Mr. Tea Is A Hot Plate And Magnetic Stirrer In The Same Enclosure

January 30, 2013 by Mike Szczys 17 Comments

mr-tea-stir-and-hot-plate

Not being a coffee drinker [Hunter Scott] wanted a way to make tea while lurking in his workshop. Well it’s not exactly rocket science, as all you need is water at the right temperature and a vessel in which the tea can be steeped. But we do commend him on not only building a nice little hot plate enclosure, but rolling a magnetic stirrer into the other side of the box.

You heard us right, the stirrer is not combined with the plate, but resides on the underside of the same PSU enclosure. The plate itself is from a unit he bought at the store and cannibalized. The light switch dimmer lets him adjust the heat it puts out. When not hot, he can flip it over and use the stir plate. This consists of a hard drive magnet attached to a PC fan. For the stirrer itself he encased a neodymium magnet in some thermoplastic. The magnetic combination works well together with a demonstration which shows it stirring water through the base of a tea-cup.

Inaccurate Breathalyzer Is Still Quite Nice

January 25, 2011 by Mike Szczys 14 Comments

Sure, [Hunter Scott’s] Breathalyzer can only differentiate between hammer and sober, but look how nice it came out. He’s using an MQ-3 alcohol sensor which, from previous projects, we know is very difficult to accurately calibrate. But if you want to monkey around with embedded systems you’ve got to have a goal. [Hunter] chose a gorgeous aluminum project enclosure, adding a big LCD display to the to the lit. The switch on the bottom selects between on, off, and charging modes. He’s using a USB charger from Adafruit to top off the lithium battery inside. Everything runs on 3.3V with the exception of the sensor which gets its 5V supply from a boost converter. An Arduino is the brains that pulls everything together.

See [Hunter’s] video description of the project embedded after the break.

Continue reading “Inaccurate Breathalyzer Is Still Quite Nice” →

Composing Music With The Force Trainer

May 18, 2010 by Mike Szczys 9 Comments

In the ongoing quest to make the Force Trainer useful [Hunter Scott] developed a music composition platform for your mind (channel Jack Black’s voice for the last half of that sentence). Using the Force Trainer’s serial port [Hunter] feeds the data stream into a computer via an FTDI cable and uses Processing to make the music. It’s good, and the demos on his site are worth the click, but we still can’t get enough of the shocking video from back in March. But we digress, let [Hunter] walk you through his setup in the video after the break. Continue reading “Composing Music With The Force Trainer” →

Hackaday Podcast 158: Phased Array Physics, CRTs Two Ways, A Micro Microcontroller, And A Surgically Implanted Red Herring

March 4, 2022 by Dan Maloney 1 Comment

Join Editor-in-Chief Elliot Williams and Staff Writer Dan Maloney as they take a look at the week’s top stories, taken straight off the pages of Hackaday. What happens when you stuff modern parts into a 90’s novelty PC case? Nothing good, but everything awesome! Is there any way to prevent PCB soil moisture sensors from being destroyed by, you know, soil moisture? How small is too small for a microcontroller, and who needs documentation anyway? We also cast a jaundiced eye — err, ear — at an electronic cheating scandal, and if you’ve ever wondered how phased arrays and beam steering work, gazing into a pan of water might just answer your questions. We also share all our soldering war stories, and hey — what’s with all these CRT projects anyway?

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct Download (52 MB, but sounds like at least 58 MB!)

Continue reading “Hackaday Podcast 158: Phased Array Physics, CRTs Two Ways, A Micro Microcontroller, And A Surgically Implanted Red Herring” →

Gertrude Elion, DNA Hacker

January 25, 2018 by Kristina Panos 17 Comments

Some people become scientists because they have an insatiable sense of curiosity. For others, the interest is born of tragedy—they lose a loved one to disease and are driven to find a cure. In the case of Gertrude Elion, both are true. Gertrude was a brilliant and curious student who could have done anything given her aptitude. But when she lost her grandfather to cancer, her path became clear.

As a biochemist and pharmacologist for what is now GlaxoSmithKline, Gertrude and Dr. George Hitchings created many different types of drugs by synthesizing natural nucleic compounds in order to bait pathogens and kill them. Their unorthodox, designer drug method led them to create the first successful anti-cancer drugs and won them a Nobel Prize in 1988.

Continue reading “Gertrude Elion, DNA Hacker” →

Display Your City’s Emotional State With Illuminated Snow

February 5, 2015 by Rick Osgood 8 Comments

[Hunter] wanted to do something a bit more interesting for his holiday lights display last year. Rather than just animated lights, he wanted something that was driven by data. In this case, his display was based on the mood of people in his city. We’ve seen a very similar project in the past, but this one has a few notable differences.

The display runs off of an Arduino. [Hunter] is using an Ethernet shield to connect the Arduino to the Internet. It then monitors all of the latest tweets from users within a 15 mile radius of his area. The tweets are then forwarded to the Alchemy Sentiment API for analysis. The API uses various algorithms and detection methods to identify the overall sentiment within a body of text. [Hunter] is using it to determine the general mood indicated by the text of a given tweet.

Next [Hunter] needed a way to somehow display this information. He opted to use an LED strip. Since the range of sentiments is rather small, [Hunter] didn’t want to display the overall average sentiment. This value doesn’t change much over short periods of time, so it’s not very interesting to see. Instead, he plots the change made since the last sample. This results in a more obvious change to the LED display.

Another interesting thing to note about this project is that [Hunter] is using the snow in his yard to diffuse the light from the LEDs. He’s actually buried the strip under a layer of snow. This has the result of hiding the electronics, but blurring the light enough so you can’t see the individual LEDs. The effect is rather nice, and it’s something different to add to your holiday lights display. Be sure to check out the video below for a demonstration. Continue reading “Display Your City’s Emotional State With Illuminated Snow” →

Nikes With Power Laces, Just In Time For Next Year

October 29, 2014 by Brian Benchoff 21 Comments

With the world’s first hoverboard being shown a few days ago, we’re on the verge of the fabulous world of tomorrow from Back to the Future. Hoverboards are cool, but there’s a wealth of other cool technology from the far-off year of 2015: Mr. Fusions, inflatable pizza, Dustbusters, and of course, Nikes with power laces. [Hunter] just built them, and with the right shoes, to boot.

[Hunter] is using the BttF-inspired Nike Air Mag shoes for this build, along with a few bits of electronics – an Arduino pro mini, a force sensing resistor, and a motor. The build began by carving out a notch in the back of the shoe for the electronics. A small bit of fishing line goes around the shoe, providing the power behind the power laces.

A force sensitive resistor under the heel of the insole tells the microcontroller when a foot is inside the shoe, and a rotary encoder on the motor shaft makes sure all the power lace cycles are the same. It’s not quite the same as the shoe seen on screen – the lower laces can’t be replicated and it’s certainly not as fast as the BttF shoes, but it does work, and as far as shoelaces are concerned, they work well.

Videos below.

Continue reading “Nikes With Power Laces, Just In Time For Next Year” →