Generating Electricity With Swing Sets

May 11, 2012 by Caleb Kraft 7 Comments

[Guelherme Pena Costa] came up with an idea to light up a swing set using the motion of the people swinging on it to generate electricity. The goal was to get people to enjoy the playground at night and we think, this might actually be a pretty good way to achieve that. People love blink lights, especially if they are interactive.

To Light the LEd ropes, [Guelherme] has attached a gear motor to the frame of the swing set and an arm to the chain. When the swinger swings, it spins the motor generating between 6 and 10 volts at 230-400 mA. As you can see in the video below, that works fine to illuminate the LEDs, though we think a charging circuit to allow the lights to stay lit for longer would also be cool.

Project Octopus

May 10, 2012 by Caleb Kraft 10 Comments

You know who thinks building a robotic octopus is an awesome idea? EVERYONE. Apparently the idea is a solid enough idea that the European Commision has funded this project. The goal is to mimic the capabilities of the squishiest of the cephalopods in order to advance soft robotics. Or possibly to take over the world. They are hoping to have a fully capable robot octopus with no rigid structures at all.

You may be thinking that making a squirming tentacle is easy business. What they are attempting however, is the actual movement of an octopus including extension/contraction as well as grasping. This requires a complex system of control wires as well as “artificial muscular hydrostats” to allow it to do all these movements. A flexible skin covered in sensors will be added to the final design.

Extremely Detailed Light Painting Bar

May 10, 2012 by Caleb Kraft 6 Comments

[Matt Pandina] has been documenting his build of a very nice light painting bar on his G+ page. His light painting bar has 64 RGB LEDs being driven by an ATmega328P and four TLC5940 chips. He wrote his own libraries to talk to the TLC5940 as well as his own libraries to pull images off of a MicroSD card. He also wrote a cross-platform program that automatically converts a directory of pngs to something the TLC5940s expect. He says the secret to getting his24-bit color correction looking right is gamma correction. It seems that when the LEDs were run too bright, he couldn’t get the colors quite right. In case you’re curious, those images are 15 inches tall!

You can follow along through his posts as he starts with just a few LEDs and slowly updates and grows it to the impressive state it is at currently.

Cruncher: A Robotic Toy Dinosaur Dissection

May 10, 2012 by Caleb Kraft 2 Comments

When my children got these interesting and very obnoxious toy dinosaurs last year, I could barely contain my excitement. I knew that one day, they would be on my work bench giving up their secrets. Cruncher is a fairly recent addition to the robotic animal trend that we’ve been seeing the past few years. Imbued with a personality that is a mixture of T-Rex, beagle, and loudmouth jerk, he’s every kids idea of a perfect pet.

Continue reading “Cruncher: A Robotic Toy Dinosaur Dissection” →

Are Your PCBs Being Tested As Claimed?

May 10, 2012 by Caleb Kraft 45 Comments

Florin ordered some PCBs from Iteadstudio, a pcb prototyping service. As part of their service, they claim that all PCBs are tested before they are delivered. However, many have been bringing this claim into question. [Florin] found a complete lack of any markings indicating actual probes had been used on his boards. Though they claim that 100% of the boards are e-tested, they replied to his inquiry somewhat cryptically.

All of the pcb’s have a stripe on the edge,it does not mean they have all been electrically tested ,it is the same as outline .

People on the Dangerous Prototypes Forum have been finding similar results. The company has commented, on this page, that that they will be responding to this soon (back in February)

[Phil Torrone] Interviews [Bunnie Huang] About Chumby And More

May 9, 2012 by Caleb Kraft 3 Comments

Over at Make, [Phil Torrone] has done an interview with [Bunnie Huang]. [Bunnie] has been a major contributor to the pages of Hackaday as far back as we can remember. He started in 2002 hacking X-boxes and sharing his findings with the world. It is this sharing that makes [Bunnie] stand out. He has always shared all his findings and pushed for open source wherever it would fit. We recently discussed how Chumby, a project to which [Bunnie] contributed is coming to an end. In this interview, he talks about what the future holds for himself and how he plans to spend his time. Most interestingly, he plans on spending a year just building things he’s wanted to see built. Be sure to check out the interview to see what he’s already accomplished.

Making Laser Adjustments With An SNES Gamepad

May 8, 2012 by Caleb Kraft 21 Comments

Gaming has infiltrated everything around us. It seems that any time a control interface is needed, the first thought to many current hacker’s minds are the familiar controls from the video games we grew up with. In this example, [eljaywasi] needed a way to control the wavelength of light coming out of a laser. We don’t know exactly how he’s actually changing the wavelength, but we do know he’s using an SNES gamepad as his interface. You can see a red and a blue LED located on the front of the pad, so it may be that two buttons would have sufficed. We don’t care, we like the SNES pad better.