Blowing Up Capacitors

[grenadier] wrote in to show us a video of some capacitors being blown up. Yup, that’s it. Just some capacitors being blown up. You might be wondering what there is to learn from this video. The answer is… nothing. It sure is fun to watch though. We’re all busy trying to find some nice hacks to share with you, so we figured you could watch some stuff getting destroyed while you waited.  Here’s someone using explosives to reveal art behind a thin layer of concrete on a wall. Here’s some high voltage destroying multimeters. How about a turkey being cooked with thermite? Thermite works on hard drives too.

Ok, enough of that. This was a gentle reminder to send us tips to your projects.

[youtube=http://www.youtube.com/watch?v=3b7mjukhTyQ&w=470]

45 thoughts on “Blowing Up Capacitors

  1. I enjoyed dumping my 330J 170V capacitor bank into the pencil-eraser-sized electrolytics from old computer motherboards. They went off like firecrackers. That was a lot of fun.

  2. Yes, you can learn that inverting a electrolitic cap polarity or exposing it to a highger voltage is not a good idea and you should be careful…

    May caps blowned in the laboraory when I was at school ;)

  3. Ok, this just upsets me now. I have sent in a set of quality projects TWICE now and have watched it get pushed aside for crap like this. Not saying I don’t like to watch capacitors blow up, but thats not what I come to this site for.

    Project 1: using a microcontroller to turn old ADB tablets into usb

    Project 2: Making a usb Cintiq out of an old tablet pc screen

  4. using a microcontroller to turn old ADB tablets into usb

    really? last year trew a couple out :( was hoarding them for years…

    also: magic smoke can no longer hide!

  5. All hail the magic smoke! You know, you’ll never get it back in there now. First discovered magic smoke plugging in a floppy drive incorrectly on my apple //. Heard a loud BANG… and GAWD what a smell!

  6. More fun was flipping off the teachers switch to all the lab desks in the EE lab, then loading a couple of the outlets with the Styrene caps (They go BOOM!) so when the TA comes in they get a nice big BANG from them flipping the switch.

    That and being bored and charging all the caps in the drawer for the next guy…. reach in and OW!

  7. Wow… I thought I was the only one who said that electronics ran on magic smoke. “Don’t let the smoke out”. Freakin weird. Did that come from somewhere or did we all just come up with the same idea?

    1. That definitely came from somewhere, although from where I don’t know. I first heard that in the Navy’s Basic Electricity and Electronics school (or “BEEP” school, for short) in 1978. After pestering an instructor for a while about what REALLY happens inside the solid-state monolithic electronic components of the day, I was finally informed: “Everything electronic runs on smoke. You can tell because, when you let the smoke out, they don’t work anymore!”

  8. @Will…

    Wow, hacking old ADB compatible tablets (e.g., Wacom) back to life with an ADB/USB bridge and making overpriced Cintiq (Wacom again) devices out of hacked parts. Good stuff.

    Too bad Hack a Day isn’t really about hacking these days. Sorry to hear your submissions were sidelined. Maybe the HaD kids figured there would not be enough interest to post your work (not enough page view which equals Ad money). Hmmm…

    Anyway, give us the links to your work. Hopefully HaD won’t block them.

    1. @all complaining about sending in hacks that didn’t make it… THANKS!

      While there is plenty coming in, I just wanted to share this video and be goofy, I’m also going back and finding cool stuff that got lost in the shuffle.

  9. We did this once at a company I used to work for. We were testing non-explosive propellants for ammunition (ie – not gun powder, or volatile propellants). Our goal was to build a weapon that could travel on commercial airlines (for the government of coarse) without explosive hazards. When you put a small electrolytic to 120VAC mains, it was like a fire cracker. HAHA Bigger one just mostly fizzled. Darn you 22,000uF!!!

  10. When I went to NE TEch, they turned off the breakers to the classrooms end of the day. One of my classmates went into the storage and put a 100 micro farad cap in every outlet (8) of every powerstrip (20)so when the breakers went on it sounded like a gun fight. We laughed but the teacher wasn’t amused

  11. I know it says I can’t learn anything from this video, but I am going to try.

    Why would reversing the polarity on a capacitor make it blow up? That is something I have never understood (I only have a basic two-plate physics model for capacitors, which have no bias).

    Also, if you very slowly charge a capacitor up beyond its limit, does it also explode; does it cause dielectric breakdown or something?

    Thanks!

  12. @Will, thanks for the links. I’m looking now.

    @Caleb, Thanks for picking up on the issue of submissions not getting posted. Often the best stuff is in hidden in the rough. Knowing how to recognize it is the key.

    1. @drone,
      Thanks but I haven’t resolved it. You see, we get TONS of emails and none of us hold regular office hours. Stuff simply gets forgotten/claimed by someone who ends up not writing it/ etc. If your project doesn’t get plopped onto the site soon, hit us again and again until someone gives you a reason.

  13. @Matt

    Why would reversing the polarity on a capacitor make it blow up?

    It varies depending on the cap – different technologies have different failure modes. For tantalum caps, AVX says: “Under reverse voltages, experimental evidence within AVX indicates that a component of the reverse leakage current flows in very small areas of microcracks or other defects in the dielectric layer. Although the current may only be a few microamps, it represents a very high localized current density which can cause a tiny hot-spot. This can cause some conversion of amorphous tantalum pentoxide to the more conductive crystalline form. When a high current is available, this effect can avalanche and the device may become a total short.” http://www.kyocera.co.jp/prdct/electro/pdf/technical/revtant.pdf

    Also, if you very slowly charge a capacitor up beyond its limit, does it also explode; does it cause dielectric breakdown or something?

    What do you mean exactly by “charge a cap up beyond its limit”? When you apply a voltage to a cap it charges to that voltage at a rate based on the time constant. Really the only way you can “overcharge” a cap is by applying a voltage that is significantly higher than it’s rated voltage. That’s really easy to avoid – just get a cap with a high enough voltage rating for the voltage you are applying. Generally what happens if you apply too high of a voltage is chemical reactions can occur that eat away the plates and punch holes in the dialectric, which causes a short and high current/power.

  14. So wasting capacitors and filling landfills with their toxic residues is a hack?
    Hey, I’ve got a hack too: how about dumping mercury into a gutter? That’s hilarious too, the fish all go belly up!
    And if seeing things blow up makes your day, just look for Semtex or RDX on YouTube. Or get a life.

  15. “Why would reversing the polarity on a capacitor make it blow up?” It literally says this right on the page above the video on the teravolt website.

    If nothing else, at least this shows that the venting slits on top of capacitors do work.

  16. @OMGLOLZ,

    I was thinking the same thing, anyone with half a brain could tell you this isn’t something very suitable for the outdoors.

    Here at hackaday we save electronics from going to the landfill and then we even the pollution by blowing off smoke from capacitors.

    I wonder why this person was doing it outside? Surely you can blow these off in a closed room with the windows closed, the smell is like brand new electronics who doesn’t like to inhale that stuff?!?! /s

  17. there isnt many geeks who DONT like blowing up capacitors(besides 1s who have never tried it)
    i personally use a little butane torch on old boards directly on the caps(with a little hand shielding to prevent injury)
    they give a nice little pop without overloading them electrically :D

    also, they produce confetti when they go pop!

  18. Almost went to jail doing this one time. Found out it’s illegal to have “fireworks” in Georgia (back then). Hard a heck of a time convincing the cops that those little firework looking, and certainly sounding, things were NOT actually fireworks!!

    Then later, some kid we worked with found out that by inserting the 10uF size caps into a small plastic tube that some parts came in, you could create a “capacitor cannon”!! Loved it! Wernt through lots of caps though, hard a heck of time getting him to stop wasting parts!

  19. if you do not like to see different things like cap popping or “this is not a hack” stuff then stop coming here and whining its annoying. Your not in the spirit of hacking. i would suggest for you to watch a documentary called “The History Of Hacking”
    Google it. if you never seen it its a grate watch.

  20. Oh memories… One day, our grade 12 comp engineering prof was away and thought us responsible enough to manage without a substitute… so we proceeded to waste the time ripping caps out of old motherboards and blowing em up with large power supplies, we even made a little detonation zone and everything… Oh memories…

Leave a Reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.