E-bike Across Canada For $10

August 19, 2009 by Mikey Sklar 29 Comments

Justin Lemire-Elmore E-bike

[Justin Lemire-Elmore] spent one month riding his electric bike across Canada last summer. He made the journey from Vancouver to Halifax in 30 days using a mere $10 worth of electricity to recharge his bike. He put together a rather bizarre looking semi-recumbent bicycle to hold all of his gear. The motor controller, charge controller, battery packs, and lighting system were all his own design. He has a captivating 2 hour presentation embedded below in which he describes all the problems he had with his equipment during the trip as well as all the great experiences the journey offered. Continue reading “E-bike Across Canada For $10” →

Chainsaw Powered Bicycle

July 11, 2009 by Gerrit Coetzee 37 Comments

chainsawbike

We’ve covered weed whacker bicycles before and you can even buy 66cc conversion kits now. [geoff390] posted a few videos over on YouTube about another motor option. In the first video embedded below, he goes over the basic parts of his bike. The chainsaw motor is mounted to the side of the back tire and a metal drive wheel extending from the chainsaw shaft makes contact with it. The motor assembly is mounted on a hinge and the friction between the drive wheel and the back tire is adjusted with a turnbuckle. He posted a more detailed second video in which he goes over some of the finer details of the bike and some of the issues he’s had. Continue reading “Chainsaw Powered Bicycle” →

RGBike POV

June 15, 2009 by Eliot 7 Comments

rgbike_pov

[Hazard] wanted a full color POV display for his bike wheel. Adafruit’s SpokePOV is single color and Monkeylectric’s original version didn’t display images. He also balked at the cost and decided to manufacture his own version. It uses 16 RGB LEDs on a single layer board he manufactured himself. It’s an entirely through-hole design to make assembly easy. It uses a hall effect sensor to synchronize the image display. The two main components are an ATmega328p microcontroller, which should make it Arduino compatible, and a TLC5940 PWM LED driver. It’s a very well documented build and certainly a good looking effect.

[via adafruit]

CrossCanada: A Biking Documentary

June 9, 2009 by Caleb Kraft 25 Comments

bike_arm

[Mike] was going to be biking across Canada. He really wanted to document the trip, so he began planning ways to get still images taken at intervals along the way. After a bit of brainstorming, he ended up setting his goals a bit higher. He was going to film the entire trip. He really didn’t want a simple helmet cam, he wanted himself and the entire bike in the frame. To do this he had to build a long arm on which he mounted a bullet cam. On his handlebars, he has a simple control where he can turn the system on and off as well as initiate recording.

No single piece of this project was too complicated, but taken all together, the final result is quite nice. You can watch the video for yourself after the break.

Continue reading “CrossCanada: A Biking Documentary” →

How To Properly Dispose Of Fruitcake

December 25, 2008 by Eliot 7 Comments

[youtube=http://www.youtube.com/watch?v=3Tsgz3G0E1c]

While doing serious fruitcake research, (no, really) we stumbled across the Great Fruitcake Toss held every January in Colorado. The particular entry above caught our eye. Omega 380 was built by a group of Boeing engineers and currently holds the distance record of 1,420feet. It’s a large compressed air cannon. All pressure is human generated using an exercise bike turning a pump. Apparently the team’s first contest entry was a classic surgical tubing slingshot. It eventually broke down during a very cold year, so they switched to this newer design. You can see more videos on the Operation Fruitcake blog.

Bicycling In The Fall

November 24, 2008 by Caleb Kraft 10 Comments

bicycle

Every year, as it gets cold, many of us put our faithful two wheeled companion away for the winter. Despite that, there have been a veritable smorgasbord of bicycle related projects posted to instructables this last week. In honor of our human powered transportation, lets take a peak at a few projects.

Bicycle safety is always paramount. They can be fairly difficult to see compared to a car. There are many ways to make them easier to spot, such as wrapping them in reflective material, or adding blinking tail lights. Even if people do see us, they often have no idea where we are planning on going. To remedy this, we can always add turn signals. It can also be hard to see where you are going at times. Adding a head light, or helmet light can really help. If you’re not a big fan of LEDs and want a little retro flair, you can always add an oil lamp.

For those who live in warmer climates, or just can’t give up their bicycles, you may wish to add some festive decorations. Covering your bike in Christmas lights doesn’t look too difficult, and a CFL lit wheel is a cheap way of adding some cool effects.

Flickr Photo Bike

September 15, 2008 by Eliot 3 Comments

Lifehacker’s [Gina Trapani] has one of Flickr’s photo bikes and wrote up how it works. As you ride, the bike automatically takes photographs, geotags them, and uploads them to Flickr. The handlebar unit contains a Nokia N95 cellphone. The rear is a solar powered charging unit. It has a custom python script that starts the photo taking sequence when it detects the bike is in motion using the phone’s accelerometer.

Most of the engineering seems to be for usability’s sake. We’re guessing they probably wanted to disguise that they’re bolting a $600 cellphone to a bike as well. Out of the box the Nokia N95 already does almost everything required. It has a 5 megapixel camera with an interval timer that can vary from 10 seconds to 30 minutes. It supports Flickr uploading, but with software like ShoZu you can streamline the geotagging and make all uploads automatic. Just build a solid mount for your N95 and you’ve pretty much got it, and when you park your bike you can take the phone with you.