With Elliot off on vacation, Tom and Dan made a valiant effort to avoid the dreaded “clip show” and provide you with the tastiest hacker treats of the week. Did they succeed? That’s not for us to say, but if you’re interested in things like non-emulated N64 games and unnecessarily cool filament sensors, this just might be one to check out.

We also came across a noise suppressor for a leaf blower, giant antennae dangling from government helicopters, and a desktop-friendly wire EDM setup that just might change the face of machining. We waxed on about the difference between AI-generated code and just pulling routines from StackExchange, came to the conclusion that single-stage-to-orbit is basically just science fiction, and took a look at the latest eclipse from 80,000 feet, albeit a month after the fact.

Worried about attracting the Black Helicopters? Download the DRM-free MP3 and listen offline, just in case.

Continue reading “Hackaday Podcast Episode 272: Desktop EDM, Silence Of The Leaves, And The Tyranny Of The Rocket Equation” →

What did Hackaday Editors Elliot Williams and Al Williams find interesting on Hackaday this week? Well, honestly, all the posts, but they had to pick some to share with you in the podcast below. There’s news about SuperCon 2024, and failing insulin pumps. After a mystery sound, the guys jump into reverbing garden hoses, Z80s, and even ribbon cable repair.

Adaptive tech was big this week, with a braille reader for smartphones and an assistive knife handle. The quick hacks ranged from a typewriter that writes on toast to a professional-looking but homemade ham radio transceiver.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download a file chock full of podcast here.

Continue reading “Hackaday Podcast Episode 271: Audio Delay In A Hose, Ribbon Cable Repair, And DIY Hacker Metrology” →

Join Hackaday Editors Elliot Williams and Tom Nardi as they get excited over the pocket-sized possibilities of the recently announced 2024 Business Card Challenge, and once again discuss their picks for the most interesting stories and hacks from the last week. There’s cheap microcontrollers in highly parallel applications, a library that can easily unlock the world of Bluetooth input devices in your next project, some gorgeous custom flight simulator buttons that would class up any front panel, and an incredible behind the scenes look at how a New Space company designs a rocket engine from the ground up.

Stick around to hear about the latest 3D printed gadget that all the cool kids are fidgeting around with, a brain-computer interface development board for the Arduino, and a WWII-era lesson on how NOT to use hand tools. Finally, learn how veteran Hackaday writer Dan Maloney might have inadvertently kicked off a community effort to digitize rare documentation for NASA’s Voyager spacecraft.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download your very own copy of the podcast right about here.

Continue reading “Hackaday Podcast Episode 270: A Cluster Of Microcontrollers, A Rocket Engine From Scratch, And A Look Inside Voyager” →

This week, it was Kristina’s turn in the hot seat with Editor-in-Chief Elliot Williams. First up in the news — the results are in for the 2024 Home Sweet Home Automation contest! First and second place went to some really gnarly, well-documented hacks, and third went to the cutest pill-dispensing robot you’ll probably see before you hit the retirement home. Which was your favorite? Let us know in the comments.

Then it’s on to What’s That Sound. Kristina failed once again, but you will probably fare differently. Can you get it? Can you figure it out? Can you guess what’s making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.

Then it’s on to the hacks, beginning with a DIY cell phone sniffer and a pen that changed the world. Then we talk bullet time on a budget, the beautiful marriage of 3D printing and LEGO, and, oh yes, flexure whegs. Finally, we get the lowdown on extender probes, and posit why it’s hard to set up time zones on the Moon, relatively speaking.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and savor at your leisure.

Continue reading “Hackaday Podcast Episode 269: 3D Printed Flexure Whegs, El Cheapo Bullet Time, And A DIY Cell Phone Sniffer” →

Elliot and Dan got together to enshrine the week’s hacks in podcast form, and to commiserate about their respective moms, each of whom recently fell victim to phishing attacks. It’s not easy being ad hoc tech support sometimes, and as Elliot says, when someone is on the phone telling you that you’ve been hacked, he’s the hacker. Moving on to the hacks, we took a look at a hacking roadmap for a cheap ham radio, felt the burn of AM broadcasts, and learned how to program old-school EPROMs on the cheap.

We talked about why having a smart TV in your house might not be so smart, especially for Windows users, and were properly shocked by just how bad wireless charging really is. Also, cheap wind turbines turn out to be terrible, barnacles might give a clue to the whereabouts of MH370, and infosec can really make use of cheap microcontrollers.

Grab a copy for yourself if you want to listen offline.

Continue reading “Hackaday Podcast Episode 268: RF Burns, Wireless Charging Sucks, And Barnacles Grow On Flaperons” →

What were some of the best posts on Hackaday last week? Elliot Williams and Al Williams decided there were too many to choose from, but they did take a sampling of the ones that caught their attention. This week’s picks were an eclectic mix of everything from metal casting and plasma cutters to radio astronomy and space telescope budgets. In between? Some basic circuit design, 3D printing, games, dogs, and software tools. Sound confusing? It won’t be, after you listen to this week’s podcast.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download an audiophile-quality oxygen-free MP3 file here.

Continue reading “Hackaday Podcast Episode 267: Metal Casting, Plasma Cutting, And A Spicy 555” →