This thing is really remarkable. It’s a beer draft system that automatically fills and distributes to your party guests. The approach is something of an industrial revolution for parties. A hopper feeds cups to the tap; once filled they are whisked off to thirsty guests using a conveyor belt system.
Many of the parts come from a washing machine that the team scrapped for the build — most notably the motor which drives the belt. But pretty much every part of it is salvaged. For instance, the conveyor belt that transports the full glasses was made from gluing sections of bicycle inner tubes together. To help ease the transfer of a cup from the filling station onto that belt a series of very long cable ties were attached to a pole. The tails from those ties act as a brush to stabilize the cup as an arm pushes it onto the conveyor. The best way to see all of this is to watch the entire clip embedded after the jump.
Continue reading “Automatic beer pourer was hacked together from a bit of everything”
[Rumplestiltskin] has had work done on his double-hung windows to help prevent drafts and keep them in good working order. But there are still a few that rattle, and let in the cold of winter. Not this year; he’s added a small feature to the jamb that will keep out the cold weather.
A pair of jointing blocks were added to each window. The small block seen above is attached to the window jam with a couple of all-purpose screws, and hosts a machine screw which points toward the window frame. Since there is weather stripping between the two window frames, and between the frame and the outer jamb, tightening this screw will snug the frames up to close any small gaps. This has the unintended consequence of prohibiting the window from being opened (unless you don’t mind scraping the paint as the machine screw slides across the wood). But if only used in the winter months this is a viable solution.