Cheap Electronic Dartboard Hacked To Use Android For Scoring

October 31, 2012 by Mike Szczys 4 Comments

[Dan] took a $13 electronic dartboard and made it work with an Android device. The idea behind it is that these cheap electronic models feature a very sparse display. At this price that doesn’t surprise us. He wanted to add the features you’d find on a coin-op model like the ones found in bars. So he added some hardware that lets him use Android as the scoreboard.

To do this all he needs is the ability to detect when a dart has hit the board and what value was registered. The board is really nothing more than a 62-button input device organized as an 8×8 matrix. He soldered jumpers between the pins and a DIP socket. After the work was done he programmed his Cordium BASIC microcontroller, a 28-pin chip, and dropped it right in. It communicates with a serial Bluetooth module which provides the connectivity with an Android phone. You can see a very quick clip of the app embedded after the break.

This would be just perfect if you’re using an Android set-top-box on a TV near the dart board.

Continue reading “Cheap Electronic Dartboard Hacked To Use Android For Scoring” →

Can You Believe This Portal Gun Was Built From Scratch?

October 31, 2012 by Mike Szczys 13 Comments

This Portal gun will really make [aNoodleJMC’s] costume pop this year. She actually built the video game weapon replica from scratch. It even includes some electronics to light it up blue or orange depending on which portal she’s planning to fire at an available flat surface.

There’s a lot of parts that went into the project, but by far our favorite one on the list is an acrylic toilet plunger. Its handle serves as a light pipe for the colored LEDs and can be seen above as a cloudy rod at the center of the clear barrel. A 4″ and 3″ PVC pipe helped to form the rest of the barrel, along with a 3″ clear acrylic pipe for the transparent areas. The bulbous parts of the body were sculpted from florist’s foam. Once she had all of the parts roughed out it’s obvious that [aNoodleJMC] spent a ton of time filling problem areas with Bondo, sanding everything smooth, and giving it a paint job she can be proud of. We hope she didn’t forget to include GLaDOS in the fun.

We actually just bought our Portal gun. But that’s because we had the big plans of adding the ability to levitate objects.

[vai reddit]

Fembot Costume Includes Smoking Nipples

October 31, 2012 by Mike Szczys 16 Comments

The greatest of Halloween costumes start with an idea, but they’ve also got to have strong execution to pull the whole thing off. This year [Johanna Jenkins] decided to put together a Fembot Halloween costume which is a wonderful example of this concept. Going as a Fembot from Austin Powers: International Man of Mystery sounds like a lot of fun right off the bat, but a bit of work at the sewing machine and access to a wig shop in Hollywood really brought it to the next level. But [Johanna] didn’t stop at that. The Fembots have machine guns in their bras. After they’ve torn through all of their ammo they’re left with smoking barrels as nipples, and that final touch even made it into the costume. In the video after the break you can see [Johanna] showing off the small battery operated fog system she piped into the costume bra.

Continue reading “Fembot Costume Includes Smoking Nipples” →

Nyan Cat Hat Will Be The Hit Of The Party…. For About One Minute

October 30, 2012 by Mike Szczys 26 Comments

Seriously, this Nyan Cat hat is the only part needed for a fantastic Halloween costume. It looks pretty good in this still image, but we dare you to watch the clip of it in action (embedded after the break) without letting a beaming grin creep onto your face. Everyone’s going to just love this… until it starts to get really annoying.

When switched on, the iconic meme rotates around the headgear, bobbing its head and tail as she sings the song of her people. There are also stars made of white LEDs that twinkle very brightly in the process. The presentation is quite good, but even better is seeing the build process. Luckily [Ben Katz] posted a series of detailed articles during the adventure. The mechanism responsible for driving the cat around the hat was laser cut from acrylic. It includes a large gear with teeth on the inside, which is interface by a continuously rotating servo motor with a much smaller gear. The head and tail bobbing are purely mechanical, using the revolving motion to turn a spindle as the cat makes its way around the brim.

Continue reading “Nyan Cat Hat Will Be The Hit Of The Party…. For About One Minute” →

DSO Quad Contest Has A Quartet Of Cash Prizes

October 30, 2012 by Mike Szczys 17 Comments

Seeed Studios has launched a contest centered around the DSO Quad. In case you’re unfamiliar with the hardware, the DSO Quad is a low-cost standalone oscilloscope. It’s got four channels, two of which are analog, and includes an ARM Cortex-M3 processor as well as an FPGA. Why are we recapping the hardware with the contest announcement? Because the contest rules state that you are allowed to alter the hardware despite the fact that this is more of a software-focused event.

But what you really should know about are the cash prizes going to the winners. Rank in the top four and you’ll claim $3000, $1500, $800, and $300 in cold hard cash. But even if you don’t take one of the top spots everyone still wins. That’s because all entries are open source and will be found in Seeed’s DSO Quad forums.

If judging people is more your thing Seeed needs some help with that too. They’re looking for qualified judges and application details are includes at the bottom of the contest page.

[Thanks Petteri]

Halloween Props: Monster In A Box

October 30, 2012 by Mike Szczys 2 Comments

This furry Halloween decoration proves to be a simple build, but it’s still quite popular with the little ones. [Chris] had a Halloween party for a group of 2-5 year olds and this monster that peeks out of a box was a huge hit. The trick really isn’t in the complexity of the build, but in the interactivity.

The enclosure is just a shoe box which has been covered in synthetic black fur. The lid was hinged on the back, and a hobby servo with a bit of an extension on the arm is used to lift the front which reveals the monster’s paper eyes. Inside you’ll find an Arduino, breadboard, and battery pack. It’s not visible above, but a distance sensor on the front of the box is monitored by the Arduino. When it detects something in front of it the servo fires up and pops open the lid. The firmware includes a timer so that the monster waits a bit before taking its next peek at the party.

Scrapped DVD Player Turns Into A Full Featured Clock

October 30, 2012 by Mike Szczys 14 Comments

[Dmitry] really went the distance with this project. It started as a broken DVD player scrapped for parts, and turned into this clock with way too many features. That link is a pretty a dry technical collection of the work. You’ll definitely want to have a look at it, but we’d suggest first watching the demo video after the break which is initially much more exciting.

The donor DVD hardware included a Vacuum Fluorescent display which is the nugget which [Dmitry] was after. But that board came along with some other nice things, like an integrated IR receiver. He also chose to use the PSU from the device. An Arduino is used to drive the clock. We’re not sure where he found it, but the video shows the service manual for the DVD player which must have a been a real help in interfacing with the display. The white dome on the right is a PIR motion sensor. It brings the device out of sleep mode when someone is in the room.

The case is laser-cut and started as cardboard to ensure everything fit as designed. The enclosure makes it a showpiece, but the features of displaying day, date, time, and temperature make it functional as well. Since the VFD is alpha-numeric we think this could even see future upgrades to be used as a new-mail/tweet/IM alert as well.