2012 by 19 Comments

[João Ribeiro] is an electronics engineer by day, but in his free time he likes to ply his trade on everyday items. Recently he’s been integrating his own microcontroller network to unlock and start his car via RFID. In addition to the joy of pulling apart the car’s interior, he spent time designing his own uC breakout board and developing an RFID reader from a single chip.

He’s working with a 1988 Mercedes that has very little in the way of electronics. It sounds like the stock vehicle didn’t even include a CAN bus so the prelude to the RFID hack had him installing a CAN bus network made up of two microcontrollers. One reads the velocity and RPM while the other displays it on the tachometer. When he began the tag-based entry system he used an RFID reader module for prototyping, but eventually built his own reader around the TRF7960 chip. This included etching his own receiver coil which was mounted in the side-view mirror bracket. To unlock the doors he holds the bracelet up to the mirror and the vehicle lets him in. The video after the break starts with a demonstration of the completed project and moves on to some build videos.

We certainly like the idea of using a bracelet rather than implanting the tag in the meaty part of your hand.

Continue reading “Wristband RFID Unlocks Car Door And Starts Engine” →

Cat Door Unlocks Via Facial Recognition

May 14, 2010 by 50 Comments

Faced with critters trying to get in and a cat that loved to show them her latest kill, the folks at Quantum Picture came up with a system that unlocks the cat door based on image recognition. As you can see above, it uses a camera to capture the profile of anything approaching the cat door. That image is compared to stored positive identification sets, making up a feline positive identification protocol. Don’t think this is necessary? In the writeup there’s a couple of images showing the outline of a skunk. Sounds like this system is a necessity.

We wonder if this lucky cat also has an Internet enabled cat feeder?

[Thanks Stephen]

Tech In Plain Sight: Shopping Cart Locks

February 28, 2025 by 49 Comments
The original locking wheel.

Shopping carts are surprisingly expensive. Prices range up to about $300 for a cart, which may seem like a lot, but they have to be pretty rugged and are made to work for decades. Plastic carts are cheaper, but not by much.

And carts have a way of vanishing. We’ve seen estimates that cart theft costs hundreds of millions of dollars worldwide annually. To stem the tide, stores sometimes pay a reward to people to round up carts off the street and return them to the store — it’s cheaper than buying a new one. That led [Elmer Isaacks] to patent a solution to this problem in 1968.

The [Isaacks] system used lots of magnets. A cart leaving the store had a brake that would be armed by running over a magnet. Customers were expected to follow a path surrounded by magnets to prevent the brake from engaging. If you left the track, a rod passing through the wheel locked it.

A third magnet would disarm the brake when you entered the store again. This is clever, but it has several problems. First, you have to insert magnets all over the place. Second, if someone knows how the system works, a simple magnet will hold the brake off no matter what. Continue reading “Tech In Plain Sight: Shopping Cart Locks” →

This Week In Security: Medical Backdoors, Strings, And Changes At Let’s Encrypt

February 7, 2025 by 12 Comments

There are some interesting questions afoot, with the news that the Contec CMS8000 medical monitoring system has a backdoor. And this isn’t the normal debug port accidentally left in the firmware. The CISA PDF has all the details, and it’s weird. The device firmware attempts to mount an NFS share from an IP address owned by an undisclosed university. If that mount command succeeds, binary files would be copied to the local filesystem and executed.

Additionally, the firmware sends patient and sensor data to this same hard-coded IP address. This backdoor also includes a system call to enable the eth0 network before attempting to access the hardcoded IP address, meaning that simply disabling the Ethernet connection in the device options is not sufficient to prevent the backdoor from triggering. This is a stark reminder that in the firmware world, workarounds and mitigations are often inadequate. For instance, you could set the gateway address to a bogus value, but a slightly more sophisticated firmware could trivially enable a bridge or alias approach, completely bypassing those settings. There is no fix at this time, and the guidance is pretty straightforward — unplug the affected devices.

Continue reading “This Week In Security: Medical Backdoors, Strings, And Changes At Let’s Encrypt” →

A Low Effort, Low Energy Doorbell

January 10, 2025 by 19 Comments

Bluetooth is a good way to connect devices that are near each other. However, it can drain batteries which is one reason Bluetooth Low Energy — BLE — exists. [Drmph] shows how easy it is to deploy BLE to make, in this case, a doorbell. He even shows how you can refit an existing doorbell to use the newer technology.

Like many projects, this one started out of necessity. The existing wireless doorbell failed, but it was difficult to find a new unit with good review. Cheap doorbells tend to ring spuriously due to interference. BLE, of course, doesn’t have that problem. Common BLE modules make up the bulk of the project. It is easy enough to add your own style to the doorbell like a voice announcement or musical playback. The transmitter is little more than a switch, the module, a coin cell, and an LED.

It is, of course, possible to have a single receiver read multiple doorbells. For example, a front door and back door with different tones. The post shows how to make a remote monitor, too, if you need the bell to ring beyond the range of BLE.

A fun, simple, and useful project. Of course, the cool doorbells now have video. Just be careful not to get carried away.