Mrs. Penny’s Driving School — Hardware Workshop In Dallas

In case you haven’t noticed, the Hackaday community is making more of an effort to be a community AFK. We’re at VCF East this weekend, have the Hackaday World Create Day quickly approaching, Hackaday | Belgrade a few days ago, and Hackaday Toronto next week just to name a few in close proximity to this post.

As promised, or threatened, depending on which end of the stick you’re on I will be teaching an electronics class at the Dallas Makerspace every 3rd Saturday of the month. The goal of these classes is to help you overcome the barrier between a hardware idea and having that hardware in your hand. I’m not an expert in PCB design or layout, but I’ve found more ways to do it wrong than I’d probably admit too and this is my way of sharing what I’ve painfully learned through trial and error. At the time of writing this article there are still a few spots available in the first class, follow the above link for tickets.

Images of my failed hopes and dreams wonderfully captured courtesy of [Krissy Heishman]

Class 1

In our first 6 hour session we’ll take a basic, high-level idea and work our way down. For example: our first project will be an AVR development board. This is something common enough that everyone will know what it is (an Arduino is an AVR development board, just in case my mom is reading this). We won’t be making an Arduino clone part-for-part but taking the Arduino idea and making it our own custom board. Maybe we add some terminal blocks instead of DuPont headers or perhaps we want a real time clock and a slide potentiometer on the board. We can do that if we want, you can’t stop us.

So class number 1 is a crash course in Eagle schematic capture and PCB layout. Since this is only 6 hours worth of class time and we need to have boards and parts ordered when we leave we won’t be getting too complicated with our design.

Class 2

By the time we meet for our second session we should have taken delivery of our shiny new PCBs and our parts order should have long since been delivered from the distributor (Mouser is more or less an hour drive from the Dallas Makerspace, not that we’ll pick the parts up at will-call for this project, but it’s nice to have the option). We will spend the second 6 hour session assembling and testing our boards. If we need to make changes to our boards we can talk about that as a part of the design process. Depending on how long assembly takes we can brainstorm some ideas for the next round of Mrs. Penny’s Driving School classes which will continue the following 3rd Saturday of the month.

8 thoughts on “Mrs. Penny’s Driving School — Hardware Workshop In Dallas

      1. In the third paragraph, it says you are adding a real-time clock and a slide pot. In the fourth paragraph, it says you are ready for schematic capture and board layout. Not one word about any testing of any kind. I sure wish every schematic I drew worked first time with no flaws.

    1. oshpark has made churning out pcbs so cheap, I often just skip the breadboarding step and roll a pcb. sure it may have a mistake or two, but it takes much less time to solder on a jumper wire than wiring an entire board. also more often than not newer interesting chips only come in SMD packages, so if you’re going to already be rolling a breakout board… might as well just roll the whole thing :D

  1. Personally, I think this is an awesome idea, and would definitely be in attendance if I were not in the middle of dissertation writing. Kudos to Brandon for putting it together, and for Dallas Makerspace for hosting it.

Leave a Reply to NeuntoterCancel reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.