The Coconut Cruiser Takes Relaxing To The Next Level

March 31, 2014 by James Hobson 9 Comments

While you might not be able to tell from the picture, that outdoor love seat has wheels underneath it. And that Coconut — yeah — It controls it.

We’re starting to like this [Rodger Cleye] fellow. First he brings us the awesome [Marty Mcfly] quadcopter-hoverboard — and now this. He had originally converted his old recliner into a RC comfortable transportation chair in attempt to sell it at a garage sale, and after that decided a one-seater was just too boring. It’s much more fun to lounge with a friend while cruising down the street in your love seat.

It runs off of a 24V DC system with two 15aH SLA batteries. This gets it going to about 5mph, and the battery lasts well over 2 hours. The coconut has a straw sticking out of it which is actually the joystick — a very discrete control unit!

Still not satisfied, he decided to throw on a 25W audio system as well, so they can play their Hawaiian music while weirding out the neighbors. Take a look after the break.

Continue reading “The Coconut Cruiser Takes Relaxing To The Next Level” →

Frozen Pi — An Affordable Bullet Time Recorder

March 31, 2014 by James Hobson 31 Comments

What happens when you strap 48 Raspberry Pi cameras together with nearly half a kilometer of network cables? You get your own bullet time capture rig.

Originally inspired by the unique film effect of the Matrix and an old BBC documentary called Supernatural: The Unseen Powers of Animals, the owner of PiFace decided to try re-creating the bullet time effect himself.

To create the rig they’ve taken 48 Raspberry Pis, each with a PiFace controller board and the standard camera. The controller board allows the Raspberry Pi to be used without a keyboard or mouse, so all the network cables have to do is send a simple code to each pi in order to take the pictures. A simple laser cut wood profile is used to snap them all together into a giant ring.

While 48 Raspberry Pis is a lot, they think this is a reasonable project for a classroom environment — besides, how cool would it be to go to school and film your own bullet time stunts?

Continue reading “Frozen Pi — An Affordable Bullet Time Recorder” →

DIY Bluetooth Boombox Can Take A Beating!

March 30, 2014 by James Hobson 18 Comments

FZZ4CJXHRWNH8KT.MEDIUM

Looking for a nice portable audio solution that can take a beating outdoors? This RaveBOX (v1.0) might be what you’re looking for!

[Angelo] is a 15 year old high school student from the Philippines who loves making things — in fact, he has a collection over 40 Instructables that he’s written himself to share with the world. He wrote his first when he was only 10 years old.

He was inspired to build this boombox when he stumbled upon a Pelican-like rugged case at the mall, so he bought it and started planning the build around it. He’s using a pair of 2-channel audio amplifiers hooked up to a Bluetooth/FM/USB/SD card player module which has a nice face-plate for external mounting. It drives a 4″ woofer, and 4 full range speakers. To modify the case, he used a Dremel and pocket knife, and we must say, he did a great job! The 12V 2.2aH lithium polymer battery provides a surprising 18 hours of playback. Continue reading “DIY Bluetooth Boombox Can Take A Beating!” →

3D Printed Instrument Roundup

March 29, 2014 by James Hobson 13 Comments

3d printed instruments

We just stumbled upon a great repository of all musical things that are 3D printed. It’s a wiki dedicated to sharing and recording these 3D printed instruments to help encourage further ideas and projects.

The people maintaining the site find different projects and share them, adding descriptions which would go great into a database search. They explain the type of instrument, it’s history, a picture or video of it and the method of manufacture used to create, whether it be traditional 3D printing, laser cutting, or another process.

Some of our favorites include the 3D printed guitar bodies, the strange looking multi-horn trumpet (that’s the weird one, bottom right) by the MIT Media Lab, and of course the humongous bass recorder (top right).

Stick around after the break for a few videos of these ~~different~~ unconventional, unorthodox instruments!

Continue reading “3D Printed Instrument Roundup” →

2-Axis Solar Tracker Always Gets A Tan

March 29, 2014 by James Hobson 21 Comments

Let’s face it — solar panels still aren’t that efficient. So why not pump as much juice out of them as possible? Building a 2-axis solar tracking unit can increase daily power output by around 30%!

[Jay Doscher] had his power go out back in 2011, and even though it was only for 12 hours, they realized how ill-prepared they were to deal with a power outage. Food was spoiled, flashlights were dead, candles were sparse… they needed to be prepared better for the next time this happened. This spawned one of [Jay’s] longest running projects on his blog Polyideas.

His goal was to build a fully automated solar tracking unit that could be setup anywhere, and automatically track the sun to ensure optimum ray catching. It makes use of a 12V gear reduced motor to provide panning, and a linear actuator with positional tracking to control the tilt. To track the sun he’s got a digital compass and an Adafruit Ultimate GPS breakout board. To control it all he’s using is an Arduino UNO, but he has been through multiple iterations including his first with a BeagleBone. It’s a very slick and well engineered system and [Jay’s] hoping to spread it around the world — the entire thing is open source. What a guy!

It’s not quite complete yet, but he’s got an amazing build log and a GitHub repository filled with info — plus the following video showing it off in its current state!

Continue reading “2-Axis Solar Tracker Always Gets A Tan” →

Cheap Tire Sale Sparks Creative Contraption

March 29, 2014 by James Hobson 28 Comments

[Greg] and his kids were killing time at their (his?) favorite store — Harbor Freight. They noticed a sale on 10″ rubber tires for only $5/each… and it was all down hill from there.

He started sketching up a general idea for a three-wheeled go-kart. Once he had a reasonable idea of what it would look like, he went down to the hardware store and picked up a whole lot of 1″ PVC pipe, tees, elbows, crosses, epoxy and fasteners.

It’s a simple cart featuring a bit of a roll cage. Currently it’s just designed for being pushed around or riding down hills. It still looks like a lot of fun for the kids. We can’t help but wonder when he’s going to strap some electric motors on it to make it really fun for the kids. Maybe build a second, put some pool noodles around the frame, and bam, you’ve got a set of bumper-cars! If he needs any inspiration for the electronics, [Greg] could check out this Wireless Wii-Cart, or this over-powered-built-in-a-day-cart.

Continue reading “Cheap Tire Sale Sparks Creative Contraption” →

Successful 3D Printed Cranium Implant

March 28, 2014 by James Hobson 43 Comments

implant-1

What an age we live in. If the image above looks like the entire top of a skull — it’s because it is. Surgeons successfully replaced a 22 year old woman’s cranium with this plastic copy.

We’ve seen small 3D printed transplants before, but nothing as big as this. A 22 year old woman suffered from a very rare disorder in which her skull never stopped growing. While normal skulls are about 1.5cm thick, hers was almost 5cm thick by the time of the surgery. If they left it any longer, the continued bone growth would have eventually killed her.

Until now this surgery has required a hand-made concrete-like implant to replace the removed bone. As you can imagine, it’s hardly an ideal solution. Thanks to continually advancing 3D printing technology, surgeons at the University of Utrecht UMC were able to create an exact copy in a durable and lightweight clear plastic, which also has a better rate of brain function recovery than the old way of doing it.

The 23 hour surgery took place last December and was a huge success with the patient making a full recovery — if you’re not too squeamish around exposed brains, check out the following video. Wow.

Continue reading “Successful 3D Printed Cranium Implant” →