Making The IM-ME Dongle More Useful

So you’ve hacked your IM-ME six ways from Sunday but don’t know what to do with the USB dongle? [Joby Taffey] set out to make this leftover a useful part of the hacking arsenal. He pulled off the USB connector and the USB controller chip. From there he glued on the pin headers as pictured above in order to turn this into a breadboard-friendly single in-line package. But wait, that’s not all… for the low-low price of common components he also built a power and programming cable. Once it’s all said and done you can load PinkOS, an operating system he developed for the device which lets you operate the onboard radio via serial protocol.

Need a better overview of the hardware on the board? [Joby] laid the groundwork for this hack back in October.

15 thoughts on “Making The IM-ME Dongle More Useful

  1. I don’t understand it. Why did they add another microcontroller to the dongle. That CC1110 radio chip has a bigger brother (the CC1111) which has a fully functional USB transceiver as well…. Cool chip by the way.

  2. @Joby as I mentioned previously, the coral cache link does not work for me. After you sent the link I tried again. It still does not work. If you flush your browser cache and try again you may what I see:
    —–
    This webpage is not available.
    The webpage at http://blog.hodgepig.org.nyud.net:8080/2011/01/20/im-me-dongle-walkthrough/ might be temporarily down or it may have moved permanently to a new web address.
    —–
    Oh, I see that you may not have seen my previous message which is “awaiting moderation”. Apparently it was not moderate enough… ;-)

  3. Yay! The site is up again! For now… ;-)

    Back when my hackaday SD Floppy page went viral, my ISP dropped me for too much bandwidth consumption (literally thousands of hits per day, with hundreds of links to my uanr.com/sdfloppy page from all over the world, and it took days for my domain name to propagate to my IP address at the new ISP.

    I hope you do not lose your ISP for this, Joby. :-)

  4. @Rob
    Now I recognize you. And oh my aching field density equalizers! I thought I recognized you when you posted the earlier one. I’ve studied that page to the point where I nearly tracked down the appropriate router just to add that style of external storage to it. (Plus the dual serial ports.) But naturally I never did.

    That’s an interesting project you’ve got there, Rob, nice one.

  5. @wvdv2002
    There’s all sorts of reasons for choosing multiple chips over a single integrated solution – price, part availability, previous experience with a chip (which reduces development time and cost) etc etc.

Leave a Reply to pelrunCancel reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.