Hacklet 51 – Crowdfunding Projects

June 12, 2015 by Adam Fabio 6 Comments

Ah crowdfunding. You might say we have a love/hate relationship with it here at Hackaday. We’ve seen some great projects funded through sites like Kickstarter, IndieGoGo, and the like. We’ve also seen projects where the creators were promising more than they could deliver. While the missed deliveries and outright scams do get a lot of press, we believe that crowdfunding in general is a viable platform for getting a project funded.

Closer to home, Hackaday.io hosts thousands of projects. It’s no surprise that some of these have had crowdfunding campaigns. This week’s Hacklet focuses on those projects which have taken the leap into the crowdfunding arena.

We start with [Louis Beaudoin] and SmartMatrix. [Louis] has created an awesome Teensy 3.1 based system for displaying images, animated graphics, and random patterns on a 32×32 RGB LED panel. The LED panel is the same type used in commercial LED billboards. SmartMatrix is open source, and includes extra pins for hacking. Our own [Mike Szczys] hacked the SmartMatrix to create a 1-pixel PacMan clone. [Louis’] Kickstarter is almost over, and needs a huge boost for fully-assembled SmartMatrix to make its goal. Even if the campaign isn’t successful, we think its a great project and you can always get a solder-it-yourself kit from The Hackaday Store!

Next up is [Michael R Colton] with PortableSDR. PortableSDR was one of the five finalists in The 2014 Hackaday Prize. This pocket-sized software defined radio transceiver started as a ham radio project: a radio system which would be easy for hams to take with them on backpacking trips. It’s grown into so much more now, with software defined radio reception and transmission, vector network analysis, antenna analysis, GPS, and a host of other features. [Michael] raised a whopping $66,197 in his Kickstarter campaign, and he’s already delivered the hand assembled prototypes to their respective backers! Even the lower level rewards are awesome – [Michael’s] PSDR key chains are actually PCBs which can be turned into maple compatible ARM devboards with just about $10 of additional parts.

Next we have The ChipWhisperer, [Colin Flynn’s] embedded security testing system, which won second place in the 2014 Hackaday Prize. We’ve covered both [Colin] and the ChipWhisperer several times on the Blog. You can always buy the full ChipWhisperer from [Colin’s] company, NewAE Technology Inc. At $1500 USD, the ChipWhisperer is incredibly affordable for a hardware security tool. That price is still a bit high for the average hacker though. [Colin] created a Kickstarter campaign for a light version of the ChipWhisperer. This version is a great platform for learning hardware security, as well as an instrument for testing embedded systems. The campaign was a huge success, raising $72,079.

Not every crowdfunding project has to be a massive megabuck effort though. [ZeptoBit] just wanted to solve a problem, he needed a WiFi shield for Arduino using an ESP8266 module. ESP8266 WiFi modules have been all the rage for months now, but they can be a bit of a pain to wire up to an Arduino Uno. The dual row .100 headers are not bread board friendly. The ESP8266’s 3.3 V power and interface requirements mean that a regulator and level shifters are needed to get the two boards working together. [ZeptoBit] put all that and more on his wingboard. It worked so well that he launched a Kickstarter campaign for a small run of boards – his initial goal was kr3,500, or $425 USD. He ended up raising kr13,705, or $1665 USD. Not bad at all for a hobby project!

If this isn’t enough crowdfunding goodness for you, check out our Crowdfunding list! That’s it for this week’s Hacklet, As always, see you next week. Same hack time, same hack channel, bringing you the best of Hackaday.io!

Surviving The Hackaday Prize Party

November 14, 2014 by Mike Szczys 19 Comments

What a week it has been. I’m in Munich, Germany along with [Brian], [Jasmine], [Ben], [Alek], and the rest of the crew who helped plan and guide the 2014 Hackaday Prize. If you somehow missed it, we announce the rank order of the finalists. It was SatNOGS that claimed the Grand Prize, congratulations!

We have a ton of content headed your way, but to be honest there’s going to be a bit of “recovery lag” before that hits the front page. We spent the entire day at Technikum in the Munich Kalturfabrik. It was originally some sort of factory complex (having to do with potato processing) which has since been turned into co-working spaces, restaurants, and performing arts venues. We felt right at home in the post-industrial, brightly muraled maze of buildings.

The official activities started with the Embedded Hardware Workshops which were packed! The previously assured “robust” WiFi immediately, and repeatedly, went down. Fortunately hackers being hackers everyone pooled their local copies onto one SD card and passed it around. We’ve segregated that piece of hardware in an evidence bag for future testing.

We pushed back the closing of the workshops by about 40 minutes since everyone was having fun. This marginally outraged the company who was handling furniture and food as we weren’t following the plan. They were pleasant enough about the issue but for me it was an interesting peek at the difference in cultures. During the switch we had lightning talks which I found both enthusiastic and interesting. We then moved to the major presentations of the night. [Jeroen Domburg] aka [Sprite_TM] gave a stunning presentation about reverse engineering the ridiculously overpowered microcontroller on a special lighted keyboard. We’ll surely have a standalone post about it. We then closed with a recap of The Hackaday Prize and the naming of the winners. That too will have its own feature.

After handing over the trophy, and taking a few photos the writers all rushed to the downstairs “backstage” area. I had previously written the announcement post and we spent some time getting the word out, first to all the finalists, then to the sites that are close friends, and finally started pushing the news on social media. All work and no play? Forget about it. The party was raging and the food and drinks were fantastic. They were, however, far outshined by the conversations with interesting people to be found at every turn. I spoke with people who had driven in just for the event from France, Austria, and of course all over Germany.

The venue was packed up starting around Midnight. You know it’s a great time when the crowd hangs out in the cold for another 40 minutes afterward. The point of the story? Any chance you have to spend time with the great people who make up the Hackaday community is a chance to jump at. Where to next?

SatNOGS Wins The 2014 Hackaday Prize

November 13, 2014 by Mike Szczys 86 Comments

The Grand Prize winner of the 2014 Hackaday Prize is SatNOGs. The project is a thrilling example of the benefits of a connected world. It opens up the use of satellite data to a much wider range of humanity by providing plans to build satellite tracking stations, and a protocol and framework to share the satellite data with those that cannot afford, or lack the skills to build their own tracking station. The hardware itself is based on readily available materials, commodity electronics, and just a bit of 3D printing.

The awarding of the Grand Prize caps off six-months of productive competition which started in April with a first round reaching to more than 800 entries. Once the field had been narrowed and sent on to our judges the narrowed it to just 50 projects vying for a trip into space (the grand prize), industrial-grade 3D printer and milling machine, a trip to Akihabara electronics district in Japan, and team skydiving.

Congratulations to all 5 top winners

SatNOGS – Grand Prize

You already know this but such an accomplishment is well worth mentioning again!

ChipWhisperer – Second Prize

The ChipWhisperer is a hardware security testing platform that allows developers to explore side-band and glitch vulnerabilities in their hardware projects. The existing technologies for this type of testing are prohibitively expensive for most products. The availability of this tool plays a dual role of helping to inform developers of these potential attack vectors, and allowing them to do some level of testing for them.

PortableSDR – Third Prize

The form and function of the PortableSDR move forward both Software Defined Radio and Ham. The SDR aspect fully removes the need to use a computer. The wireless functions provided can be called a modernization of portable amateur radio hardware.

Open Source Science Tricorder – Fourth Prize

Inspired by the future-tech item found in the Star Trek franchise, the Open Source Science Tricorder uses currently available technology to produce a handheld collection of sensors. The design provides modularity so that the available sensors can be customized based on need. Equally importantly, the user interface gives meaning to the data being measured, and allows it to be uploaded, graphed, and otherwise manipulated on the Internet.

ramanPi – Fifth Prize

Raman Spectroscopy is used to help determine what molucules are found in test samples. One example would be determining possible contaminants in drinking water. These tools are expensive and the ramanPi project will mean more labs (at University or otherwise) as well as citizen scientists will be able to build their own spectrometer. One particularly interesting aspect of the project is the parametric 3D printer file used for mounting the machine’s optics. The use of this technique means that the design can easily be adapted for different types of lenses.

2015 Hackaday Prize

With the great success of these five projects, and the potential that Open Design has to move the world forward, we hope to host another round of The Hackaday Prize in 2015. When you’re done congratulating the winners in the comments below, let us know what you think the subject of the next challenge should be.

Thank you to our sponsor

Hackaday would like to thank the generosity of our sponsor, Supplyframe Inc., who supported the cost of all prizes. Supplyframe is Hackaday’s parent company and their values are closely aligned with our own.