BCD watch

2 Articles

Qron0b: A Minimalist, Low-Power BCD Wristwatch

January 2, 2026 by 19 Comments

Over the decades we have seen many DIY clocks and wrist watches presented, but few are as likely to get you either drawing in the crowds, or quietly snickered at behind your back, as a binary watch of some description does. A wrist watch like [qewer]’s qron0b project which also uses BCD encoding to display the current time is among our more rare project types here, with us having to go all the way back to 2018 for a similar project as well as a BCD desk clock.

As is typical, a single CR2032 coin cell powers the entire PCB, with an ATtiny24A or compatible as the MCU, a DS1302 RTC and the requisite 4×4 LED matrix to display the hours and minutes. Technically three LEDs are unneeded here, but it looks nicely symmetrical this way, and the extra LEDs can be used for other tasks as the firmware is expanded from the current setting and reading of the time.

The AVR C firmware can be found in the above linked GitHub repository, along with the KiCad PCB project and FreeCAD design files for the watch body. The body accepts a 22 mm GT2/GT3-style watch strap to complete the assembly. With a single CR2032 you’re assured of at least a few months of runtime.

A BCD Wristwatch You’d Want To Wear

July 24, 2018 by 4 Comments

Timepieces are a staple of Hackaday, we have featured so many of them over the years that for us to become really excited by a fresh one it must be particularly special. The days when simply breaking out the Nixies was enough are long past.

So this binary wristwatch project by [Sverd Industries] definitely caught our eye. Not for being particularly novel, after all binary LED clocks are not in themselves hard, but for the exceptionally high quality of its construction. It’s a simple enough design, with a real-time clock chip and an ATmega328 in its most power-sipping mode on a circular PCB with an array of LEDs as the display, and all contained within a 3D-printed shell.

This design has real quality, the discrete components are tucked underneath the board leaving the  ICs on the top with only the LEDs for company. The glass front is glued into place, and the shell is professionally 3D-printed. Power comes from a single CR2032, and to save battery life the LEDs are only activated by the press of a concealed button. We would wear this watch. For that matter, you would wear this watch. Take a look at the video below the break, and we’re sure you’ll agree. Looks like a few are even available over on Tindie.

This isn’t the first binary watch we’ve featured, so it’s tough to pick a comparison. This very low BoM example might lack some of the polish of the one presented here, but it has the same ability to catch our eye.

Continue reading “A BCD Wristwatch You’d Want To Wear” →