2022 Hackaday Prize: Get Your Planet-Friendly Power On!

Time flies! This weekend marks the end of the first stage of the 2022 Hackaday Prize, and your chance to enter your alternative-energy projects. There are ten $500 prizes up for grabs, and there’s still time to whip up a project page over on Hackaday.io to showcase it.

In this round, we’re looking for projects that harvest their own energy — solar, wind, heat, vibration, you name it — or projects that make it easier to collect, store, or use renewable energy. Whether this is microwatts or megawatts, the scale of the project is up to you! As long as it’s using or making it easier to use clean energy, we want to see it.

So far, we’ve seen some great projects, ranging from a optimizes the tilt angle of a home solar installation to a demonstration of using a new type of lithium-ion capacitor to add solar power to smaller projects. We really love [MartMet]’s simple Bluetooth thermometer hack, which adds a supercapacitor and solar cell to an outdoor thermometer, and then uses hacked firmware to log the charge status over a year of use! We’re suckers for good data.

The sun is not the only game in town, though. There are a surprising number of projects based on human energy production in emergency situations, from cranking to shaking. Thermionic converters were new to us, but we love explorations of fringe tech. Other traditional favorites like wind and water may make more sense for larger applications. And don’t forget how you’re going to store all this juice you’ve collected.

In short, we’ve got a bunch of great entries, but we’re still missing yours! There’s no minute like the last minute: if you’ve done some work in clean or renewable energy, set yourself up a Hackaday.io project page now. You’ll help make all our projects cleaner, and stand a good chance of taking home some real money to boot!

Once we’ve handled power, the next round is “Reuse, Recycle, Revamp” where any tech that uses recycled parts or facilitates reuse, repair, or recycling is fair game!

5 thoughts on “2022 Hackaday Prize: Get Your Planet-Friendly Power On!

    1. Spent my pandemic free time last year in the garden , set up the ham radio and raspberry pi3 to run dump 1080 flight aware and needed power , built up a solar charger and spent to much time fighting the EMI/RFI , once I get the interference out of it I will run the inside ham radio room off of solar also.
      photo test set up
      https://drive.google.com/file/d/1SuJbYcZD_b8nVVS1jaibKXptavStJ9RJ/view?usp=sharing
      photo mock up of indoor setup ( back of ham room desk )
      https://drive.google.com/file/d/1ApmNBKQMn3B5FfdgvRySO2v-n0HeSmA0/view?usp=sharing

  1. I’m wondering if I should do a write up on synchronous rectification. It will allow people to use car alternators for generation projects with a gain of 20% efficiency. Unfortunately I don’t have time for puting stuff into hardware any more.

Leave a Reply to DerAxemanCancel reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.