Halloween Hacks: The Headless Dogman

November 1, 2011 by Mike Nathan 4 Comments

Halloween Hacks Banner

headless_horseman_dog_costume

Typically, when people hear that you’ve made a Halloween costume for your dog, the statement is met with the eye rolling and polite lies about how cute the outfit is. There are few exceptions to this rule, and [Dino’s] latest creation is one of them. For this week’s entry in his Hack a Week series, he created a “Headless Horseman” costume for his dog [Sophie].

The costume borrows parts from one of his previous hacks, the Hexababy. Reclaiming the dismembered head from the disturbing crawler, [Dino] reattaches it to the doll’s body, just not in the traditional manner. He screws the baby’s head to the arm of the doll after fashioning its outfit from some scrap cloth. The doll’s head retains it’s beady red LED eyes from the previous project, but [Dino] added a tilt switch to the setup so that they light up sporadically as the dog runs about.

Be sure to check out the video below to see the final result of [Dino’s] work. The doll looks great, though it seems that its saddle needs some reinforcement to handle [Sophie’s] bountiful energy stores.

Continue reading “Halloween Hacks: The Headless Dogman” →

Skeleton Does A Looney Tunes Style Song And Dance

November 1, 2011 by Mike Szczys 4 Comments

[Kevin Harrington] throws a curve ball with this skeleton in a coffin. Instead of going for the cheap scare, he conjures memories of old cartoons when the bony figure puts on a song and dance. When activated it leans forward to hang out of the coffin donning a tattered tuxedo and top hat. You can hear the servos working as they give jerky yet realistic motion to the tune “Hello! Ma Baby” in the true Michigan J. Frog style. Classic!

He figures it took about $36 in parts to put the skeleton together plus the DyIO module to control it from a PC. Four servos are used in total, connected to the skeleton with some steel cable. Connecting it via a computer makes it a bit easier to synchronize music with motion than just using a microcontroller capable of playing back audio would have been. Code is available from the site linked at the top, and a demo video is embedded after the break.

This would also have been possible by using an Arduino as a DMX controller.

Continue reading “Skeleton Does A Looney Tunes Style Song And Dance” →

Halloween Hacks: A Radioactive Display With More Trick Than Treat

November 1, 2011 by Mike Nathan 11 Comments

Halloween Hacks Banner

radioactive_barrel_display

[Shawn] was looking for a way to shake up his decorations this Halloween and decided to build a new prop for his front yard. He had a pair of old oil barrels in his garage and thought they would look great with a little bit of work.

He bolted the pair of barrels together, then slapped a fresh coat of black paint on them before adding a bright yellow radiation trefoil to each one. One barrel contains a pneumatic piston that opens the lid, revealing a light up pumpkin, a fog machine, and a set of water nozzles that spray the area. The second drum houses an air compressor, a wireless router, and an IP camera for recording the action. A web-enabled Arduino triggers the lid and sprayer, both of which can be controlled from the comfort of his house.

We think it’s a creative use of some old scrap barrels, but we’re hoping he doesn’t plan on wetting trick-or-treaters that pass through, as it seems like a good way to get your house egged or otherwise vandalized on Halloween. If the water sprayer were perhaps swapped out with some other cool effects, [Shawn] is far less likely to be the target of some angry, wet teenagers.

Be sure to check out the video below to see the display in action.

Continue reading “Halloween Hacks: A Radioactive Display With More Trick Than Treat” →

Looking Toward Christmas Decor By Learning About DMX

November 1, 2011 by Mike Szczys 8 Comments

So Halloween finally arrived, we hope you had enough time to pull off your frightening feats in the way you had originally envisioned. Now it’s time again to look to the future and start planning this year’s Christmas decorations. Lights are always a popular theme, and this year you might want to look into DMX lighting controls and decide if that’s a route you want to take. [Akiba] has your back, he just put together a set of videos explaining the DMX lighting protocol and how to use it with an Arduino.

The thought here is that the Arduino can be used as a sort of DMX hub that is connected directly to a computer running open source controller hardware. It can send commands which the Arduino decodes, deciding whether to just pass them on to DMX compatible devices, or to do what it does best and control other hardware that is not normally accessible through the lighting command protocol. To the control program your four-dollar strand of LED lights looks no different from a thousand dollar stage light, making it cheap and easy to build your own entertaining holiday show right in your front yard. See the second video in this series after the break where [Akibo] details the hardware setup for his system. The other parts are available at the link above.

Be careful, this can be a consuming endeavor. Don’t believe us? Just look around and you’ll find no shortage of large DMX builds just for Christmas lights.

Continue reading “Looking Toward Christmas Decor By Learning About DMX” →

Color Organ Tiki-o’-lantern

October 31, 2011 by Brian Benchoff 7 Comments

The Halloween parties this weekend are over, but that doesn’t mean there’s not time for a few more to finish a build before children start knocking on doors tonight. [formori] at Lakehead University wanted to do something spectacular for a pumpkin carving contest, so he and a few other EE students came up with a tiki-o’-lantern with music.

The guys at Lakehead figured a color organ flashing LEDs in the eyes and mouth of the tiki would be a very good and easy project. The circuit they used is a simple Op-amp setup like one we’ve seen earlier. The entire pumpkin is powered by a 9 V battery and the music is played with an iPod. There are two colors of LEDs – high frequencies flash a blue LED in the eyes and low frequencies flash a red LED in the mouth.

Aside from the added A/V stuff, [formori]’s pumpkin is one of the best we’ve seen on Hack a Day this year. Check out the Youtube of 1st place winner of the Lakehead pumpkin carving contest after the break.

Continue reading “Color Organ Tiki-o’-lantern” →

Halloween Hacks: Larger Than Life Costume Made From An Inflatable Lawn Ornament

October 29, 2011 by Mike Nathan 27 Comments

inflatable_stay_puft_costume

[Brian] was trying to decide on a Halloween costume this year, and while looking through his lawn decorations, inspiration struck. In his collection he had a 9 foot tall inflatable Stay Puft Marshmallow Man, and being a guy who likes to go big or go home, he knew he had to find a way to wear it.

The first task he had to tackle was ensuring that he could keep the display inflated while on the go. He was dismayed to see that the fan’s power supply was rated for 12v AC, but when he hooked it up to a DC power supply it worked just fine. While he had his speculations, he wasn’t 100% sure why it worked but he went with it anyway, connecting it up to a battery that would keep the costume inflated throughout the duration of a party.

With that out of the way, he focused more on the mobility of the costume, adding a clear window to allow him to see, along with tweaking a few other small items.

The costume looks great, and we’re sure that [Brian] is yet again the hit of the party.

Halloween Hacks: Arc Reactor Costume

October 28, 2011 by Brian Benchoff 4 Comments

Halloween is the time of year where you can dress up as a pirate, muppet, or superhero and no one will bat an eye. During this holiday of expanded social permissiveness, [Nbitwonder] decided that building an Arc Reactor from Iron Man would be appreciated by his engineering cohort.

The ‘body’ of the reactor was manufactured on the RepRap Mendel we covered from beginning to end. A few minutes with Google Sketchup was all that was needed to generate the files and send them to the printer. In a few short hours, [Nbitwonder] had the body of his Arc Reactor.

The board design was thrown together in Eagle and etched. 11 blue SMD LEDs were thrown into the mix along with some borrowed resistors. Pieces of a hard drive spindle and a little bit of wire rounded out the parts list, and everything was assembled with the DIYers favorite tool, the hot glue gun. Not a bad job for a few hours of work.

The files for the Arc Reactor are up on Thingiverse along with a Flickr photoset.