Socks By Bob

No, this article is not about SOCKS4 or SOCKS5 or Proxies. It’s about real socks, the ones that go onto your feet. Meet [Bob Rutherford], 88 years old, who lives in Saskatoon, Canada. He and his gang ([Glynn Sully], 92 years old , [George Slater] 85 year old, and young [Barney Sullivan] 65 years old) have made 10,000 socks for shelters in the community and across the country. That’s almost 8 miles of socks. Last year alone “operation Socks by Bob” as he likes to call it, produced 2,000 socks.

So how did these 4 fellows manage to pull this off? Turns out that [Bob] has a bit of a maker spirit in him and he actually built a fast, cheap, knitting machine for the purpose of making socks. Using a sewer tubing as a base, the machines can knit at 90 stitches a second.

He made it a while back but it didn’t have much of a use in mind for it. Sadly, seven years ago his wife passed away, leaving him facing a void in his life. Following his son advice “If you want to help yourself, help somebody else”, he decided to start this project.

“There’s a lot of us, as we grow older, we sit at home and look at the wall with nothing to do! Socks by Bob has given me that something to do.” [Bob]

Nowadays the gang has 2 machines working steadily and, once a week, they cut the long tubes of wool into socks. Half the yarn is donated, the other plus shipping costs are raised by [Bob’s] son. The knitting machines look pretty awesome in action. See for yourself in the video below.

Continue reading “Socks By Bob”

Hackaday Prize Entry: Circular Knitting Machines

Deep in the recesses of a few enterprising hackerspaces, you’ll find old electronic knitting machines modified for use with modern computers. They’re cool, and you can knit colorful designs, but all of these machines are ultimately based on old equipment, and you’ll have a hard time building one for yourself.

For their entry to the Hackaday Prize, [Mar] and [Varvara] is building a knitting machine from scratch. Not only is it a 3D printed knitting machine anyone can build given enough time and plastic, but this machine is a circular knitting machine, something no commercial offering has yet managed.

We saw [Mar] and [Varvara]’s Circular Knitic last January, but this project has quite the pedigree. They originally started on their quest for a modern knitting machine by giving a new brain to old Brother machines. This was an incredible advancement compared to earlier Brother knitting machine hacks; before, everyone was emulating a floppy drive on a computer to push data to the machine. The original Knitic build did away with the old electronics completely, replacing it with a homebrew Arduino shield.

While the Circular Knitic isn’t completely 3D printed, you can make one in just about any reasonably equipped shop. It’s a great example of a project that’s complex and can be replicated by just about anyone, and a perfect example of a project for The Hackaday Prize.

Check out the video of the Circular Knitic below.

The 2015 Hackaday Prize is sponsored by:

Continue reading “Hackaday Prize Entry: Circular Knitting Machines”

Knitting In The Round

There have been a few posts on Hackaday over the years involving knitting, either by modifying an old Brother knitting machine to incorporate modern hardware, or by building a 3D printed knitting machine. All of these hacks are examples of flat knitting, and are incapable of making a seamless tube. Circular Knitic bucks that trend by using 3D printing and laser cutters to create an open source circular knitting machine.

Circular Knitic is an expansion on an earlier build that gave a new brain to old Brother knitting machines from the 70s. This build goes well beyond simple manipulation of electrons and presents an entire knitting machine specifically designed for circular knitting. It’s completely automated, so once the machine is set up, a giant tube of knit yarn is automagically created without any human intervention.

This isn’t the first completely open source knitting machine; OpenKnit can be made with aluminum extrusion, some electronics, and a few 3D printed parts. Circular Knitic is, however, the first circular knitting machine we’ve seen, and according to the Github is completely open source.

The creators of Circular Knitic, [Varvara] and [Mar] have been showing off their machine at an exhibition in Zaragoza, Spain called DOERS, where they’ll be knitting for the better part of six months. You can see some video of that below.

Continue reading “Knitting In The Round”