Dead NES Controller Used As A Makey Makey Shield

November 22, 2012 by Mike Szczys 9 Comments

[Guillermo Amaral’s] NES controller was in great shape. Well, except for the fact that it didn’t work. Upon closer inspection it seems the shift register — which is the only IC on these ancient peripherals — had given up the ghost. But he made it usable again by making the NES controller into a MaKey MaKey shield.

You should remember the MaKey MaKey. It’s a little board that lets you create controllers out of just about anything — bananas being one of the more popular examples. All he needed to do is wire up the controller’s buttons to the board. For the task he chose to use extra long pin headers. To find the location for holes in the case he applied red ink to the top of each pin, then held the PCB up to the outside of the controller. After drilling at each red mark he glued the pin headers in place and started in on the controller’s original circuit board. Once all the point-to-point wiring was done he had a working controller. See for yourself in the clip after the jump.

Continue reading “Dead NES Controller Used As A Makey Makey Shield” →

Toorcamp: Banana Piano

August 14, 2012 by Eric Evenchick 3 Comments

[Michael] built his own clone of the popular MaKey MaKey Kickstarter project. His implementation uses an ATMega328 and the V-USB stack to connect as a USB Human Interface Device. He was showing it off at Toorcamp wired up to a banana piano, which captured the interest of kids and adults alike.

The digital inputs are pulled to ground with a large (10 Mohm) resistance. The user holds a supply voltage in one hand and completes the circuit by touching a conductive object like a banana, which is connected to a digital input of the ATMega328. Since the internal resistance across your body is typically around 1 Mohm, this pulls the input high and corresponds to a key being pressed on a normal keyboard.

We featured banana pianos before, and it’s a great demo of the interfaces that can be built with this project. This implementation is very simple, and works well if your internal resistance is low enough. [Michael] taught a workshop at Toorcamp to show people how to build their own. He has found that the ‘magic’ of playing music with bananas is a great way to get children interested in electronics.

Review And A Build: Makey Makey, A Banana Piano, And Mario

May 25, 2012 by Brian Benchoff 14 Comments

We’ve been getting a lot of emails on the Hackaday tip line about the Makey Makey. This business-card sized circuit board turns everything – bananas, Play-Doh, water, and people – into a touch interface.

There have been a ton of blogs that have written about the Makey Makey Kickstarter and debut at the Bay Area Maker Faire, but Hackaday has been mum on the pending release of the Makey Makey. There’s a reason for that: [Jay] and [Eric], the MIT Media Lab rats who came up with the Makey Makey, offered to send a demo board out to somebody at Hackaday. Well, here’s the review of all the cool stuff you can make with the Makey Makey.

Continue reading “Review And A Build: Makey Makey, A Banana Piano, And Mario” →

Hackaday Links: May 21, 2012

May 21, 2012 by Brian Benchoff 12 Comments

Turning anything into a touch sensor

Makey Makey is a small board with a USB plug and bunch of contact points for alligator clips. Plug the Makey into your computer and attach just about anything to the contacts, and you can make anything into a video game controller, a keyboard, a piano, or pretty much anything you can imagine. If [Sprite_tm] copied it, you know it has to be cool.

RepRaps will finally cost a million dollars

The Pentagon is throwing money at 3D printers. It’s “only” $60 Million the DoD is putting into 3d printer research, but hopefully our most brilliant researchers will help refine some of the ‘unsolved problems’ – like metal and circuit printing – the 3D printer community is facing.

Getting started with FPGAs

[Tim] found a neat little $40 FPGA board aimed right at the hobby hacker. The good news: It’s compatible with Arduino shields, and it’s very cheap. The bad news: it only has 1280 logic cells, so you probably won’t be emulating CPUs on this thing. If anyone has a teardown / project with this board, send it in.

Improving a Bluetooth dongle with a bit of wire

Unsurprisingly, the extremely cheap Bluetooth dongle [Mike] bought on eBay didn’t have great reception or range. No problem, because you can just replace the internal antenna with a piece of wire cut to length. Now bluetooth devices are recognized instantly, and there are no Bluetooth ‘dead spots’ around [Mike]’s computer.

Come to France, make stuff

The Toulouse Hackerspace is having a little shindig this coming weekend (May 25-27) featuring a conference, workshop, concerts and performances. If you’re in the area, drop on by,