Hot Wheels Toy Turned Radar Gun

August 18, 2014 by Matt Terndrup 42 Comments

Yl3jKbSculaOIdoE

[Ken] was strolling through a department store one day looking for a gift for his daughter when he stumbled across a Mattel’s Hot Wheels Radar Gun for $30. He purchased it, took it home, and tested it out. Surprisingly, the device had the ability to not only scan toy cars, but also regular size vehicles, spinning bicycle wheels, and joggers as well. As his mind began to churn coming up with new ideas, he purchased another toy and repackaged it creating a more professional grade DIY radar speed detector.

The process was pretty simple. First, he disassembled the device getting to the Doppler radar system inside, which was similar to the professional radar guns that police officers used. This toy was able to transmit a continuous wave at 10.525GHz, measuring the returning frequency of returning waves that bounced off of moving objects. However, the detection range of this toy was severely limited. [Ken] then upgraded the antenna housing unit with a 3″ diameter acrylic document tube, making the quality look a lot better. After that, the system was attached to a tripod allowing for the device to be easily transported and setup near a busy traffic road, quietly watching the speed of cars driving by.

Continue reading “Hot Wheels Toy Turned Radar Gun” →

The Numitron Geekwatch

August 18, 2014 by Matt Terndrup 18 Comments

numitron_uhr_gehause_i

[Johannes] wanted to develop an unusual way to display time on a custom wristwatch. LED’s were too common, and mechanical indicators with small engines were too expansive, but Nixie tubes were just right. His design for the Numitron Geekwatch utilized two boards that were soldered together at a right angle, with a 3D printed enclosure made of semi-transparent PLA.

Future designs of this will improve on the button functionality as well as the housing of the wristwatch to protect the fragile tubes from external forces.

After the break is a video (in German) with [Johannes] going through the steps needed to make one of these of your very own:

Continue reading “The Numitron Geekwatch” →

Hacking A Bee Hive

August 16, 2014 by Matt Terndrup 13 Comments

tumblr_inline_na763mgS0N1rnwm9n

[Marc] created a self-contained monitoring platform that enabled him to record the temperature and humidity of his bee hives.’

The health of colony can be determined based on a few factors. One is temperature which is an early indicator of whether or not the bees are about to swarm. Once temperature spikes are noticed, the bee wrangler can take the necessary steps to reduce the chance of losing the hive to a neighbor. Another indicator of bee health is humidity. If the area is too damp, it can damage the hive.

With that in mind, [Marc] developed a system to alert him via SMS or email if the sensor readings go beyond a certain range. In addition, he monitored the weight of the hive to see how much honey is inside. Frequency of the buzz was also recorded, and so was the activity of the entrance. He used an Arduino Duo and a DHT22 temperature/humidity sensor. A solar panel powered the bee monitoring system.

There were some challenges that needed to be overcome. Initially the Arduino wasn’t sending out data, but that was fixed with a simple debugging session. From there, he was able to broadcast the information creating graphs with the data. Battery levels, temperature, and humidity were all recorded. With the bee hive hacked and monitored, [Marc] was able to make progress on his system making great use of an Arduino.

Makerspace Tours: HexLab In Tarzana, California

August 16, 2014 by Matt Terndrup 7 Comments

This time around, we dive into the world of 3D printing and laser cutting at a local community-driven space near Van Nuys, California. We were invited to visit HexLab Makerspace by [Jonathan] and [Mike] who own and run the company. They showed us the large selection of resources that they have made available to the public. This includes a variety of 3D printers, laser cutters, industrial sewing machines, 3D scanners, computer workstations, wood working tools, manual metal lathes, heaps of testing equipment, a leather embossing/hot stamping machine, and even a plastic injecting machine. And yes, they have a ventilator too.

With all this equipment, HexLab has the ability to prototype practically anything that floats into the mind of someone walking in the door. Specialties include paper craft, costume tailoring, laser etching wood products, manufacturing acrylic glass objects, and much more.

What makes this place different from a lot of other makerspaces is the history of the company. Originally, they started as a Research and Design firm about 14 years ago and have recently opened up the doors to the outside community. Because they began as a business that was previously similar to a hackerspace, they had already acquired the necessary tools for the space. The change makes the tools accessible to entrepreneurs, artists, designers, and musicians alike. This has bred a fantastic teaching environment where the community helps each other through the learning process.

In the future, HexLab plans to continue hosting classes and has even hinted at an up-coming mobile project that is certain to spark a local and portable maker movement. Eventually, they would like to help develop a sustainable model that can be given out to other makerspaces in an effort to assist in the creation of additional places like this. In the meantime though, we look forward to seeing how the community grows through them, and what types of amazing products with be produced out of their space.

A Raspberry Pi Helmet Cam With GPS Logging

August 14, 2014 by Matt Terndrup 9 Comments

20140126_222809-1 Over the last 20 years, [Martin] has been recording snowboarding runs with a standard helmet cam. It was good but he felt like he could improve upon the design by building his own version and logging additional data values like speed, temperature, altitude, and GPS. In the video shown after the break, a first person perspective is displayed with a GPS overlay documenting the paths that were taken through the snow. [Martin] accomplished this by using a python module called picamera to start the video capture and writing the location to a data file. He then modified the program to read the current frame number and sync GPS points to an exact position in the video. MEncoder is used to join the images together into one media file.

The original design was based on the Raspberry Pi GPS Car Dash Cam [Martin] developed a few months earlier. The code in this helmet cam utilizes many of the same functions surrounding the gathering of GPS data points, recording video, and generating the overlay. What made this project different though were the challenges involved. For example, a camera inside a car rarely has to deal with extreme drops in temperature or the wet weather conditions of a snowy mountain. The outside of the vehicle may get battered from the snow, but the camera remains relatively safe from exposure. In order to test the Raspberry Pi before venturing into the cold, [Martin] stuck the computer in the freezer to see what would happen. Luckily it worked perfectly.

Click past the break for the rest of the story.

Continue reading “A Raspberry Pi Helmet Cam With GPS Logging” →

VR Bowling Game Combines An Oculus Rift With A Wii Remote

August 13, 2014 by Matt Terndrup 5 Comments

[marclar83] was given an Oculus Rift so that he could prepare for an upcoming conference presentation. He began to download demos, getting familiar with the VR interface but was disappointed to find out that someone hadn’t developed a good virtual reality bowling experience yet. This prompted him to design a VR game that integrates a Wii Remote, recording the movements of the controller and sending accelerometer data to his computer.

The game he created is similar to Wii Sports Bowling but with the added bonus of being immersed in a virtual world with the Oculus Rift. The D-pad on the Wii Remote was programmed to switch stances and bowling methods, allowing the user to choose whether they want to throw the ball down the middle or curve it a long the way. Pressing the trigger button on the back started the swinging motion, and when released, the bowling ball shot down the alley at a high rate of speed crashing into the pins at the end.

Because the game was designed on the original DK1, the resolution of the images was a challenge that needed to be addressed, but [marclar83] solved this problem by implementing two user interfaces on the side of the screen that showed replays and depicted how many pins remained; proving to be a better experience for the gamer. This free public alpha version was made available for Windows, Mac, and Linux on the official VRBowling website. A video describing the project can be seen below. Continue reading “VR Bowling Game Combines An Oculus Rift With A Wii Remote” →

Hackerspace Tours: Pasadena City College

August 13, 2014 by Matt Terndrup 5 Comments

Pasadena City College is putting together an amazing combination of tools, education techniques, and innovative projects pinning them on the map as one of the best hackerspaces in the Southern California area. Led by [Deborah Bird], the Director of the Design Technology Pathway at PCC, and Sandy Lee the DTP Faculty Chair, this Fab Lab provides students with cutting-edge workshops and internships that will define future jobs.

We were invited to the space by Joan Horvath, the VP of Business Development over at a local 3D printing store called Deezmaker, after meeting her at an Arduino electronics class taught by a young, talented maker named [Quin]. When we arrived, we were greeted by several students who were working on a 3D printed portable map for the blind which was created for an elementary school nearby. The team behind the design attempted to step out of the visual world and into unfamiliar unsighted territory. One of the members gave us a tour of the space showing us the tools and resources they had made available to PCC students. A variety of 3D printers, ventilators, CNC machines, laser cutters, metal lathes, and even a chainsaw were found inside.

Continue reading “Hackerspace Tours: Pasadena City College” →