Remote Controlled Alarm Clock

remote alarm

Not everyone can have a cute alarm clock that runs away from you like Clocky. Most just resolve to place the clock on the other end of the room so they have to get out of bed to switch it off. That’s what [ryan] had to do to get up in the morning. He wasn’t able to set the time or confirm that the alarm was on from bed anymore so he decided to hack in an IR remote for his alarm. Ryan has written a thorough article on how he decoded the remote codes and implemented the clock control using an ATMEGA8. Now he can just key in the time he wants and the microcontroller takes care of setting it.

Continue reading “Remote Controlled Alarm Clock” →

Dualboot DVD Firmware Mod For The Xbox 360

chip select

Monday brought news of backups successfully booting on Xbox 360s with modified DVD firmware images. LittleJonny put together a tutorial on how to boot two different DVD drive firmwares. To perform this mod you need a second SST 39sf020a flashrom plus some resistors. The two flash chips are soldered directly on top of each other except for pin 15. Two wires are then attached. Which flash chip is used depends on which wire you pull to ground. Just add a switch and you can install a modified firmware on the second chip while keeping your original. I’m guessing Microsoft will put firmware detection into the dashboard to combat this, but this will keep your original firmware intact so you won’t have to reflash if something breaks.

Continue reading “Dualboot DVD Firmware Mod For The Xbox 360” →

Playstation Controller PC Card

playstation connector

[timmeh] already had a parallel port PCMCIA card when he started on this Playstation controller port card. He cracked the case to discover that the circuit board only took up about two-thirds of the case. After that it was pretty easy to fit the port onto the card and wire it up. The second slot in his laptop was non functioning from factory, so using the space wasn’t an actual loss.

Continue reading “Playstation Controller PC Card” →

Xbox 360 DVD Firmware Hack

dvd drive

Backups can now be booted on the Xbox 360 according to Xbox-scene. The firmware was released by Commodore4Eva who previously released a functional Xbox 1 firmware. It works under the same idea as the final Xbox hack: it patches the response to the media check into the DVD drive’s firmware. So the drive responds with an all-clear without even checking the DVD. This hack works on units with the Toshiba-Samsung drive. The new firmware also lets you use the drive under Windows for easy game ripping. There are some quirks to it, but it sounds like everything you need is included. It’s unfortunate that this happened before they were able to get executable code running on the machine. Now that the bootleggers have what they want I’m afraid it might take some steam out of the homebrew movement.

Continue reading “Xbox 360 DVD Firmware Hack” →

Juicebox Digital Picture Frame For Mom

picture frame

[joevennix]’s digital picture frame for Mother’s day is really an update to a previous how-to he wrote. The original shows you how to build a digital photo frame using a Juicebox media player.  His version doesn’t require the MP3 addon (it would make it easier) since he connects the SD card directly to the header. His latest features a much better case and hideaway controls. He admits that he still can’t cut a matte worth a darn.

Continue reading “Juicebox Digital Picture Frame For Mom” →

Simple RGB Flasher

rgb flasher

This project is designed to fade between seven different colors using an RGB LED. To keep things simple, Flakko decided to avoid PWM using a microcontroller. He used a binary counter to cycle through the color sequence. To do the fading between colors he added an RC filter. It’s a pretty simple device and the parts are more common than the ones in the Bit-tech article he referenced. YouTube video of the fader.

[thanks Javier Flores]

Continue reading “Simple RGB Flasher” →

Giant IPod Remote For The Visually Impaired

giant ipod remote

[Andrew Pollack]’s supersized iPod remote control isn’t the most technical hack around, but I’m sure his 87 year old father-in-law is very appreciative. He’s losing his vision rapidly and is finding it difficult to operate a tape player when listening to audiobooks. Andrew decided that the solution was to load up an iPod with a lot of books and then make a large tactile control for it. He purchased a JBL On Stage II sound dock with remote. The dock has built in speakers and keeps the iPod charged while in use. He put the remote in a larger box and connected buttons with unique shapes and high contrast colors. This makes the controls easy to remember, even if you can’t read the labels.