A Crystal Radio Amplifier In A Jar

August 11, 2013 by Mathieu Stephan 20 Comments

The cool thing with crystal radios is that they are solely powered by the incoming radio waves. However, it usually means listening to your AM radio station with an earpiece and even then, depending on the antenna length, ground connection, and radio station, it can be quite hard to hear.

Even though it is cheating, [Steven] decided to make an amplifier for all the different crystal radios he had made over the years. His design, based on an LM386 amplifier was firstly tested on a breadboard and then permanently soldered onto a perfboard. To make the complete system easy to transport, he opted for a peanut butter jar where he embedded the speaker in the cap. The on/off switch and volume controls are mounted on the side, and easy alligator clips are used for the antenna connection.

The final result is not the one shown in the picture above as [Steven] painted the jar black, giving it a sweet look.

A Variable Capacitor Made From Junk

July 25, 2013 by Brian Benchoff 28 Comments

cap

[Jezan] decided to introduce his son to electronics by building a small crystal radio. These crystal sets have been around for a long time, and make for a great beginner electronics project, but some of the required parts are a little hard to come by. The most difficult to source part for these radios is a variable capacitor, and not finding one in his parts bin, [Jezan] decided to make his own.

This variable capacitor comes directly from a piece of 1.5 mm thick aluminum sheet. Instead of fancy CNC machines, power tools, or even a pair of tin snips, [Jezan] cut the rotors and stators for his variable capacitors with a pair of scissors. The center hole was punched out with a piece of sharpened pipe, and all the pieces were filed down and sanded for a perfect finish.

Considering the variable caps you can get your hands on are either rare or very old, this looks like a great afternoon project for the budding electronics wizard or radio enthusiast. [Jezan]’s craftsmanship is incredible as well and the finished part looks like it came off an assembly line.