Preorder TI’s ARM Cortex-M4 Launchpad for $5 delivered

Texas Instruments just open preorders for the new Stellaris LaunchPad. The boards won’t ship until the end of September, but if you don’t mind the wait you can get one for $4.99 including delivery (we’d wager non-U.S. addresses have to pay for delivery, but leave a comment if you know for sure several readers have reported that international shipping is free).

We routinely pay more in shipping for parts orders so we already jumped at the opportunity and put in our own order. Earlier in the month we heard the first murmurs about the device. We’re glad to see they hit the $4.99 target price, but the TI website mentions that this is a promotional price that will be available for a limited time only. The board boasts an ARM Cortex-M4 processor, the Stellaris LM4F120H5QR. It includes 256 KB of flash memory, 32 KB of SRAM, and more peripherals than you can shake a stick at. To get you up and running quickly they’ve included two user buttons and an RGB LED. As with the 16-bit Launchpad, the board acts as its own programmer. It has a microUSB jack, but they’ve included a micro B to USB A cable in the kit to make sure you don’t need to also put in a cable order.

We’ll give a follow-up post once we finally get our hands on the board. We hope this will be easy to get working with a Linux box!

[Thanks Chris]

Comments

  1. Paul says:

    At this point, maybe “delivered” is an overly strong word?

  2. jurriaanpruis says:

    Free shipping also for non-US addresses (The Netherlands)

  3. jurriaanpruis says:

    I got free shipping to The Netherlands ;)

  4. m.Alin says:

    When I ordered the $4.99 MSP430 LaunchPad, I didn’t have to pay for delivery. I live in Romania. I expect it to the same with this board.

  5. zhiva says:

    Just ordered 2, and it was no extra cost to Norway.

  6. Ian says:

    It says “Shipping Included in Price of Item” to the UK. Great deal, TI!

  7. George Hahn says:

    Bought two!

  8. Tadpole says:

    Ordered the *limit* of two boards to be sent to Austria and was billed only the $9.98 (no extra fro shipping). Seems to be *free shipping* worldwide. Gotta love it!

  9. Eric says:

    The original launchpad is a 16-bit MCU fwiw, not 8-bit (minor nitpick :-))

    Also, there’s a wiki page that talks about TI’s launchpad BoosterPack layout which attempts to set some standards for how the pins will be used & what options are available- http://processors.wiki.ti.com/index.php/BYOB

  10. Juliusz says:

    International delivery is also included in the price – no additional costs were charged for delivery to Poland.

  11. Atomhax says:

    Bought 2

  12. Ludo6431 says:

    No shipping cost for France.

  13. Filipe YaBa Polido says:

    Just ordered mine. I’m from Europe/Portugal.
    They didn’t charge anything for delivery :)
    Nice :D

  14. icanhazadd says:

    How long will it be before we see a post about someone cutting this board in half? ;-)

  15. xamosx says:

    Free shipping to Canada. Ordered two, thanks for the tip.

  16. anonymous says:

    Anyone know about the toolchain, simulation or programming under a linux environment?

  17. Ren says:

    +2

  18. gigavolt says:

    I wonder when they’re going to start shipping the Raspi. I ordered mine about 18 years ago, haven’t heard a thing.

  19. Dan says:

    Does anyone know where you can get little plugs (with wires coming off them) that fit on those header pins so I can easily attach peripherals to the thing?

  20. spacevs says:

    Free shipping also for non-US addresses (Australia)

  21. Kaz says:

    Thanks for posting this — I was waiting for the e-mail from TI telling me it was available… it didn’t come :(

  22. iHME says:

    Ordered it :)

  23. Colecago says:

    Datasheet says no PWM on the 120 series?
    Page 43

    • BobFeg says:

      See page 706

      PWM Mode
      A timer is configured to PWM mode using the following sequence:
      1. Ensure the timer is disabled (the TnEN bit is cleared) before making any changes.
      2. Write the GPTM Configuration (GPTMCFG) register with a value of 0x0000.0004.

    • Jim Kemp says:

      The table, I’m guessing, is indicating the LM4F120H5QR does not support any “Motion PWM” outputs.

      However, looks like the the timer module supports 12 PWM output pins.

      See page 59 / section CCP Pins.

  24. S W says:

    Someone told me they could boot windows on this…… Practically impossible…. Any os’s you could load on it?

  25. avikdhupar says:

    Looks like hackaday has contributed to the DDoS. I’m unable to access the store! not even through a proxy!

  26. BobFeg says:

    Took me 10 minutes of trying before I got into the TI store.

    Have two of these babies ordered up, can’t wait to get them. This is even better than the MSP430 launchpad deal was :-)

  27. jlargentaye says:

    How does this compare to the STM32F4 Discovery eval board, also based on the ARM Cortex-M4? I still have an eval board gathering dust since I got it when Hack A Day mentioned it a while ago.

    • dizot says:

      This Stellaris board is outclassed by the ST board :

      TI
      80MHz max
      128K flash
      32K RAM
      No external peripherals

      ST
      168MHz max
      1MB flash
      192K RAM
      Audio DAC w/class D amp, MEMS sensors, etc.

      The TI processor / board seem more targeted at industrial control…or so says the documentation. It doesn’t natively support I2S, for instance.

      I still bought two when TI emailed me…can’t go too wrong when the whole board is the price of the MCU itself with no shipping.

    • rasz says:

      ST doesnt recognize the power of “getting them while they are young”. TI ships those cheap dev kits at a loss (even absorbs shipping) in house.

      ST insists on resellers like arrow or element’teen. Thats great if you target companies or established developers, but will not grow your customer base. Students/ hackers/ kids like cheap, dont like being raped by surcharges and expensive shipping.

      • dizot says:

        I agree. And it doesn’t help that ST doesn’t have an in-house toolchain [not last time I checked, anyhow]. They force everyone to use third-party tools. Having options is great, but not having a free, ST-supported toolchain makes it harder to get into developing for the STM32 line.

        Atmel and Microchip have always done a good job there, offering everyone a decent set of free tools. The choice to not use them is always an option, too.

        I hope that TI’s strategy includes catering to that demographic by offering an uncrippled version of CCS. Reducing the barrier to entry with quality free development tools eliminates the cost of development as a valid excuse for not using their ICs. I assume they will at least offer a board-locked version of CCS, so that’s a start.

  28. J. Peterson says:

    Ditto questions about the toolchain for the Stellaris. I used one in a contest a couple years ago, and the only thing directly available was a Keil system for $1K+. The contest organizers provided a “free” copy that promptly died after the submission date.

    Hopefully a flood of $5 dev boards will precipitate some open-source solutions.

  29. Matt says:

    Tried to order 2 to Ukraine, and got this message:

    “Items in your cart may have been removed based on product availability. Please review your cart before proceeding with checkout.”

    Nothing remained in my cart. Bummer.

    • Bill Stewart says:

      Try again – the store was failing earlier today.

      I got that message even when my order succeeded, but it did show that I had the one board I was trying to order. I don’t know if the “removed” boards were really removed, or just a warning that it might have done that, or if it was fixing the three or four unsuccessful attempts…

    • S says:

      he. My order failed the first time with an unknown error so tried again and the second time succeded.

      Then after checking my orders I see that was placed twice and have 4 boards pending to ship!

  30. Necromant says:

    Thanks, hope it’s not that laggy like back at evalbot rush.

  31. f8 says:

    discovery board STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package

    it’s m4 board ARM CORTEX-M4F 80MHZ 256KB Flash 32KBSRAM 2KB EEPROM

    <a href="http://forums.arm.com/index.php?/topic/15986-just-got-an-stm32f4-discovery-board-needing-a-little-help/&quot;

  32. techpreps says:

    No idea what I’m gonna do with them yet but I ordered the max of two. The site seems slow but it worked for me.

  33. sneakypoo says:

    It’s a bit silly that you have to supply a bunch of company information when they know damn well that there’s mostly hobbyists ordering these. Rather than making up info I opted to not order at all. Meh.

    • Paul says:

      Do they really “know” hobbyists are buying these boards?

      • sneakypoo says:

        If they don’t their market research department is doing a lousy job.

      • Ellias says:

        They’re clearly aiming it at the hobbyist market, with that price tag of $5. Big corporations don’t care so much about price, they are more concerned about support and long-term availability. After all, if they’re going to pay $7k on the development software, $5 or $100 on the development board don’t make much of a difference.
        But I’m so pissed I can only order two of these. I’d like to stock a couple more and give away another couple to friends.

    • Aaron says:

      All three of those non-required “Company Name” fields were enough to put you off, huh? Shame about that.

    • Bill Stewart says:

      I put “Consumer electronics – other”, and indicated that I wasn’t an arms dealer or whatever. If their marketing people can’t figure out that my company named “none” isn’t really selling stuff, too bad.

    • cocasdaneve says:

      I may be wrong, but I believe they are required to ask those questions to export, almost everytime I buy microcontrollers from the US I have to answer some kind of variation of one of those. The last time I ordered XMEGAS from mouser they had to ask similar questions by email before shipping.

      Kind of silly, I’m pretty sure a super-villain would not say they would be used for global domination…

  34. MrX says:

    Ordered 2 to the UK, free shipping,

    Looks like a lot of fun to be had!

  35. Philip says:

    Free shipping all the way to New Zealand :D

  36. jc says:

    shipping to Czech Republic is also free. I put in ‘no company’ as the company name and ‘none’ into company url. I wonder if it’ll work…

  37. Luis says:

    For some reason after i login my cart is empty and i can not “buy” again, tested on chrome and firefox

  38. eclipse says:

    come all the way to payment (after customs questions) to get stuck @ “processing” (cant fill out billing info)

  39. Tomasito says:

    Ordered two from Argentina, free shipping also.

  40. Seshan says:

    Ordered two, Now, What can I do with these? :P

  41. Patrick says:

    I ordered mine, shipping to the US of A for free !

  42. Martin says:

    free shipping to New Zealand

  43. GR says:

    This might be slightly offtopic, but would this be a good board to start learning to work and program micro controllers?

    I have a fairly large coding experience, both professionally and as a hobby, but never did really try to work with anything other that computers and I’m interested in learning. For 5$ shipped this seems to be cheap enough to risk buying it even if I don’t end using it for anything.

    So… opinions? worth it to learn? capable/easy enough for a couple of beginner projects so I can decide whether I like it or not?(any resources on this topic would be appreciated too)

  44. hardcore says:

    The same f***ing bullshit, you cannot order if you are in Asia.

  45. Aleksejs says:

    Successfully ordered 2 from Latvia/EU – no additional shipping costs (money already got substracted as well).
    I did not realize, I could skip Company name. Well, I put company, where I work in anyway (although they do not do anything remotely in common with electronics).

  46. spiralbrain says:

    Just ordered mine, free shipping to INDIA, for $4.99 it is a steal..

    • Sanjay says:

      Its not a steal its Highway Robbery!

      Do you know that our wonderful Customs Department insists on charging 100% Duty on import of Development Tools ?

      Which means, apart from the loss per board, TI is also paying around $40 shipping to India, plus another $10 Customs Duty.

      (posting here to raise awareness, and hopefully embarass http://www.cbec.gov.in/ into changing their policies on tools that can only help improve India’s economic condition.)

  47. SpydaMonky says:

    For some reason I just bought two! Happy to report no extra cost on shipping to South Africa.

    I used a company name that a friend and I proposed but have not done anything to start it. And its website, well that is my Hackhut page!!

    I have never used a Launch pad so this should be interesting :)

  48. jan says:

    i just got my two, dont know yet what i am going to do with it, maybe tie it up to an arduino for that extra easy of use ^^

  49. M4CGYV3R says:

    “Ah Zoidberg, at last you’re becoming a crafty consumer….I’ll take 8!”

  50. Vis1-0n says:

    Another 2 on the way to South Africa, hope they don’t ship DHL as they have some strange ideas on customs clearance PROCESSING fees.

    I hope the device can target the LM3S series as well, I can get these cheap locally. Bonus if it can target other ARM devices, I was contemplating buying a Jlink clone.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 93,778 other followers